Spinners Posted February 26, 2011 Posted February 26, 2011 Convair Vancouver B.1 - No.18 Squadron, RAF Bomber Command, 1956 1 1 Quote
the test pilot Posted February 27, 2011 Posted February 27, 2011 Mine: Wonderful fernir! Are you going to release for SF2? Quote
+Heberth Posted February 27, 2011 Posted February 27, 2011 but of course! but he loses the ability to supercruise, which is possible in WOI... Quote
+EricJ Posted February 27, 2011 Posted February 27, 2011 An F/A-18F of VFA-14 egresses after striking a target deep in Indian territory. 1 Quote
Spinners Posted February 27, 2011 Posted February 27, 2011 Yakovlev Yak-9U - Vietnamese People's Air Force, 1948 Quote
PraetorH Posted February 27, 2011 Posted February 27, 2011 (edited) Hi all, still weaking my Marine-Skyray. The pilot still has Air-force rank insignia, but I will change that later. And here are the new toys for the Luftwaffe... "A est pour Allemagne" Critics and suggestions are welcome :) Edited February 27, 2011 by PraetorHonoris 1 Quote
+sony tuckson Posted February 27, 2011 Posted February 27, 2011 nice work, I think you should try to put registration near the end of fuselage, would fit better I think.... Quote
mdatelmi Posted February 27, 2011 Posted February 27, 2011 (edited) Very nice set PH...specially the first and the last one. Blistering KF-1 shot Marco! Many thanks Spinners! Some fast shots... Edited February 27, 2011 by mdatelmi Quote
+EricJ Posted February 28, 2011 Posted February 28, 2011 Heading to the range for gun run practice. 2 Quote
PraetorH Posted March 1, 2011 Posted March 1, 2011 Again thanks, the Skyray is almost finished. I will test it next weekend and then upload if everything is alright. nice work, I think you should try to put registration near the end of fuselage, would fit better I think.... I thought about that, unfortunatly on the fusalage the decal can only be moved as far back as the wing ends. Does anyone know how I get the decal on the part of the fuselage behind the wings? PS Valkyrie is the very definition of overkill! Can you hit anything at that speed? Quote
+Wrench Posted March 2, 2011 Posted March 2, 2011 if it's the stock 3W Mirage 3 .... here's what I used for the OzMirages (and the nose gear door numbr positioning, too) [Decal015] MeshName=Tail DecalLevel=2 DecalFacing=RIGHT FilenameFormat= Position=-4.70,0.1 Rotation=0.0 Scale=0.8 DecalMaxLOD=3 [Decal016] MeshName=Tail DecalLevel=2 DecalFacing=LEFT FilenameFormat= Position=-4.70,0.1 Rotation=0.0 Scale=0.8 DecalMaxLOD=3 [Decal017] MeshName=nose_gear_door3 DecalLevel=2 DecalFacing=BOTTOM FilenameFormat= Position=0.0,3.57 Rotation=0.0 Scale=0.4 DecalMaxLOD=3 adjust decal# accordingly (15,16,17) wrench kevin stein Quote
PraetorH Posted March 2, 2011 Posted March 2, 2011 (edited) Great, thanks a lot! I can't say I like the reg back there, but I will certainly put some decal in or something on the skin, because it looks quite empty... ... and don't worry, it will not get AIM-4. I was just testing a bit. Edited March 2, 2011 by PraetorHonoris Quote
Wodin Posted March 2, 2011 Posted March 2, 2011 @mdatelmi...is that screenshot a plane hitting the sound barrier? If so how do you get that effect? Quote
mdatelmi Posted March 2, 2011 Posted March 2, 2011 @mdatelmi...is that screenshot a plane hitting the sound barrier? If so how do you get that effect? Yes... it's a default effect of the plane. Quote
+Wrench Posted March 2, 2011 Posted March 2, 2011 eeeeewwwwwwwwwww ---- aim-4!!!! wrench kevin stein Quote
+sony tuckson Posted March 2, 2011 Posted March 2, 2011 miam don't hesitate to fire ICQ up once in awhile ;) Quote
+Wrench Posted March 3, 2011 Posted March 3, 2011 in respone to daddyairplanes question in another thread in this forum pity my 44+*num* decals won't work ... bleeds out the fueselage bmp. So, just go with stock and few old ones (that work!) JV-44, late 1947 (hurridly re-equipped from standing RAF stock) wrench kevin stein 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.