180 files
-
SF2 LongCrane
By krfrge
SF2_LongCrane
This is freeware from "Yobi.com"
The author is unknown.
This is a modification (painting and adding a large base) to this port crane.
I wish I were this capable at modeling but sadly I am not there yet.
Good eye-candy for the targeted port of your choice.
To add to your terrain of choice simply add the following entry into your terrain_TYPES.INI
[TargetTypexxx] <------- make sure to add your sequence number
Name=LongCrane
FullName=Long Crane
ModelName=LongCrane.LOD
TargetType=MISC
ActiveYear=1941
DamagePoint=100
ArmorValue=0
ArmorType=0
TargetValue=250
UseGroundObject=FALSE
GroundObjectType=
RepairRate=0.150
StartDetectChance=50
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=1000.0
DamagedModel=
DestroyedEffect=DustCloudEffect
DestroyedModel=
SecondaryEffect=LargeOilFire
SecondaryChance=100
Kindest regards - Krfrge
October 2018.
42 downloads
0 comments
Submitted
-
SF2_MobileLongCrane
By krfrge
SF2_MobileLongCrane1
Freeware from "Yobi.com"
Author is unknown.
This is a modification by my of the original (painting and adding a large base) to this port crane.
The crane is oriented against the rollers for stored operations.
To add to your terrain of choice simply add the following entry into your terrain_TYPES.INI
[TargetTypexxx] <------- make sure to add your sequence number
Name=MobileLongCrane1
FullName=Mobile Port Crane
ModelName=MobileLongCrane1.LOD
TargetType=MISC
ActiveYear=1941
DamagePoint=100
ArmorValue=0
ArmorType=0
TargetValue=250
UseGroundObject=FALSE
GroundObjectType=
RepairRate=0.150
StartDetectChance=50
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=1000.0
DamagedModel=Damgd_MobileLongCrane1.LOD
DestroyedEffect=DustCloudEffect
DestroyedModel=Destryd_MobileLongCrane.LOD
SecondaryEffect=LargeOilFire
SecondaryChance=100
Kindest regards - Krfrge
October 2018.
36 downloads
0 comments
Submitted
-
SF2 MobileLongCrane2
By krfrge
SF2_MobileLongCrane2
Freeware from "Yobi.com"
Author is unknown.
This is a modification by my of the original (painting and adding a large base) to this port crane.
The crane is oriented with the rollers for active operations.
I have attempted a damage and destroyed model which are included.
To add to your terrain of choice simply add the following entry into your terrain_TYPES.INI
[TargetTypexxx] <------- make sure to add your sequence number
Name=MobileLongCrane2
FullName=Mobile Port Crane
ModelName=MobileLongCrane2.LOD
TargetType=MISC
ActiveYear=1941
DamagePoint=100
ArmorValue=0
ArmorType=0
TargetValue=250
UseGroundObject=FALSE
GroundObjectType=
RepairRate=0.150
StartDetectChance=50
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=1000.0
DamagedModel=Damgd_MobileLongCrane1.LOD
DestroyedEffect=DustCloudEffect
DestroyedModel=Destryd_MobileLongCrane.LOD
SecondaryEffect=LargeOilFire
SecondaryChance=100
Comments are encouraged and welcomed.
Kindest regards - Krfrge
October 2018.
42 downloads
0 comments
Submitted
-
BTR-50
By GKABS
Hello and thank you for downloading my work.
What's included:
all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
there are 2 skins for the model and I have made a bump file.
Installation:
Copy folder to Objects/GroundObject and the following to _TYPES.ini file
[TargetTypeXXX]
Name=BTR-50
FullName=BTR-50 APC
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-BTR-50
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=GK-BTR-50-Destroued
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and the skins
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
The gunner - skin form SP1
And finally not to forget the wonderful site of https://combatace.com and all the nice member's and their dedicated support for this game.
If you need any assistance please contact me at
gkabs@gkabs.net
146 downloads
0 comments
Updated
-
SF2_9P149 Shturm-S
By Richo
Yakarov79 9P149 Tank Destroyer
9P149 Shturm-S
Hello Everyone, Yarkarov79 came up with 9P149 Tank Destroyer with no INI with it so I created one for his great piece of work.
I did some research on the 9P149 and based all my ini work on this. Of course all the secrets are not revealed so I made some guesses on this little devil. "9P149 will live up to its name if added to the game." I have tested this in SF2E latest version with all games merged. Works just like the Soviet's intended it to work. Do not fly low and slow or you will for sure be flaming burnt toast with this little Storm hanging around on the Battle field.
