Leaderboard
Popular Content
Showing most liked content on 07/28/2022 in Files
-
3 points
Version 1.0.0
55 downloads
This is the skin i made of the 65th Aggressor Squadron F-35 of the USAF. The skin it self is not completely accurate or perfect. i didn't put much time or effort into the skin so feel free to make any adjustments. The 65 AGRS was previously active at Nellis from 2005 to 2014. they were recently reactivated and will use F-35s to simulate enemy jets. the strange camo of the F-35 replicate the camo on the J-20. For more info : https://www.thedrive.com/the-war-zone/air-force-unveils-first-f-35-aggressors-dedicated-to-chinese-threats -
1 point
Version 1.3
1,851 downloads
F-22A Raptor Add-on October 13th, 2021 (1st Release) by yakarov79, baffmeister, Crusader, guuruu and Menrva >For Strike Fighters 2 games This is a high quality add-on of the F-22A Raptor aircraft. The original model had been made by Heberth, and it was released in alpha stage. Upon noticing room for improvement, yakarov79 helped finalize the 3d model with numerous, additional details; accurate pylons and rail launchers, new external fuel tanks, highly detailed rack and small diameter bomb 3d models, canopy and thrust-vectoring animations, high-res skin with specular and bump maps, updated cockpit model, and so on. A realistic, well-thought flight model has been produced by our expert, baffmeister. Moreover, Crusader offered his great expertise to improve upon his previous modification for the Raptor's avionics. All their efforts have raised the quality bar of the project I had started; much credits to them all. I further polished the package by adding historically accurate weapon loadouts, my selection of sounds (including authentic engine samples by guuruu), realistic camouflage shapes and colours, reworked decals for the actual USAF's F-22A squadrons, new cockpit textures and other tweaks here and there. Each squadron has got historically correct serial numbers, and they appear in chronological order in the loadout screen; the serial numbers at the bottom of the list are those of aircraft that joined that squadron for last, while the serials at the beginning of the list indicate those aircraft that were available to that squadron for first. Like you would expect in an opera omnia, I even reproduced three unique paint schemes of real Raptors; the air superiority camouflage of the EMD 91-4001 Prototype of September 1997, the temporary "Blue Nose" decoration of the "Cripes A'Mighty" Raptor assigned to the 149th Fighter Squadron in April 2010, and a generic Mid-Production livery sporting the markings of the last Raptor ever produced that flew for the first time in March 2012. Templates by yakarov79, tweaked by yours truly, are included for your skinning fantasies. Notes: -The cockpit is not yet accurate, as various details couldn't be reworked due to RL and time constraints. We were working on a brand new cockpit with accurate HUD and displays. Slimers with correct illumination were also planned. Hopefully they will be a thing in a future re-release. -The aircraft folder is named "F-22A", just like the one included in a number of mod packages which use an old 3d model by Dels. In order to avoid mismatches and bugs of any sort, it's highly suggested to either remove or rename the aircraft folder using Dels' Raptor 3d model. -GPS guidance bombs (EOGB) do not work as intended in SF2, there are issues about them not locking on target and about AI behaviour. The GBU-39 has been set as an EOGR, so it works like a missile; this is a needed workaround to have them loaded properly on a rack while keeping the GPS guidance property. -You need to tweak the SoundList.ini file in order to fully experience any new sounds. Read "(Add to SoundList)" for further details, and remember to extract the SoundList.ini file from the FlightData.cat archive, if you do not have a custom one in your mod folder already. >Credits (in no particular order): -Heberth, for making this (once forgotten) fantastic 3d model. -Julhelm, for sharing the files of his superb F-22A cockpit 3d model, allowing yakarov79 to improve upon it. -yakarov79, for his invaluable help in finalizing the 3d model and remaking the base textures; you have my gratitude. -baffmeister, for his excellent flight model; it's thanks to him if this beauty flies as good as it looks. -Crusader, for reworking the avionics enhancement made for Julhelm's F-22A cockpit, and for improving the AIM missiles. -guuruu, for sharing his RWR symbols improvement mod and for making better engine sounds. -ravenclaw_007, for the AIM missiles from his top notch Weapons Pack 2, the GBU-32 JDAM bomb