SF/WO* Object Mods

Here is m-48 tank with new camoflage(brown).

Scud-b and pt-76 in green camoflage.
Updated- + bdmr, Barlock, Fansong, jeep and others...

QTO for WOE post Sept 08 patch
 
Once installed this mod should reduce the take off times for whole flights by approx 50%.
It is set up to replace the stock airbases for both the German and Soviet bases and has no light modifications as I don't yet know how to change these.
 
Both German and Soviet airbase 3 are set up for bombers so the spacing is bigger.
 
This mod should not upset the randomly parked aircraft.
 
Installation:-
 
Back up or rename the 8 German and Soviet airbases.(just in case!)
 
Then copy and past the files in this mod to the GermanyCE terrain folder and thats it!
 
CREDITS: baffmeister and csb for their eariler similar mods as it was only by lookin at these that I could figure this out.
 
WAIVERS: I don't mind if anyone wants to use these files for freeware projects. I would prefer this file not be uploaded to any other sites as it may be subject to updates.
 
 
This is the the first file I've uploaded so be gentle with me!

This is just yet another open canopy mod, but I went a bit further... For one, mine covers about every TK sim there is. Under the new code, every plane does something(except A-10,A-7s, and Harriers) The A-6, and the F-8E both have folding wings, and will be in that stance when you see them parked on the taxiways. The A-4 DATA inis include the non floppy deck crash into the carrier deck anomoly already installed! I also included all of the available Mig, and Su aircraft in on this mod too!
 
To install....
1. You need the latest patch (except for SFG)
2. If you have a mutant ninja install, this is set up for you! Just unzip to your sim's folder
3. If you do not have a merged install, you need to extract to a temporary folder, then place the plane folders individually.
4.To use the canopy, or wingfold
5.There are several cockpits available for the Mig-21s, and the Mig-17s, and Mig-19s. To make use of this mod fully, you might want to get some flyable red stuff going!
 
I hope you can make use of these files, they definitely added some immersion to my experience to the sim.
 
 
Good Hunting
Warren

This update removes sudden movements of the tower and repair an error as they have to show the LOD.
 
[LOD001]
Filename=JS-1.lod
Distance=8000 --------------------------error sorry :)
 
[LOD002]
Filename=JS-1_LOD001.LOD
Distance=250
 
[LOD003]
Filename=JS-1_LOD002.LOD
Distance=500
 
[LOD004]
Filename=JS-1_LOD003.LOD
Distance=1000
 
[LOD005]
Filename=JS-1_LOD004.LOD
Distance=1500
 
[LOD006]
Filename=JS-1_LOD005.LOD
Distance=8000
 
And no Gunner

The JS-1

This seat was used in the late F-84F,check your documentation!,and read the README
 
Steve S

Data Ini Fixes for Various Frescos & Farmers - WoV/WoE/WoI
 
This package of data inis is designed to bring various sub-variants of the MiG-17 and MiG-19 family up to the latest, post 9/08 patch standard.
They are designed for use on mods from Madcaddie & howling1s "MigPak", "More Migs Pak" and "Still More Migs Pak", which are available at AvSim. Also included is a data ini for the Cuban MiG-17AS by Starfighter, Pasko's 17PFU, and a couple of mods by me, and some other people I can't remember....
 
The data inis contained herein are modification, per nations and loads, with all the FM updates, taken right from a freshly extracted stock MiG-17F Fresco-C and MiG-19S Farmer-C data inis. This brings in the newly added AI sections, and improved FM to these very old mods...
 
