Strike Fighters 1 Series by Thirdwire

VF-211 'Fighting Checkmates' (1972) skin for the Mirage Factory F-8J
 
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
 
Installation instructions
 
Extract the contents of the rar file named 'CM_72' into a TEMP folder.
Read the text file for further instructions.
 
Legal stuff
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.

13 & 14 sqn RAF Tornado GR1A skins in the current lo-viz strike grey scheme.
 
 
Only for the superb TornadoPackage by AD, Sundowner, Florian, Bunyap & Dave.
 
This should work ok in WOE\WOV\WOI\SFG or wherever you have the above aircraft installed.
 
The skins are a rework of an original hi-res by Sundowner with some weathering and tweaking from myself so all credit really goes to Sundowner for the base skins.
 
Hope you like 'em !
 
NFG.
 
 
Released under CombatAce Fair-Use terms. Visit the URL below for more info.
 
http://forum.combatace.com/index.php?showtopic=26131

VICTORY IS AT HAND!!
 
This is a reworked VFA-103 Jolly Rogers skin set. This skin is a merging enhancement, and expansion of the VFA-103 skin using SidDoggs cleaner skins combined with the original Super Hornet release skin (some decals retained) and with new decals by me.
 
I'd like to thank the following
 
-TK and Third Wire for creating a wonderfully open sim.
-The CombatAce Staff for being the anchor for this community
-InSky for their F/A-18F model, skins and decals
-Siddogg for letting me use his 'cleaner' skins as a basis for my work
 
* VFA-103 The Jolly Rogers: Into the future with Super Bugs
 
In December 2004 Carrier Air Wing 17 finished it's deployment with USS John F Kennedy and the F-14B Tomcats of VF-103 were sent to the bone yard at Davis Monthon AFB. This was a sad time for anyone who has a heart for the Tomcat. However, as has happened many times before in Naval Aviation history, including Jolly Roger history (F4U Corsair, F6F Hellcat, F-9F Panther, F-8 Crusader, and F-4 Phantom to name a few) reality weighs anchor and moves on.
 
VF-103 was redesignated VFA-103 and began training for and recieving the F/A-18F Super Hornet. In 2005 VFA-103 left Carrier Air Wing 17 (AA) and joined VFA-143 (Pukin) Dogs F/A-18E AG 1xx, VFA-83 Rampagers F/A-18C AG 3xx, and VFA-131 Wildcats F/A-18C AG 4xx in Carrier Air Wing 7. VFA-103 took on the AG code and returned to the 2xx modex numbers. In October 2005 CVW-7 began workups for deployment, and in October 2006 headed for the CENTCOM AOR aboard USS Dwight D Eisenhower. for an 8 month deployment. VFA-103 and CVW-7 had a very sucessful deployment.
 
 
* Included are the Carrier Air Wing 17 (AA tailcode) hi-viz and Lo-Viz colors,as well as the Carrier Air Wing 7 (AG tailcode) hi-viz and lo-viz colors.
 
*** YOU WILL NEED ( READ REQUIRED )
-Insky's F/A-18F model (These ONLY work with this model)
here --> http://forum.combatace.com/index.php?autoc...p;showfile=7043
 
-My modex numbers installed in your games Objects/Decals folder
here --> http://forum.combatace.com/index.php?autoc...p;showfile=3922
 
**AT THE VERY LEAST install (if you havn't already) the numbers set 'USN-NUM_ONE'(for AA tailcode) and 'USN-NUM_TWO' (for AG tailcode) from my modex pack OR YOU WILL NOT have numbers at all on the 'AA' jets or the hi-viz 'AG' jets, and only the tail numbers will show on the lo-viz 'AG' jets.
 
 
 
THIS RAR is created and released under CombatAce Fair-Use terms. Visit the URL below for more info.
 
http://forum.combatace.com/index.php?showtopic=26131

Hi aviator!
 
Here I have skins of an oldie; the L-29 Delfin.
There are two:
-silver DDR skin with numbers 311, 315, 360 and 374.
-camo DDR with numbers 338 and 311 (338 was the ONLY
Delfin to operate in camo colours, the 311 was painted after being
put up as a gateguard at Bautzen AFB and is now in the Berlin
Air Force museum.)
 
