Strike Fighters by Thirdwire

Repaint of the South East Asia Vietnam skin for Ajunaidr's F-104D Starfighter. (512x512)
 
 
Press the button below to download this skin and save it to your Desktop.
 
 
Only tested in WoV and SFG but should also work in WoE
 
 
Many thanks to Ajunaidr for the fantastic modelling skills!
 
regards
MigBuster30 - 18th August 2006

Repaint of the South East Asia Vietnam skin for Ajunaidr's F-104C Starfighter.(1024x1024)
 
 
Press the button below to download this skin and save it to your Desktop.
 
 
Only tested in WoV and SFG but should also work in WoE
 
 
 
regards
MigBuster30 - 18th August 2006

This skin is intended for use with the MDD F/A-18A add-on from the Mirage Factory and Flying Toaster.
It is a scheme worn by one of the Hornets of VMFA-312 "Checkerboards". This scheme was the creation of Sgt. David A. Sorenson of VMFA-312 and appears to get its inspiration from the earlier splinter schemes created by aviation artist Keith Ferris.
 
 
Skin is based on the originals by Column 5 and USAFMTL.
Updated parts include:
Additional/corrected panel lines
Corrected wheels
New landing gear doors and bays
Detailed missle stations and weapon pylons
Various new parts like cockpit and engine textures.
 
Just drop the VMFA312SPL folder into your FA-18A folder and go flying!
 
Jarink

Modern Hud and avionics for the F-16A in addition to other improvements
 
Thanks to Team viper for the original aircraft and Mirage Factory for the Hud Tga's and more

This skin is intended for use with the MDD F/A-18A add-on from the Mirage Factory and Flying Toaster.
It is a scheme worn by a couple of F/A-18As from VMFA-115 "Silver eagels". the scheme has changes a few times over the past couple of years (the a/c number changed from 200 to 201 when the squadron rotated to land-based); this is a representation of a later version which includes the wing stripes. The name on the speed brake is Capt “Puj” Hooks. It is in memory of former pilot Capt. Franklin Hooks II, assigned to the “Silver Eagles”, who died in 2004.
 
 
Skin is based on the originals by Column 5 and USAFMTL.
Updated parts include:
Additional/corrected panel lines
Corrected wheels
New landing gear doors and bays
Detailed missle stations and weapon pylons
Various new parts like cockpit and engine textures.
 
Just drop the VMFA115HV folder into your FA-18A folder and go flying!
 
Jarink

This set of templates is for the excellent MDD F/A-18A Hornet add-on aircraft by The Mirage Factory and Flying Toaster. It was made using the original textures by Column5 as a guide. While I replaced most of the skins, there are some parts taken directly from the originals, such as the landing gear legs, slimers and a couple of other mechanical bits.
 
Updated or enhanced:
New wheels (from photos)
New Landing gear and airbrake wells/doors
New exhausts (afterburner from photo)
New cockpit/instruments (from photos)
Many corrected or added panel lines and rivets
 
Feel free to make as many skins as you'd like with these templates, but please leave the credits layer intact.
 
This template pack may not be used in payware without express permission from myself and Column5.
 
Jarink

A campaign that uses the Germany CE map and uses the modern aircraft, carriers, and ground army available for Wings over Europe.
 
Beta 2 adds aircraft carriers, some new aircraft, some updated loadouts, Guided NUKE's and lots of fun. Please use README for intructions.
 
Any questions, or suggestions? You can find me at the only active thread for Final Dawn.
http://www.simhq.com/cgi-bin/ultimatebb.cg...45&t=004476
 
ShadowRain

This skin is intended for use with the MDD F/A-18A add-on from the Mirage Factory and Flying Toaster.
It is a representation of an F/A-18A from VFA-204 "River Rattlers". I was inspired to make this skin by seeing one of the planes at an airshow. The pilot names are all actual pilots' names (former squadron commanders), though the callsigns are fictional.
 
Skin is based on the originals by Column 5 and USAFMTL.
Updated parts include:
Additional/corrected panel lines
Corrected wheels
New landing gear doors and bays
Detailed missle stations and weapon pylons
Various new parts like cockpit and engine textures.
 
Just drop the VFA204 folder into your FA-18A folder and go flying!
 
Jarink

F-86K (Early Model) Sabre by Bunyap, Fubar512.
Skins by USAFMTL and Sundowner.
Original 3D model by Zur.
 
This is the early F-86K (pre ser number 56-4116) with the narrow chord wing. Later Ks had the extended F-40 wing and earlier ones were retrofitted. I'll have those when the L is done...
 