and the ACES II seat 3d models. -viper63a, for his old F-22A USAF Raptors Redux package, from which I borrowed decals. -simonmiller416, for his smokeless rocket effects mod. -mue, for his LOD Viewer which helped immensely in the making of the skins. -Cocas, for further help given to Heberth for the aircraft's 3d model. -My girlfriend, for supporting me in all of my endeavours. Additional ReadMe files by yakarov79 and baffmeister have been included among few others; be sure to read those to know about their work in better detail. >Disclaimer: This is a freeware; yet it can be redistributed ONLY in other CombatACE mods/mod packages. This mod may NOT in any way, shape or form be used in any payware additions. -
1 point
Version 1.0.1
98 downloads
Here to get 30sm And basically I made two version of Russian Naval Air Force (BMPφ) Skin for Su-30SM,u can see them in screenshoot page. (I used some oldder version Su-30SM's tex for some parts of mine work,I dont really remember who made that but Thank you for your work!!!) Also I provide data.ini and loadout.ini,I just do some changes to make them act close to reality,hope u guys enjoy. Recommand step: [Squadronxxx] Name=43rd RGT,BMP DisplayName=43rd Attack Regiment,BMP Nation=Soviet to your SQUADRONLIST.INI seeya -
1 point
-
1 point
Version 1.0.0
429 downloads
July 2021 =============== Royal Netherlands Air Force NF-5A Freedom Fighter Volume II VERSION 1.0 ------------------------------------------------------------ We are proud to present the NF-5A RNLAF, the Canadair variant of the Northrop F-5a, one of the most enduring American military aircraft designs ever produced during the Cold War period. The Canadair NF-5A was essentially similar to the Canadian AF CF-5 but introduced several modifications, the most important being the more powerful J-85Can-15 engines, Doppler radar navigation system, arrestor hook, two large split air intake doors aft of the main wing trailing edge on both sides of the fuselage to provide extra air to the engines (later also used for F-5E type), and provision to carry the larger 275 gallon under-wing fuel tanks. The aircraft also featured maneuvering leading edge flaps, a strengthened windscreen, and was the only F-5a to operate a two position nose gear. It has been our goal to provide to the simmer a highly detailed model and texture base which preserve the beautiful lines of this aircraft; and to engineer flight model files and a cockpit/gauge file-set that are authentic and add to the immersion of the flying experience within the Strike Fighters 2 series. INSTALLATION INSTRUCTIONS: -------------------------- 1. Copy the contents of the "To Mods Folder(s)" to your SF2 Mod directory. Allow directory merging and overwrites, provided the overwrites pertain to "fake pilot" entries, as well as weapons made by ravenclaw_007, which are included in this and many other releases. 2. Add the entries of "ADD_TO_SOUNDLIST.txt" to your SOUNDLIST.INI (located in the "user\Saved Games\ThirdWire\StrikeFighters2\Flight" folder).If one does not exist, then you will need to extract it using the 3rdWire CAT extract utility. You are simply required to substitute the "XXX"s with the next sequential number in the sound file section of the file. NOTE 1: ------------ Both Regular and Higher resolution cockpit textures are included in their own distinct folders in the package. The user may alternate between the two by "commenting out" the relevant line in the NF-5A_COCKPIT.INI [CockpitData] Directory=cockpit <---This is the default //Directory=cockpit_Lo-Fi In order to "activate" the higher resolution textures you would decomment the previous line and comment out the next line, thus: [CockpitData] //Directory=cockpit Directory=cockpit_Lo-Fi <---This is now Low-Res NOTE 2: ------------ Another frame-rate friendly option for those with older hardware is to use the Next level of Detail Model as the primary external model. This simply involves changing the first line in the F-5A_HAF.ini from this.. [LOD001] Filename=NF-5a.LOD to this.. [LOD001] Filename=NF-5a_002.LOD Much effort was made to provide those with lower end systems an alternative lower poly-model to be able to enjoy the F-5a, so please take advantage of this _002.LOD model should you experience frame-rate issues. While not as "rounded" as the Higher poly version, it is nonetheless just as detailed and extensive. NOTE 3: ------------ For those who may find loading times excessive, the .jpg files in the texture folders can be reduced to 50% of their size without sacrificing too much surface detail. Keys: ------- SHIFT+0 -> canopy open -/= (Default thrust vector Keys) -> elevator