Thanks to Column5 where I was able to download the L-29,
special thanks for Monty_CZ for plane and skins.
 
 
 
Muesli

A special Target Area for Strike Fighters 1 : this is multiple buildings, a manufacturing complex.All buildings are destroyable and targetable ( in strike missions with SF1 ). Most of these have unique destroyed models.
 
Instalation : unzip and copy/paste all files into Terrain/TerrainName directory, and add lines to TargetList.ini and Typelist.ini files. Place this area wherewer you want on your map.
 
Inside of ZIP pack there are two TXT files included what to copy into a INi files of terrain !!!
 
Report me errors and missing textures !!!

Hi fellow aviator!
 
Another Hunter skin, exotic one from a "late" user.
 
Switzerland used the Hunters in this livery, these planes representing
a batch of 8 from the 20 Staffel. these all were from the first 100 delivered, being Mk.58s. Later
ones were Mk.58As and were numbered in the 41xx series.
 
 
Thanks to Sundowner, Gramps, Diego, Marcelo and David for their original work on
plane and skins!
 
NOTE: ONLY for Armourdave's Hunter F.6 !!!!!!!!!!!!
 
 
 
 
 
Muesli

VF-51 'Screaming Eagles' (1970) skin for the Mirage Factory F-8J
-------------------------------------------------------------------------
 
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
 
Installation instructions
--------------------------
 
Extract the contents of the rar file named 'SE70' into a TEMP folder.
Read the text file for further instructions.
 
Legal stuff
------------
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.

Original skin by Column5
 
For use on the Mirage Factory A-7E_MF

Kawanishi N1K1 Kyofu "Rex"
 
Full Aircraft Replacement Pak
 
This is Pasko's N1K1 Rex, the complete package. As the link is broked at his site, and it's dosn't seem availalbe to the General Masses ™, I've chosen to upload the entire aircraft, WITH my Update Pak already installed.
Please consider this as a REPLACEMENT and enchacement of the Pak I uploaded yesturday.
 
As stated, this IS the complete aircraft, lods, skins, inis, and cockpit (which comes from AD's Zero). This will simplify matters releated to installing it.
 
-= NOTE: You MUST have the Bunyap Weapons Pak of 6/06 to get the WW2 weapons and guns and such =-
 
- This mod has been tested in SF, WoV and WoE. This mod is NOT reccomended for use in a WW2 style install of WoI, as it handles prop flight models in "an odd way".
 
As usual, read the enclosed 'readme' for (for once!!!) simple install instructions!! BTW, as this is the complete aircraft, there are 2 readmes -- Pasko's original and the one for my update pak, but you can disregard it
 
With deep thanks to Pasko for creating this aircraft for us, and all those that worked on it!
 
Enjoy!
Wrench
kevin stein

A Hunter skin, exotic one from a "late" user.
 
Somalia used the Hunters in this livery in the mid and late eighties for in the CAS and strike role before
dumping them and replacing them with MiG-21s. The five in this package were (representing F.76s)
bought from Abu Dhabi in 1982 together with two T.77s and one FR.75A.
 
 
Thanks to Sundowner, Gramps, Diego, Marcelo and David for their original work on
plane and skins!
 
NOTE: ONLY for Armourdave's Hunter F.6 !!!!!!!!!!!!
 
Muesli

VFP-63 "Fightertown" skin for the Mirage Factory F-8J
-------------------------------------------------------------
 
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
 
Installation instructions
--------------------------
 
Extract the contents of the rar file named 'FT_2' into a TEMP folder.
Read the text file for further instructions.
 
Legal stuff
------------
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
 
 
Gocad

VFP-63 low-viz skin for the Mirage Factory F-8J
------------------------------------------------------------
 
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
 
Installation instructions
--------------------------
 
Extract the contents of the rar file named '63LV_2B' into a TEMP folder.
Read the text file for further instructions.
 
Legal stuff
------------
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.

The newest and most technologically advanced fighter aeroplane in the world today, is the "Glorious Tiger Lion Monty Python Camel Terminator Eagle Of Kazakhstan That Crushes Weak Armies Such Uzbekistan Like Moth", or the easy to pronounce "GTLMPCTEOKTCWASULM" for short, or "Tiger Moth" for even shorter.
 