The aircraft 'repaired' by the enclosed data inis are:
 
J-4(IRM)
J-4
J-5A (PLAAF mod of Pasko's 17PFU)
MiG-17AS (by starfighter)
MiG-17F(SF-E)
MiG-17PF (SP-16)
MiG-17PF
MiG-17PFU (Pasko)
 
MiG-19 (IRM mod)
MiG-19F
MiG-19P
MiG-19PM (these 2 by me, The Wrench)
MiG-19SF
F-6 (Shenyang Farmer, Pakistani AF)
 
I've tried to keep the weapons "NationName" and "AttachmentType" as close to stock whenever and wherever possible. I've tried to design this fix for use with any weapons pak ...remember all these aircraft WERE designed with the Bunyap Pak of 6/06 in mind. If you plan to use these with a 'stock' install, you WILL need to add the various weapons called out in their loadout inis. MOST IMPORTANTLY, if you plan on using these with the Mirage Factory Weapons Pak; either the WoI (-which you shouldn't, really-) or the soon-to-be-released WoE version, you WILL have to import various and sundry bits. In particular, the Izumrd radar nose for the 17P/PF/PFU/J-5A, 19P/PM and the nationalized weapons for the Paki F-6 (as their Sidewinder is a mod of the US version, plus their nationalized bombs and rocket pods and suchlike...), plus the 'pylons' necessary for their attachment.
 
Highly detailed information on the various loadouts, and eariler data ini fixes can be found in the CombatAce Knowledge Base, in the "Bunyap Wepons and Loadouts Fixes Thread"
 
http://forum.combatace.com/index.php?showtopic=18346
 
It is highly suggested that you spend some time in there..otherwise, you may have some "issues".
 
Happy Landings
Wrench
kevin stein

This mod replaces the tga file in each skin file .It only works with the newer f-16 F-15 models and the mig-29 .Id like to thank deuce fo his help .I hope you like it?
 
Tony aka hi ho siver
 
Update this is a resized version to fit the tail pipe better..

EA-6B Prowler by Hawker
 
Much appreciated help from Eightlein for the wing fold/canopy open data.ini
Use shift 0 (Zero) for those two animations.
 
and
Capun for his work on fixing serperating the animations and fixing the tailhook problem.
Press H as standard for the hook to retract.
 
I can't really claim any credit for anything other then putting it all together.
 
Thanks again to Capun and Eightlein.
 
Stormtrooper
 
Installation
 
Drop in EA-6B folder and overwrite existing file.
Seriously doubt you'll want to keep the old files.
 
Version 1.0 to fix flight model after reported errors.

This is a little tool to enable you to refuel your aircraft.
 
How to use it ?
 
1- BACKUP the DATA.ini file
2- Launch the exe and select the DATA.ini to patch
3- Check the tanker type to use with a/c (Boom or Drogue). (Boom = 3000lb/mins, Drogue= 1000lb/mins)
4- Apply the patch. That's it.
5- Use your Thrust Vector Key to add fuel
 
Know issues:
 
- The system is based on a "fake" engine. When refueling, you will have the AB sound (no extra thrust) activated on your plane.
- Only player a/c will be refueled
- You cannot apply the patch to any a/c using TV key...
- You can refuel at any time
 
As usual, use it at your onw risk. I'm not resonsible of any bad thing that could happened on your PC by using it ;-). This tool cannot be add to a commercial stuff without my premission.
 
Thanks to STORM and Bpao for Betatesting
 
Enjoy
 
Kreelin

This seat was used in the early model of F/RF-84F,check your documentation!,and read the README for
 
Steve S.

Mod for the F-4E-35 with long gun muzzle (MIDAS IV mod) from 1971-72:
 
This is a small mod to the F-4E-35 Phantom II (available for download here at CombatAce:
 
http://forum.combatace.com/index.php?autoc...p;showfile=1020
 
This version is correct for a Vietnam-era unslatted F-4E model and is a must-have, whereas the F-4E as presented in Wings Over Vietnam has slatted wings (a post-Vietnam modification).
 
During 1971-72 the USAF F-4Es in Southeast Asia were modified with the MIDAS IV extended muzzle for the plane's M61 20mm Vulcan cannon. This presumably helped the issue of ingesting muzzle gases into the engines during the firing of the weapon.
 
I have enclosed the stock F-4E-35 data.ini modified to include the enclosed long gun part. (In my own install I duplicated the entire F-4E-35 by renaming the folder, aircraft.ini and data.ini files all to "F-4E-35LG" and in the F-4E-35LG.ini I renamed the AircraftFullName= to "F-4E long gun").
 
Drop the .LOD file loose into your aircraft folder.
 