trim CREDITS: Sophocles - 3D Model, Cockpit, textures Ravenclaw_007 - Project "God-Father" 3D Modeling, Animations, Weapons, Research, Beta testing Baffmeister - Flight model, weapons edits, Avionics, Beta testing Soulfreak - Decals, Research, 2 F-16 Camo scheme skins and 2 NATO scheme skins Crusader - Avionics and data tweaks, Beta testing Guuruu -Sounds and Afterburner effects, Beta testing Guest contributors: Gkabs - pilot figure Logan4 - Avionics tweaks, radar ranging gunsight. Cliff7600 -Avionics tweaks, functioning horizontal trim indicator Special Thanks to the staff and members of Combatace.com whose passion and efforts have enabled this game to endure, and to provide so much fun and excitement! Additionally, many thanks to the following Combat-Ace Modders, who either actively contributed to the project over the years, or who invested their time either providing much needed hints and help, or researching various aspects of the model. Brain-32 - Modeling advice, initial cockpit.cfg + more NeverEnough - Initial work on the Flight model Russouk2004 - Always answering questions when I needed help..Cheers!! Derk - Many, many references!!! Blade - Excellent mini-tutorial on damage textures Finally, thanks to TK and Thirdwire for creating such a fantastic game. **************************************************************** FEATURES: * A highly detailed external 3d model, including all features specific to the NF-5A including "F-5E" type Nose gear, animated auxiliary engine doors, arrestor hook, underside air intakes for the more powerful engines, external chaff and flare dispensers, and 275 gallon external wing tanks. * Specular color and Normal (bump) maps. * Seven Level of Detail models (LODs), providing an almost seamless transition from distance to distance; and perhaps more importantly, ensuring that the frame-rate "impact" of the aircraft is as low as possible. * Two sets of highly detailed external Fuel Tanks by ravenclaw_007; both the 150 gallon Factory tanks and the 275 gallon variants; the NF-5A being the only F-5a variant to carry them. *Functioning AN/ALE-40 Chaff and Flare dispensers exclusive to the RNLAF NF-5A * Extensively fine-tuned flight parameters in the aircraft data configuration files, emphasizing the NF-5A's agile and highly maneuverable characteristics - courtesy of Baffmeister. * Functioning maneuvering flaps deployable up to 450 knots, which allow for tighter sustained turns .. also credited to Baffmeister. * 5 high resolution texture sets; thoroughly researched historic depictions of the Aircraft fielded by many RNLAF Squadrons. * Quality sound-set included. Base sounds, by Guuruu, were sourced from existing recordings of various aircraft at air-shows and were modified to match the prominent characteristics of the F-5A General Electric turbojets, the "buzz" of the M39 Pontiac 20mm machinegun, and the flap/Air-brake, undercarriage deployment and retraction sequences of the Freedom Fighter. * Super detailed dedicated NF-5A 'Virtual Cockpit' with animated throttle control, rudder pedals, control stick, landing gear lever, canopy, canopy lever, drag-chute lever, weapons selectors and weapon station arming flick switches, ..and more. *Accurate and functional representation of the Saab RGS2 lead computing gun sight, with accurate aiming mark (Mechanics by Crusader and Logan4). * A full complement of highly (or should I say "insanely" detailed weapons carried by the RNLAF NF-5A, all by ravenclaw_007. * Comprehensive RNLAF Loadouts representing the weapons carriage evolution of the NF-5A in Dutch service from 1972 to the 1991 by ravenclaw_007. * Complex animation of canopy opening mechanism, and animated Turbine blades; both thanks to ravenclaw_007. * GKAB's superb highly detailed crew figure with authentically modeled oxygen mask and flight helmet. * All new afterburner, emitter, and engine smoke effects by Guuruu. * Saab RGS2 lead computing gun sight with both Air to Air and Air to Ground modes. * Functioning elevator trim controls and gauge, using the Thrust Vector Controls; courtesy of Cliff7600. ****************************************************** PILOT NOTES ----------- NF-5A Limit and Reference Speeds. [Indicated Airspeeds] FLAPS (FULL DEFLECTION): 300kts for both leading and trailing edge. FLAPS (MANOUEVERING): 450kts for both leading and trailing edge NOTE: The F-5A uses full flaps for take off but due to a game bug you must manually select full flaps for take off when player flown. The AI will use full flaps although you can hear the flap sound cycling between flap 1 and flap 2. LANDING GEAR: 240kts DRAG CHUTE: 165kts CANOPY: 50kts NOSE WHEEL STEERING: 