This is a repaint of Wrench's Nigerian AF Tiger Moth, re-decaled to look like a Kazakhstan Air Force tiger moth.
 
Credit also to RussoUK, for the excellent little bird.
 
I have been told that repaints are fair game, just give credit. This I have done, and if anyone takes offense, I will remove it.

Darwin (WW2) Terrain Upgrade: For WW2 PTO mods SF/WoV/WoE -ONLY-
 
This mod is a relatively simple upgrade to Edward's WW2 Darwin terrain. What I've done is added LOTS of new targets to the existing target areas, and replaced at least one airfield, on each side, with a repainted "desert airfiled 1", which is now a medium dirt runway. The 'new' target areas are enhancements of already existing ones -- I've just added some more things here and there to make it look a little more populated. There are a couple of new parked planes, based of existing ones, hex-edited and reskinned for their proper users.
 
This is a fairly 'target rich' environment -- there are plenty of items for strike and anti-shipping missions. It is also fairly well defended - so watch out for the flak.
 
It has been tested in SF, WoV and WoE, using their cats pointed to in the main ini. As the new objects will be residing directly in the terrain folder, you should have no problems. (see the CombatAce Knowledge Base for the tutorial on using the cat pointer line, or down below for full instructions)
 
New planning maps (all 3) have been created; only the #3 map has the cities listed on it, to keep #1 & 2 fairly 'clean'.
 
You MUST have ALL the Pacific Objects (ground units, ships, AAA, infantry, etc) already installed in you PTO version of the game; otherwise things won't be appearing. This is especially important for the ships -- make sure you have the barges (get both, they're needed in the GO folder), the Liberty ship, and all warships, both Allied and Japanese. Don't forget to check Geo's page for more WW2 goodies ... there's a lot of stuff that's usable (and used!) here as well. Hinchbrooke has some very nice Royal Navy battleships. <wink> However, you DO get a new PT Boat. The lods and skin bmps come from Edwards Solomons Terrain; I just built an half-assed data ini for it to add one more little ship.
 
It is also reccomended that you have installed CA_Stary's WW2 hangars and buildings. They have a nice worn green wood-ish texture, and look really good in the PTO theatre! I have, also, included the original data ini with it's terrain and water effects activeated (Vista user take note!! -more for you below).
 
I HAVE tested the map with both Brain32's tiles, and CA_Stary's "Green Hell'' mods; it is NOT set up for their use, and if you choose to install either of them, you do so at your own risk (not that anything bad would really happen...). See "Notes and Comments below for more". While they do greatly enhance the visual eye candy, there are several issues due to target placements.
 
As stated above, the data ini has been upgraded to the latest standards. Water effects are active, so Vista users beware...more information for you is below in the Install Instructions. See "Notes for Vista Users".
 
= MAKE SURE YOU HAVE THE LATEST, WW2 NATIONS INI IN YOUR FLIGHT FOLDER =
= MAKE SURE YOU HAVE THE LATEST WW2 FORMATIONS INI IN YOUR FLIGHT FOLDER =
== MAKE SURE YOU HAVE THE LATEST WEAPONS PAK FOR THE WW2 WEAPONS!! ==
 
Follow these instructions herein =EXACTLY= and you should have no problems. In essence, READ the readme!!!
 
Good Hunting!
Wrench
Kevin Stein
 
yeah, I know it's the same picture as the Original Map upload...you all know me, too lazy to take another screenie! :yes:

Hello fellow aviators!
 
First customised skin for the ROCAF Mirage 2000-5!
With permission I used the skin included with the airplane
and I created a set of accurate serials. There are eight in total, ranging from EI04 (2004) to EI46 (2046).
To avoid a certain glitch in the tail I had to place the serial a bit more forward
than it uses to be but it is not disturbing. Also I have toned down the insignia
to a more appropriate low visibility format (as seen in photos).
 
Go fly!
 
 
 
Muesli
 
 
Thanks to IAFMars, YEYEYE and Erwin_Hans for the Mirage,
thanks to IAFMARS for the basic skin!

Chinese Taiwan Mirage2000-5 BETA
 
--------------------------------------------------------------------------
This is a beta of Chinese Taiwan Mirage2000-5.
 