The 9P149 launches the 9M114 Kokon Missile and made this one from someone’s 9K114 lod. I do not know who owns this one or who it belongs too, so thank you for your great work as well.
Please let me know who owns it so I can give credit.
/// ----------------Install Instructions------------------ ///
Take the 9P149 from the Ground Objects folder and copy and paste it in to your Ground Objects folder. Then take the 9M114 missile from the Weapons folder and copy and paste it into your Weapons folder.
/// Credits --------------///
Yakarov79 for the lod and skins.
Mue's tool box
??? for the 9K114 missile lod.
Special thanks for the rest of the Combat Ace Strike Fighters community for the inspiration and hard work everyone does.
Me Richo for the research and ini file for Yakarov79's 9P149
Please Enjoy!
Cheers
Richo
126 downloads
0 comments
Updated
-
SF2_MT-LB APC
By Richo
Yakarov79's MT-LB APC
Hello Everyone, Yarkarov79 came up with a Soviet MT-LB APC with no Data ini with it so I created one for his great piece of work. This APC comes with three skins Camo, Green, and Tan.
"Only for FREEWARE CombatAce use"
I created the Data ini for Yakarov79's MT-LB APC using information from Wikipedia. This is a good all-rounder to have in all the SF2 series and mods. This unit has been tested in SF2E latest version with all games merged.
/// Credits ----Special Thanks to:
--Yakarov79 for the lod and skins.
--Gun creater for the 12MM_NSVT
--Mue's tool box, a must have tool.
--Especially for the rest of the community for the inspiration and hard work everyone does.
Please Enjoy!
Cheers
Richo
98 downloads
0 comments
Submitted
-
ASTROS
By strahi
This is a model of the MLRS system of the Brazilian army. Anyone who has a desire can freely further develop it.
91 downloads
0 comments
Updated
-
SF2 Short Take off and Landing Airfield v0.1
By krfrge
SF2 Short Take off and Landing Airfield v0.1
This is my attempt to create a small 830m STOL Airfield for SF2. It was built using Blender. I have tested O-1's and OV-10's and the runway is long enough for them to get airborne. The drones MQ-1, MQ-1C and MQ-9 work well from this field as well.
Installation:
Take items from "Drop into terrain folder" and place them into your terrain folder.
Add the following entry into your terrain TYPES.ini
[TargetTypexxx] <---- Change to the next number at the
Name=RunwaySTOL bottom of you types listing
FullName=Runway
ModelName=RunwaySTOL.LOD
TargetType=SMALL_RUNWAY
ActiveYear=0
TargetValue=1000
UseGroundObject=FALSE
DamagePoint=140.0
ArmorValue=0.0
ArmorType=0
RepairRate=10.0
StartDetectChance=100
StartIdentifiedChance=50
IncreaseDetectChanceKey=10
MaxVisibleDist=10000.0
ZBufferOffset=6.000000
FlatObject=TRUE
DamagedModel=
DestroyedEffect=
DestroyedModel=
SecondaryChance=0
Add the following entry into your terrain TARGETS.ini
[TargetAreaxxx]
Name=San Roque Airstrip
Position=x.00,x.00
Alignment=FRIENDLY
Location=2
AirfieldDataFile=RunwaySTOL_DATA.ini
ActiveYear=0
Radius=4313.708984
Target[001].Type=RunwaySTOL
Target[001].Offset=-195.00,-1.00
Target[001].Heading=0
Target[002].Type=CIVIL_TOWER
Target[002].Offset=-245.00,180.00
Target[002].Heading=0
Target[003].Type=STR_HAN6
Target[003].Offset=-344.00,221.00
Target[003].Heading=-90
Target[004].Type=FLOODLIGHT12M
Target[004].Offset=-363.00,149.00
Target[004].Heading=-135
Target[005].Type=FLOODLIGHT12M
Target[005].Offset=-276.00,148.00
Target[005].Heading=135
Target[006].Type=BLASTSHIELD
Target[006].Offset=-289.00,156.00
Target[006].Heading=0
Target[007].Type=TRACTOR
Target[007].Offset=-301.00,151.00
Target[007].Heading=0
Target[008].Type=FLOODLIGHT12M
Target[008].Offset=-363.00,294.00
Target[008].Heading=-45
Target[009].Type=FLOODLIGHT12M
Target[009].Offset=-276.00,295.00
Target[009].Heading=40
Target[010].Type=PIT1
Target[010].Offset=-298.00,283.00
Target[010].Heading=180
Target[011].Type=CRATE
Target[011].Offset=-330.00,293.00
Target[011].Heading=0
Target[012].Type=SUPPLIES
Target[012].Offset=-333.00,293.00
Target[012].Heading=0
Target[013].Type=PALLET
Target[013].Offset=-334.00,288.00
Target[013].Heading=0
Target[014].Type=PALLET03
Target[014].Offset=-348.00,287.00
Target[014].Heading=35
Target[015].Type=FORKLIFT
Target[015].Offset=-346.00,281.00