65kts MAXIMUM INDICATED AIRSPEED: 710kts [redline] MAXIMUM MACH: 1.72 Mach design limit but thrust/drag limited to about mach 1.50 in a 60deg dive from 50,000ft. -------------------------------------------------------------------------------------------------------------------------------- TAKE OFF ROTATION SPEEDS 13500lbs: 155kts [full internal fuel and two sidewinders] 20500lbs: 195kts [about the maximum weight possible with included stores] NOTE: Use full flaps for take off! Adding 6kts for every 1000lbs above 13500lbs should give good aft stick/rotation speeds. -------------------------------------------------------------------------------------------------------------------------------- CLIMB SPEEDS Military Power 13500lbs: 375kts with a transition to mach 0.89 20500lbs: 310kts with a transition to mach 0.74 Maximum Power 13500lbs: 595kts with a transition to mach 0.93 20500lbs: 480kts with a transition to mach 0.85 ------------------------------------------------------------------------------------------------------------------------------- FINAL APPROACH SPEEDS With 500lbs fuel remaining and some empty racks use 160kts. Add 5kts for every additional 500lbs of fuel. NOTE: Target touch down speed is 20kts less than final approach speed. ---------------------------------------------------------------------------------------------------------------- RGS2 Gunsight -------------------------------------------------------- We have simulated the two main modes of the sight, one for Air to Ground, and one for Air to Air. The Air to Ground reticle assumes 3 different levels of depression according to the air to ground ordnance selected; bombs, rockets or guns. Due to game limitations, the Air to Air aiming mark is set up for lead computing of a target at 213meters (or 700 feet). We have included another gun sight option, whereby lead is calculated for targets all the way out to 4000ft. This has involved adding a ranging radar (which the NF-5A didn't have) but this solution allows lead computing for targets further out than 700 feet - something the RGS2 was capable of. The radar ranging option is the default but the user can copy the files from the "Standard" subfolder of the Avionics_Alt folder (located in the Aircraft folder) and switch out the ini files. If you're unhappy with either of the two options you can simply copy paste the files from the folder you prefer. ************************************************************* Agreement _________ THIS AIRCRAFT MOD OR ANY PART OF IT ARE TO BE EXCLUSIVELY HOSTED BY COMBATACE.COM AND MUST NOT BE HOSTED OR POSTED FOR DOWNLOAD ON ANY OTHER WEB SITE. THIS PACKAGE AND ANY PARTS HEREIN MAY NOT BE UPLOADED AS PART OF ANOTHER MOD NOR MUST THEY BE SOLD OR OFFERED FOR SALE EITHER IN PART OR AS A WHOLE WITHOUT MY EXPRESS PERMISSION. ************************************************************* Sophocles July 2021 -
1 point
Version 1.0.0
1,251 downloads
July 2020 =============== Hellenic Air Force F-5A Freedom Fighter Volume I VERSION 1.0 ------------------------------------------------------------ F-5A variants included in the Package: HAF F-5A standard version (1965 - 1974) HAF F-5A with Martin Baker IRQ-7a ejection seat (1975 - 1999) HAF Rf-5A reconnaissance variant with 4 K-92a cameras We are proud to present the F-5A HAF Volume I, the first of many to come, focusing on one of the most enduring American military aircraft designs ever produced during the Cold War period. This first Volume depicts the following Hellenic Air Force variants; the HAF F-5A standard, the HAF F-5A with the Martin Baker IRQ-7a ejection seat, and the HAF RF-5A reconnaissance variant. It has been our goal to provide to the simmer a highly detailed model and texture base which preserve the beautiful lines of this aircraft; and to engineer flight files and a cockpit/gauge file-set that are authentic and add to the immersion of the flying experience within the Strike Fighters 2 series. INSTALLATION INSTRUCTIONS: -------------------------- 1. Copy the contents of the "To Mods Folder(S)" to your SF2 Mod directory. Allow directory merging and overwrites, provided the overwrites pertain to "fake pilot" entries, as well as weapons made by ravenclaw_007, which are included in this and many other releases. 