RoCAF bought 60 Mirage2000-5 fighters in 1993.But RoCAF haven't got france Air-Ground weapons,and the france radar dosen't spport homing/guiding Air-ground weapon from US.So,though these version of Mirage2000-5 got a great Air-ground attack abilltye,you can not use any Air-Ground weapons.
 
--------------------------------------------------------------------------
3D Model by aleks
 
Flight Model by IAFmars and YEYEYE and Erwin_hans
 
Weapons by IAFmars and YEYEYE
 
Skins by IAFmars
 
This beta using JAS-39C's cockpit.Thanks Dave's cockpit.
--------------------------------------------------------------------------
Installation insctructions:
 
Install the CT Mirage2000-5 folder into your objects/aircraft folder.
 
Put the weapons folder in objects folder. If you have a weapons pack installed then that folder will already be there. In that case take the contents and put them in the weapons folder.
 
Add the weapons according the link below. Just using the weapondata editor.
--------------------------------------------------------------------------
If you have some problems or some advices,ples post in CA or E-mail me.
My E-mail:iafc@sohu.com
 
Sorry for the last mistake.
 
Have fun!

IX sqdn Tornado GR1A skin & decals.
 
Only for the superb TornadoPackage by AD, Sundowner, Florian, Bunyap & Dave.
 
This should work ok in WOE\WOV\WOI\SFG or wherever you have the above aircraft installed.
 
The skin is a rework of an original hi-res by Sundowner with some weathering and tweaking from myself so all credit really goes to Sundowner.
 
You may if you wish include these fuselage serials into any RAF Tornado skin and they will be correct.
 
NFG.
 
Released under CombatAce Fair-Use terms. Visit the URL below for more info.
 
http://forum.combatace.com/index.php?showtopic=26131

Hi!
 
Something quick; a skin of a MiG-29 Fulcrum-C
of the Democratic People's Republic of Korea (North Korea).
As far as I know they use the two digit red stencilled numbers on a basic camo
skin of which the darker grey is being replaced by a more darkish green/grey colour.
This is the result. Nice targets for your ROKAF aircraft!
 
 
Muesli
 
 
Thanks to BUFF for the original.

Hello aviator!
 
this is a Dutch paintjob for the mighty Hunter, as it
served in the 630 Squadron.
Aircraft N-216, 219, 222, 249, 252, 266, 274 and 289.
 
The N-1xx series was actually an F.4 series Hunter fitted with the dogtooth wing of the F.6.
The 2xx series were full F.6 models.
 
NOTE: ONLY for Armourdave's Hunter F.6 !!!!!!!!!!!!
 
Enjoy, have a safe flight!
 
 
 
 
Muesli
 
 
PS:
 
Many thanks to Armourdave for making the Hunter F.6 for SF.Thanks
 
also to Sundowner for making the skin for the Hunter.

Hello aviator!
 
this is a Dutch paintjob for the mighty Hunter, as it
served in Papua New Guinea. Hence the colourful tail!
Aircraft N-110, N-111 and N-112 are represented.
 
The N-1xx series was actually an F.4 series Hunter fitted with the dogtooth wing of the F.6.
The 2xx series were full F.6 models.
 
NOTE: ONLY for Armourdave's Hunter F.6 !!!!!!!!!!!!
 
Enjoy, have a safe flight!
 
 
 
 
Muesli
 
 
PS:
 
Many thanks to Armourdave for making the Hunter F.6 for SF.Thanks
 
also to Sundowner for making the skin for the Hunter.

This tiny mod adds heavy snowfall conditions when flying in inclement weather.
 
Fits best the snow covered terrains (MajorLee's DBS, ANW winter etc.)
 
Very hard to find your airfield flying in this weather!

NEW_SmallExplosion SOUND for WO* :yes:

This is a one-off skin.
Made it because a gate guarrd nearby inspired me,
an F-84F at Gilze-Rijen AB wearing P-191 reg.
 
The P-191, as made, was an F-84F-71-RE Thunderstreak
with serial 53-196916 which was taken in service in August 1957
and flew until October 1970. It first flew with 316 Sqn but
was handed to 311 Sqn late December 1957 because 316
was disbanded. With 311 it flew as PP-12 and later as P-191.
The skin in which P-191 is standing guard near the gate
often is incorrect. Over the years I saw different serials and
squadron markings. At one time it almost fell apart, but it
is now in a better condition.
 