Target[015].Heading=-120
Target[016].Type=UNIMOG
Target[016].Offset=-340.00,280.00
Target[016].Heading=120
Target[017].Type=MAINT SHED
Target[017].Offset=-349.00,194.00
Target[017].Heading=-180
Target[018].Type=PIT1
Target[018].Offset=-350.00,162.00
Target[018].Heading=90
Target[019].Type=MAINT CART
Target[019].Offset=-342.00,195.00
Target[019].Heading=-55
Target[020].Type=MSTAND1
Target[020].Offset=-338.00,232.00
Target[020].Heading=0
Target[021].Type=AIRSTARTUNITC
Target[021].Offset=-329.00,213.00
Target[021].Heading=-90
Target[022].Type=COMMTRAILER1
Target[022].Offset=-313.00,152.00
Target[022].Heading=85
--NOT FOR USE IN ANY PAYWARE--
Please credit me if you modify.
Any issues, contact me here at Combat Ace.
Krfrge
23 March 2019
78 downloads
0 comments
Updated
-
vbtp-mr-guarani VBTP-MR-Guarani
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
VBTP-MR-Guarani model
GK-VBTP-MR-Guarani.001.LOD
GK-VBTP-MR-Guarani.002.LOD
GK-VBTP-MR-Guarani.003.LOD
GK-VBTP-MR-Guarani.Destroyed.LOD
6 Skin for the model
all my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the folder to Objects/GroundObject and the falowing to _TYPES.ini file
[TargetTypeXXX]<-------- Change to the next number at the bottom of you types listing
Name=VBTP-MR-Guarani
FullName=GK-VBTP-MR-Guarani
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-VBTP-MR-Guarani
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=GK-VBTP-MR-Guarani.Destroyed.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
f you need to change the skin please just rename the one you want to use to VBTP-MR Guarani-2.jpg
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and skins
the soldier model is free from the net with the skin.
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
If you need any assistance please contact me at
gkabs@gkabs.net
112 downloads
0 comments
Updated
-
Zastava-M55 AAA
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Zastava-M55 model
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
[TargetTypeXXX] <-------- Change to the next number at the bottom of you types list
Name=GK-Zastava-M55
FullName=GK-Zastava-M55
TargetType=AAA
;TargetType=MISC
UseGroundObject=TRUE
GroundObjectType=GK-Zastava-M55
ActiveYear=1960
TargetValue=25
RepairRate=3.22
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=Truck_DESTROYED.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.1.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Coupi for making all the data files and testing the model.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
Video by Coupi
199 downloads
0 comments
Updated
-
zastava-m55 Zastava-M55 Single AAA
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Zastava-M55 model
All my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the folder to Objects/GroundObject and the falowing to _TYPES.ini file
[TargetTypeXXX]<-------- Change to the next number at the bottom of you types listing
Name=Zastava-M55-S
FullName=Zastava-M55-S AAA
TargetType=MISC
ActiveYear=0
TargetValue=100
UseGroundObject=TRUE
GroundObjectType=GK-Zastava-M55-S
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
SecondaryEffect=VehicleFireEffect
DestroyedModel=Truck_destroyed.LOD
SecondaryChance=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and skins
Strahi for testing and making the data file big help many thanks.
Soldier model free form net and skin by me.
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice member's and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
124 downloads
0 comments
Updated
-
BTR-40
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
BTR-40 model
All my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the folder to Objects/GroundObject and the falowing to _TYPES.ini file
[TargetTypeXXX] <-------- Change to the next number at the bottom of you types listing
Name=SovietBRDM
FullName=BRDM
TargetType=MISC
ActiveYear=0
TargetValue=0
UseGroundObject=TRUE
GroundObjectType=GK-BTR-40
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
SecondaryEffect=VehicleFireEffect
SecondaryChance=50
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and skins
yakarov79 and Crusader for Sending the model file to study big help.