My thanks to Dave and the rest of the team which brought you the original F-4E-35 package, and for allowing me to release their original data.ini file with the text entries to allow the long gun to appear.
 
Mike D.

Introduction
========
 
this pack contains pilotmodels for VF-32 . VF-32 operated the F-14 Tomcat untill 2005 before transitioning to the F/A-18F Super Hornet
 
Skinlist
=====
 
VF32_pilot: pilot for VF-32 (with the sword painted on his helmet)
VF32___rio: rio for VF-32 (with squadron badge on his helmet)
 
Installation
=======
 
These pilotskins are based on the models designed by AmokFloo.
 
Unzip, if you wish, into a temporary folder. This works best. All the files in the zip are seperate zips. This allows you to select which or how many pilots you wish to add.
Place your selections in the /Objects/Aircraft folder --do NOT place the files in specific aircraft folder!!
 
If you haven't extracted the data.ini for the aircraft you wish to modify, do so.
If already extracted, open up the **data.ini for your aircraft of choice. In the example below, we are using the F-100D:
 
Find the section marked crew, as below
 
// Crew ---------------------------------------------------------
 
[Pilot]
SystemType=PILOT_COCKPIT
PilotModelName= <-- (left blank in this example)
Position=0.00,4.15,0.88
SeatModelName=seat_f-100
SeatPosition=0.00,3.98,0.45
MinExtentPosition=-0.25,3.52,-0.30
MaxExtentPosition= 0.25,4.83, 1.09
CanopyNodeName=canopy_frame_rear_outer
 
If your data ini does not have the line:
 
PilotModelName=
 
You =MUST= add it.
Then, you can add the pilot figure of choice. Remember, it is case sensitive, so if it's "PILOTAF" you must use all capitals. If it's "PilotCH", you must use the upper and lower case lettering. Adding ".lod" is NOT required.
 
Acknowledgments
============
 
My work is based upon that of AmokFloo. His work served as a foundation and inspiration to create these pilots.
 
If you want to learn yourself how to create/mod pilot skins, I wrote a tutorial at combatace (http://forum.combatace.com/index.php?showtopic=25987)
 
I am a signatory to the Freeware Licensing Agreement (http://forum.combatace.com/index.php?showtopic=26131) so you may use my work on these conditions:
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
 
Now install those skins and start flying.
 
KingAlbert Out

Here is a complete list of IDF squadrons placed into Squadronlist.ini form.
 
Simply drop into your PilotData folder and make the appropriate edits to your individual aircraft's if you want to place it with the correct squadron.
 
Enjoy!
Storm

Opening cockpit canopies for stock WOI aircraft for the August 08 patch !
 
NFG.
 
 
Released under CombatAce Fair-Use terms. Visit the URL below for more info.
 
http://forum.combatace.com/index.php?showtopic=26131

This package includes 8 generic hangars structures with inis and definitions for modders and terrain builders.

A special Target Area for Strike Fighters 1 : this is multiple buildings, a manufacturing complex.All buildings are destroyable and targetable ( in strike missions with SF1 ). Most of these have unique destroyed models.
 
Instalation : unzip and copy/paste all files into Terrain/TerrainName directory, and add lines to TargetList.ini and Typelist.ini files. Place this area wherewer you want on your map.
 
Inside of ZIP pack there are two TXT files included what to copy into a INi files of terrain !!!
 
Report me errors and missing textures !!!

This package contains two COMMS system
 
 
== Installation Instructions: ==
Before installing this Pak, you'll want to back up your SPEECHSYSTEM.ini
 
drop one of SPEECHSYSTEM.ini in your flight folder
 
 
 
the one is more basic
 
the 2 is very detailled
 
 
Credits:
 
sorry
 
i don't know witch people creating the two mods
 
BUT if you try you can't play without them after

makes a windowed version for wov
may work w/ other TW games dunno
 
ALTERNATE:
instead of downloading this file you can change a line in your startup.ini file in your wov directory
1.under the [debug] there is a line that says "WindowMode=FALSE"
cange it to "WindowMode=TRUE"

ZSU-23 in Green camoflage.

ZU-23 in green camoflage.

Sa-2 SAM launcher in grey camoflage.