2. Add the entries of "ADD_TO_SOUNDLIST.txt" to your SOUNDLIST.INI (located in the "user\Saved Games\ThirdWire\StrikeFighters2\Flight" folder).If one does not exist, then you will need to extract it using the 3rdWire CAT extract utility. You are simply required to substitute the "XXX"s with the next sequential number in the sound file section of the file. NOTE 1: ------------ Both Regular and Higher resolution cockpit textures are included in their own distinct folders in the package. The user may alternate between the two by "commenting out" the relevant line in the F-5A_STANDARD_COCKPIT.ini [CockpitData] //Directory=cockpit Directory=cockpit_Lo-Fi <---This is the default In order to "activate" the higher resolution textures you would decomment the previous line and comment out the next line, thus: [CockpitData] Directory=cockpit <---This is now Hi-Res //Directory=cockpit_Lo-Fi NOTE 2: ------------ Another frame-rate friendly option for those with older hardware is to use the Next level of Detail Model as the primary external model. This simply involves changing the first line in the F-5A_HAF.ini from this.. [LOD001] Filename=F-5A_STANDARD.LOD to this.. [LOD001] Filename=F-5A_STANDARD_002.LOD Much effort was made to provide those with lower end systems an alternative lower poly-model to be able to enjoy the F-5a, so please take advantage of this _002.LOD model should you experience frame-rate issues. While not as "rounded" as the Higher poly version, it is nonetheless just as detailed and extensive. NOTE 3: ------------ For those who may find loading times excessive, the .jpg files in the texture folders can be reduced to 50% of their size without sacrificing too much surface detail. Keys: ------- SHIFT+0 -> canopy open CREDITS: sophocles - 3D Model, Cockpit, textures ravenclaw_007 - 3D Modeling, Animations, Weapons,textures baffmeister - Flight model, testing crusader - Avionics and data tweaks, Beta testing Guuruu - Sounds and Afterburner effects, Beta testing Guest contributors: Alfa2 - Loadouts and a wealth of info on the HAF variants. gkabs - pilot figure Special Thanks to the staff and members of Combatace.com whose passion and efforts have enabled this game to endure, and to provide so much fun and excitement! Additionally, many thanks to the following Combat-Ace Modders, who either actively contributed to the project over the years, or who invested their time either providing much needed hints and help, or researching various aspects of the model. Brain-32 - Modeling advice, initial cockpit.cfg + more NeverEnough - Initial work on the Flight model Russouk2004 - Always answering questions when I needed help..Cheers!! Dag - RoNAF textures and research (to be included in a dedicated future RoNAF F-5a module) Derk - Many, many references!!! Blade - Excellent mini-tutorial on damage textures Finally, thanks to TK and Thirdwire for creating such a fantastic game. **************************************************************** FEATURES: * Three model set including the HAF F-5A standard version (1965 - 1974), the HAF F-5A with Martin Baker IRQ-7a ejection seat (1975 - 1999), and the HAF RF-5A reconnaissance variant with 4 K-92a cameras; each with their own custom loadouts. * Three, highly detailed external 3d models, including the RF-5A, whose nose was graciously modeled by ravenclaw_007. * Specular color and Normal (bump) maps on all models * Seven Level of Detail models (LODs) for each model, providing an almost seamless transition from distance to distance; and perhaps more importantly, ensuring that the frame-rate "impact" of the aircraft is as low as possible. * Two sets of highly detailed external Fuel Tanks by ravenclaw_007; both the Factory variety and the Sargent Fletcher variants. * Fine-tuned flight parameters in three distinct aircraft data configuration files for all 3-D models, emphasizing the F-5A's agile and highly maneuverable characteristics - courtesy of Baffmeister. * 8 high resolution texture sets; thoroughly researched historic depictions of the Aircraft fielded by many HAF Wings and Squadrons. * Quality sound-set included. Base sounds, by Guuruu, were sourced from existing recordings of various aircraft at air-shows and were modified to match the prominent characteristics of the F-5A General Electric turbojets, the "buzz" of the M39 Pontiac 20mm machinegun, and the flap/Air-brake, undercarriage deployment and retraction sequences of the Freedom Fighter. * Super detailed 'Virtual Cockpit' with animated throttle control, rudder pedals, control stick, landing gear lever, canopy, canopy lever, drag-chute lever, weapons selectors and weapon station arming flick switches. *Accurate and functional representation of the Norair F-5A gun sight, with animated Mils selector and accompanying animated combining glass. (Mechanics by Crusader) * A full complement of highly (or should I say "insanely" detailed HAF weapons carried by the HAF F-5A, all by ravenclaw_007. * Complex animation of canopy opening mechanism, and animated Turbine blades; both