So, here you have P-191. Nice livery, for which I thank
Column 5 because he made the basic camo skin.

F/A-18F Super Hornet VFA-22 "Fighting Redcocks" CAG scheme
 
By SidDogg
====================================================================
 
This is the VFA-22 CAG Bird livery for the excellent
F/A-18F Super Hornet by Erwin_Hans.
 
A BIG thanks to Erwin_Hans for this aircraft, as well as
the skin template used to make this skin.
 
Installation
--------------
 
Simply unzip into the F/A-18F aircraft directory
 
Enjoy!
 
 
 
---SidDogg

Shenyang F-8IIM FinBack-B Export-96
 
*******************************************************************************************************************
 
These from Wiki:
 
The effort to develop an all-weather interceptor began in full in 1964 and this was to result in the first Chinese fighter jet to be designed and built indigenously. The prototype took its maiden flight in 1969. Despite the early beginnings, due to political turmoils such as the Cultural Revolution, it was not produced until 1979 and entered service in 1980. Its basic configuration resembles an enlargement of the delta-wing MiG-21 'Fishbed' with two Liyang (LMC) Wopen-7A turbojet engines and a maximum speed of Mach 2.2. The twin engined J-8 competed with the single engine J-9 project and ultimately emerged as the victor largely due to the existing availability of the former's MiG-21 based powerplant and proven layout.
 
In order to house a large radar set, the design called for a solid nose and variable geometry side air intakes. However, the lack of familiarity with this type of intake meant the J-8 had to settle for a MiG-21 style nose intake. The solid nose J-8 was finally realized in the J-8II (Finback-B).
 
J-8II (Finback-B)
First flew on June 12, 1984. Improved J-8I prototype with redesigned nose/front section and fuselage. Replaced nose air inlet with solid nose and lateral air intakes, similar to those of the MiG-23 China indeed received several MiG-23s in the late 1970s from Egypt and the hinged ventral fin and lateral intakes shown reversed engineering of these MiG-23 features into the J-8II, in fact China followed a very similar development process to the Su-15 when from the Sukhoi T-5, the large T-58 (Su-15) was spawned, the MiG-23PD also has some similarities with the J-8II however the MiG-23PD is a single engined experimental fighter with direct lift engines, but the transformation of the MiG-21 into the MiG-23PD was mirrored in the J-8II. Equipped with Type 208 (SL-4A) monopulse radar (40 km range).
 
J-8IIM (F-8IIM)
Unveiled in Zhuhai Air Show 1996, export version of J-8B with Russian Phazotron Zhuk-8II PD radar (70 km range), R-27R1 (AA-10) AAM and Kh-31A (AS-17) anti-ship missile. Failed to attract any export customers and no domestic orders. [4] Conversion from older airframe was reportedly much fewer than the 100 units of Zhuk-8II radar delivered, and the conversion might have only been an experimental program.
 
*************************************************************************************************************************
 
But I don't agree with the view of coping Su-11/15.
 
*************************************************************************************************************************
 
F/A-18F Super Hornet
 
Skins by olo007 and 101tfs
 
3D Model by 101tfs
 
Flight Model by Erwin_hans
 
INI work by 101tfs and Erwin_hans
 
Effects by 101tfs and Erwin_hans
 
PLAAFpilot by olo007
 
Original MiG-21-93 Cockpit of some friend[i forgot who did it ,here thanks to him] modified to a F-8IIM cockpit by Erwin_hans.
 
 
***********************************************************************************************************************
Thanks:
 
 
 
For Cockpit:
 
Based at MiG-21-93 Cockpit
 
 
 
For avionics:
 
I used avionics from Marcfighter's Su-27SK
 
 
*******************************************************************************************************************
 
 
1, unzip the F-8IIM-Early.rar
 
2,Copy ALL files from F-8IIM folder to :
 
Strike Fighters\Objects\aircraft
 
3,then............enjoy it
 
 
 
******** EVERYONE CAN USE THESE MODELS for all Third Wire projects, as you want.************************
 
 
Erwin_Hans,olo007 and 101tfs
 
 
 
----------------Inksy Group 2008
 
 
 
 
 
*****************************************************************************************************************