Coupi for sending me a great link for information and a photo of the model.
http://www.krasnayazvezda.com/terre/materiels/transport_troupes/btr40.php
Stratos for sharing with me the PSP Weathering Layer file
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
Many thanks to you all.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
120 downloads
0 comments
Updated
-
Giraffe 2D radar and 3d radar
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Giraffe 2D radar and 3d radar were requested by strahi.
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the folder to Objects/GroundObject and the following to _TYPES.ini file
[TargetTypeXXX] <-------- Change to the next number at the bottom of your type listing
Name=GK-Giraffe-R2D
FullName=Giraffe 2D radar
TargetType=AAA
UseGroundObject=TRUE
GroundObjectType=GK-Giraffe-R2D
ActiveYear=1985
TargetValue=250
RepairRate=0.555
StartDetectChance=80
StartIdentifiedChance=20
IncreaseDetectChanceKey=10
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
SecondaryEffect=VehicleFireEffect
SecondaryChance=50
[TargetTypeXXX] <-------- Change to the next number at the bottom of your type listing
Name=GK-Giraffe-R3D
FullName=Giraffe 3D radar
TargetType=AAA
UseGroundObject=TRUE
GroundObjectType=GK-Giraffe-R3D
ActiveYear=1985
TargetValue=250
RepairRate=0.555
StartDetectChance=80
StartIdentifiedChance=20
IncreaseDetectChanceKey=10
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
SecondaryEffect=VehicleFireEffect
SecondaryChance=50
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model (everything except the truck chase) and skins
strahi for testing and making all the data file for the 2 models, big help many thanks, and I hope you will enjoy your request.
The truck model is a free form https://free3d.com/ by ysup12
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
220 downloads
0 comments
Updated
-
T-67 main battle tank
By Gepard
T-67 main battle tank (standard tank) (What if)
*************************************************************
This mod is made for SF2.
----------------------------------------------------------
I. History
What if the soviets would have introduced the Object 167 into service?
Object 167 was the successor of the T-62 (object 166) with a new suspension system (was later used on T-72) and a new turbo diesel engine with 700 hp instead 580 hp in T-62.
Top speed of the tank was 65 km/h on road, 40 cross country. Range around 450 km. So it was comparable with a Leopard 1 tank, but had a much better armour.
There were some versions of object 167. One with gas turbine (helicopter engine), one with 100mm gun D-54TS (comparable with britisch L-7 gun) and one with 115mm smoothbore gun and ATGM Maljutka (AT-2 Sagger)
The T-67, i present you here, is the version of object 167 with the D-54TS 100 mm gun.
-----------------------------------------------------------------------
II.
CREDITS:
The LOD file is made:
~~~~~~~~~~
by TK
The skin based on:
~~~~~~~~~~~~~
TK's stock skin, modified by me.
Implementation of tactical numbers and insignias on the turret are mady by me.
The data.ini is made :
~~~~~~~~~~~~~~~~
by TK
and modded
by me
----------------------------------------------------------
III.
INSTALLATION:
-Unzip the folders into your object folder
----------------------------------------------------------
IV.
For remarks, comments, bugs, etc please use the forum or send me a PM.
-------------------------------------------------------------
V.
The T-67 are FREEWARE. COMMERCIAL USE IS NOT ALLOWED!
The additionally parts are NOT FREEWARE. Please check the readme of that files.
------------------------------------------------------
Hope you enjoy it.
Michael (Gepard)
Made in Germany
July 2019
88 downloads
0 comments
Submitted
-
Mistral missile manpads
By GKABS
MISTRAL MANPADS mod by GKABS
Only for SF2
1) Historical background
MISTRAL MANPADS is a very short-range air defense weapon system, firing the MISTRAL, latest generation fire-and-forget missile.
It features a lightweight man-portable launcher. It can be easily transported and operated from the ground, a vehicle, a building, or a ship. MISTRAL MANPADS is normally operated by a gunner and a crew commander. However, if the mission is carried out in a simple tactical environment, it can be operated by one single soldier.
MISTRAL is a man-portable, fully digital, heat-seeking missile, designed to meet the requirements of all branches of the armed forces. It boasts a 97% proven success rate and higher reliability than any other existing low-level air defense missile.