thanks to ravenclaw_007 * GKAB's superb highly detailed crew figure with authentically modeled oxygen mask and flight helmet. * All new afterburner, emitter, and engine smoke effects by Guuruu. ****************************************************** PILOT NOTES ----------- F-5A Limit and Reference Speeds. [Indicated Airspeeds] FLAPS: 300kts for both leading and trailing edge. NOTE: The F-5A uses full flaps for take off but due to a game bug you must manually select full flaps for take off when player flown. The AI will use full flaps although you can hear the flap sound cycling between flap 1 and flap 2. LANDING GEAR: 240kts DRAG CHUTE: 165kts CANOPY: 50kts NOSE WHEEL STEERING: 65kts MAXIMUM INDICATED AIRSPEED: 710kts [redline] MAXIMUM MACH: 1.72 Mach design limit but thrust/drag limited to about mach 1.50 in a 60deg dive from 50,000ft. -------------------------------------------------------------------------------------------------------------------------------- TAKE OFF ROTATION SPEEDS 13500lbs: 155kts [full internal fuel and two sidewinders] 20500lbs: 195kts [about the maximum weight possible with included stores] NOTE: Use full flaps for take off! Adding 6kts for every 1000lbs above 13500lbs should give good aft stick/rotation speeds. -------------------------------------------------------------------------------------------------------------------------------- CLIMB SPEEDS Military Power 13500lbs: 375kts with a transition to mach 0.89 20500lbs: 310kts with a transition to mach 0.74 Maximum Power 13500lbs: 595kts with a transition to mach 0.93 20500lbs: 480kts with a transition to mach 0.85 ------------------------------------------------------------------------------------------------------------------------------- FINAL APPROACH SPEEDS With 500lbs fuel remaining and some empty racks use 160kts. Add 5kts for every additional 500lbs of fuel. NOTE: Target touch down speed is 20kts less than final approach speed. ------------------------------------------------------------------------------------------------------------------------------- ************************************************************* THIS AIRCRAFT MOD OR ANY PART OF IT ARE TO BE EXCLUSIVELY HOSTED BY COMBATACE.COM AND MUST NOT BE HOSTED OR POSTED FOR DOWNLOAD ON ANY OTHER WEB SITE. THIS PACKAGE AND ANY PARTS HEREIN MAY NOT BE UPLOADED AS PART OF ANOTHER MOD NOR MUST THEY BE SOLD OR OFFERED FOR SALE EITHER IN PART OR AS A WHOLE WITHOUT MY EXPRESS PERMISSION. ************************************************************* Sophocles July 2020 -
1 point
Version
1,105 downloads
Mitsubishi F-2A Viper Zero as flown by the JASDF. All installation notes and additional information are in the readme.txt so head there for all the answers. Credits as follows: Aircraft 3d model, canopy frame, .ini work and packaging - Me Additional .ini work and alternate loading and hangar screens - ace888 Aircraft skin/template and _DATA.ini tweaks - ace888 Afterburner effect - spillone104 (with some modifications by ace888) Vapour effects - ravenclaw (with some modifications by ace888) Decals - Nengajyou (with some modifications by me) Cockpit and ACESII Ejection seat - ravenclaw (with some modifications by me) Weapons - WhiteBoySamurai (with some modifications by me) FM - Thirdwire (with some modifications by me) Pilot 3d model - Old Diego Pilot skin - Originally by Old Diego modified by ace888 Dels -
1 point
Version 2.0
646 downloads
SF-5A de las FFAA Españolas Basado en el NF-5A, disponible aqui: http://combatace.com/files/file/9484-nf-5a-for-sf2-ver102/ 3 Esquemas de color: "Metal", "Lagarto" y "Gris" con numerales históricos del escuadrón 211, 212 y 464 (Metal y Lagarto) y ALA 23 (Gris) 2 Armas incluidas BR-250 y BR-500 Skin del Piloto creado por Diego Lozano y modificado por mi. Breve historia, Archivos modificados, instrucciones de instalación, reconocimientos y créditos en el LEEME ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SF-5A of Spanish Armed Forces Based on NF-5A, available here: http://combatace.com/files/file/9484-nf-5a-for-sf2-ver102/ 3 colour schemes: "Metal", "Lizard" and "Gray", with historic numerals from 211,212 y 464 Sqn (Metal & Lizard) and ALA 23 (Gray) 2 Weapons included, BR-250 & BR-500 Pilot Skin created by Diego Lozano, modified by me. A little bit of history, modified files, Instalation and acknowledgments and credits on README ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ ¡¡¡Espero que lo disfruteis!!! --------- I hope that you enjoy it!! Thanks to ravenclaw_007 for the plane & Diego Lozano for the Pilot!!!! ---LANAPA---
Important Information
By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..