Put the plane in your aircraft folder. The skins are semi accurate based on the vague info I have on the K models of W Germany and Italy. Sleepy Sweeper is going to hook up the Norwegian Kilos. ( I think)
 
Make sure you have the latest wep pack to get the F-86 drop tanks.
 
Also in an update to the F-86D-45 which fixes the lights postions. Put that file in your main F-86D-45 folder and overwrite.
 
 
USAFMTL and the Dog Sabre Team.
www.combatace.com

F-86 Kilo and Lima Sabres by Bunyap, Fubar512.
Skins by USAFMTL and Sundowner.
Original 3D model by Zur
 
F-86K Late
The NA-242 batch differed from the previous batches by having the extended wing leading edges and wingtips of the F-86F-40-NA, increasing wingspan from 37.1 to 39.1 feet and wing area from 287.9 to 313.37 square feet. Many previous Fiat-assembled F-86Ks were modified in the field to bring them up to the NA-242 standard.
 
F-86L
F-86L was fitted with the F-86F-40 wing, with twelve-inch wingtip extensions and "6-3" leading edge extensions with slats. The wingspan and wing area were 39.1 feet and 313.37 square feet respectively. The new wing improved the handing ability and provided better turning at high altitudes. The reconditioned F-86Ls retained the armament of twenty-four rockets of the F-86D.
 
USAFMTL and the Dog Sabre Team.
www.combatace.com

PAF F-86F-35-NA Readme v0.5
===========================
 
A. installation ;
1. Simply drop the "PAF F-86F35" into either your Strike Fighters or your Wings Over Vietnam
Objects/Aircraft folder.
2. You should already be patched to SFP1 SP3.1, or WOV Patch 2 standard.
3. You should also have the latest Weapons Pack installed ( availible at http://www.combatace.com/ ).
 
B. Notes :
1. The PAF F-86F-35s were surplus USAF fighters designed to employ the Mk.12A Nuclear bomb using the
LABS method. When the F-35s were sold to both Pakistan & Portugal, the LABS timers were removed. PAF
F-86F-35s however retained the sight ( similar to the also LABS equipped A-4s ). Indeed PAF Sabre
pilots refered to the gunsights as "A-4 sights".
2. While the F-86F-35 was able to carry 8 HVAR underwing rockets in US service, the PAF apparently pre-
fered to use rocket pods instead. Later PAF Canadair Sabre 6s also carried rocket pods in lieu of HVARs.
 
C. Credits :
 
1. Hangarscreen by "The Wrench".
2. Paki Skin by USAFMTL ( Note this was the first ever Pakistan skin for Strike Fighters ).
Originally done for the F-86F-40.
3. M.M. Alam skin by Ajunaidr. M.M. Alam was the ranking Pakistani Ace of the 1965 Indo-Pak War.
4. PAF 17 Sqdn skin by Ghostrider883, based on a drawing by Bill Gunston. Note that 17 Sqdn operated both
F-86F-35 and the Canadair Sabre 6 during their "Sabre Years".
5. And most importantly, special thanks to the mighty "Zur" for allowing me to tinker with his F-86F model.
 
As usual, these guys did all the hard work, any mistakes are mine.
 
Enjoy!
 
Bob "howling1" Hauser
 
***Note To Manetsim Of Check-Six : Screenshot JPEG included ***

Canberra B (1) 58

CAnberra B2 Old model updated, and low level loads added

B-57A Canberra of the USAFE. Special thanks to Ajunaidr Canberra team for creating this beauty. Hope you guys enjoy.

F-16A USN Aggressors

A-4 ATSI Aggressor

F-16N Aggressor

Modification of AD Skyraider to "What If..." Royal Navy service. Contains all files needed; 2 new skins - all new decals, NEW Hangar Screen - only available HERE!.
Full instructions and 'historical' notes in read me!

KA-6D by the Intruders!
 
On Drums............C5 (FM)
On Bass..........Paul N. (Skins)
On Lead Guitar.......Monty CZ (org. Model)
On Vocals........wpnssgt (reworked Model)
Speaker carrier/Groupie.........USAFMTL (tester)

Original Sabre by Zur, re-decaled and ini tweeks by me. Changes Canadair Sabre into RAF version, with RAF style loadouts
All needed files are in the zip; plus a README!

Well,here is one for Saganuay

These update the decal ini's of my F86A, E, and F1. My apologies to all who downloaded for the screw up.

B-57B is made in order to introduce B-57B (PAF) with long nose and B-57G

Pakistan air Force B-57B with different nose

The B-57G model