Type Manportable surface-to-air missile
Place of origin France
Specifications
Length 1.86 m
Diameter 90 mm
Crew 2
Effective firing range up to 6 km
Warhead High Explosive with high density tungsten balls
Warhead weight 2.95 kg
Laser proximity or impact triggered
Engine Solid Rocket Motor
Maximum speed 800 m/s, approx. Mach 2.6 (high supersonic)
Guidance
system
Infrared homing
2) Installation in your Strike Fighters 2 installation
copy to object folder
3) Copy the files to Objects folder and add the falowing to _TYPES.ini file
[TargetTypeXXX]
Name=MANPAD_Mistral
FullName=MANPAD_Mistral
TargetType=SAM_LAUNCHER
UseGroundObject=TRUE
GroundObjectType=MANPAD_Mistral
ActiveYear=1989
TargetValue=100
RepairRate=0.550
StartDetectChance=80
StartIdentifiedChance=20
IncreaseDetectChanceKey=10
MaxVisibleDist=5000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=
SecondaryEffect=VehicleFireEffect
SecondaryChance=0
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
4) Credits
- Thirdwire
- yakarov79 for mistral missile model and skin (Thank you, excellent job on the model ;))
- Coupi for creating the data files, and testing. From the bottom of my heart thanks.
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
Fuse
If you need any assistance please contact me at
gkabs@gkabs.net
172 downloads
0 comments
Updated
-
Static F-16 scene
By guuruu
F-16 static object.
===============
You can add this scene to your airbases.
HOW TO USE IT ?
------------------------------
1. Copy files to your MODS folder.
2. Follow [add to -------] READMEs (add to SOUNDLIST, add to terrain _TYPES).
3. Use Mue's TargetAreaEditor to place F-16 on your map.
CREDITS :
-----------------
1. 3d is mix of free 3d models available in net.
2. Ground crew adapted by GKABS.
3. Testers: Wrench,
4. All bugs by guuruu.
Have fun.
Wojtek
82 downloads
0 comments
Submitted
-
Volkswagen Type 3
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
VW T3 model
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
[TargetTypeXXX] <-------- Change to the next number at the bottom of you types list
Name=VWT3
FullName=GK-VWT3
ModelName=GK-VWT3.LOD
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-VWT3
DamagePoint=140.0
ArmorValue=24516080.0
ArmorType=2
RepairRate=0.150
StartDetectChance=20
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
CollisionMesh=
DamagedModel=
DestroyedEffect=MediumShortStructureCollapse
DestroyedModel=BUILDING1_DESTROYED.LOD
SecondaryChance=100
SecondaryEffect=LargeFire
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
70 downloads
0 comments
Updated
-
M106A3 mortar carrier
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M106A3-MC model with 14 textures
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=50cal
SoundFileXXX=Mortar
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[50cal]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[Mortar]
Priority=NORMAL
Looped=FALSE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Big thanks to guuruu for fixing my mortar dataINI and adding these explosion effects and everyone who replied to my question and offered to help
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
99 downloads
0 comments
Updated
-
Pantsir S1 missile system (SA-22 Greyhound)
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
SA-22 Greyhound / Pantsir-S1 model and 4 textures.
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Michael Weinert for the model and the textures.
guuruu for fixing my data files and testing the model and making the missile hit the target as it should.
compufat for the missile /model textures
Me for compiling the textures and the data files.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
PS. I forgot to upload these two photos for the winter texture.
262 downloads
0 comments
Updated
-
M113 ACAV 60's and 70's
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M113 ACAV 60' and 70's model with 15 textures
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=50cal
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[50cal]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
126 downloads
0 comments
Updated
-
M113 ACAV 80's
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M113 ACAV 80's model with 19 textures
two armed ambulances (i know it is not realistic but it is there)
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=50cal
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[50cal]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
90 downloads
0 comments
Updated
-
M113 ACAV 90's and 2000
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M113 ACAV 90's model with 18 textures
M113 ACAV 2000 model with 18 textures
the only changes are the crow helmet shape and uniform color
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=50cal
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[50cal]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
142 downloads
0 comments
Updated
-
M577-CPC with command tent
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M577-CPC 80s up to 2000 and after with a command tent ith 10 textures
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
158 downloads
0 comments
Updated
-
M577 CPC field hospital
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M577-CPC field hospital
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
72 downloads
0 comments
Updated
-
3 different ANTPS-77 Tactical Radar models
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
3 different ANTPS-77 Tactical Radar models each with 2 textures.
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
add this to your soundlist.ini under the Flight folder if you don't have it listed there.
SoundFileXXX=ANTPSRadialEngine
[ANTPSRadialEngine]
Priority=LOW
3DSound=TRUE
Looped=TRUE
NumBuffers=2
DopplerEffect=FALSE
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=50
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
This was requested by my friend strahi.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
242 downloads
0 comments
Updated
-
Download Statistics
14,207
Files12,488
Comments26,858
Reviews