SUBCATEGORIES
-
SF2 WW2 SDKFZ-251 Half-Track Mod
By Wrench
SF2 WW2 SDKFZ-251 Half-Track Mod
-- Something for the WW2 ETO/MTO/Eastern Front players --
= For SF2 ONLY, Full-5 Merged (Reccomended/Preferred) =
This pack contains a modification of Geo's German Army Sdkfz-251 "Hanomag" Half-Track. Even though the full vehicle is here (and an extra 'snow camo' skin, still zipped), it's mostly an ini tweek.
What I've done is change it's GroundObjectRole= from TANK to TRANSPORT. This will allow the Game Engine to use them in ARMED_RECON missions.
But beware...
It'll bite back!!!
As always, fairly easy to follow, detailed install instructions are included. Please READ them FIRST!!!
Good Hunting!!
wrench
kevin stein
157 downloads
-
GermanWW2Pilots.7z
By russouk2004
Added a few different aspects of my previous Gerpilot
this pack has
Gerpilot =goggles and mask on
Gerpilot2 =goggles up mask on
Gerpilot3 =goggles up no mask on
just put folders in your main mod folder,...objects\ pilot... folder and add to data.ini of thw WW2 a\c you want them in.
170 downloads
-
Lavochkin static prop fix
By Wilches
Dear simmers
This files are made to fix the Bunyap´s great Lavochkin La-9/11 wich´s lacking the static prop. To install place the DATA.INI files inside the respective plane. The SLOWPROP.TGA goes to every skin folder replacing the older one. Now the Lavs got props when parked and start engine! Hope you guys like it.
It´s a freeware, so you can use freely wich means that you don´t need to ask any kind of permission to post, change or anything else.
Claudio Wilches - August 2013
116 downloads
-
T-34-85-2.7z
By russouk2004
T34-85 Russian Tank
Model adapted from freeware model...not found creator name yet...
adapted and a lot of restoring the model to max format....and some minor new meshes and some mapping...
all inis are basically TW but adapted by me.
copied stock data etc but renamed to avoid conflict.......works ok in game...after having a few mesh probs...(high poly count) fixed.
I think its far better than stock...
feel free to alter ini`s as desired...
Usual CA Rulez apply...
have fun blowing it up....
Russouk
137 downloads
-
SF2_mesa Radar
By acesfakia
Hello
this is the 3d max and a Lod ..... file that i make......for the Multi-Role Electronically Scanned Array (MESA) Surveillance Radar
So if someone want to use it as a fake Pilot......is a Lod inside file.....with uv map...!!! Also a 3d's max file to save time. The cordinates...are not 100...%...
Need recalculate.....with the plane...737....for 100% size....!!!
A friend ask me.....about the file...so i give it to all....! This is more.....for beginners..in modelling....with 3d max..
Ace
------------------------------------------------------------------------------------------------------------
The MESA radar provides air-to-air coverage, air-to-surface coverage, integrated identification friend or foe, special track beams and focused sector operation.
MESA builds on the company's expertise acquired from the AWACS (Airborne Warning and Control System) to bring military airborne surveillance capabilities to mid-size Boeing 737 aircraft.
MESA enables sophisticated air-to-air and maritime coverage and integrated identification of friend-or-foe systems.
Advances in technology have caused a revolution in the capabilities and flexibility of airborne surveillance systems and sensors used in Airborne Early Warning & Control (AEW&C) systems. Developments in distributed transmitters, commercial off-the-shelf processing and high-performance antenna arrays have enabled ES multirole electronically scanned array (MESA) radar to be cost effectively applied to the next generation Boeing 737-700 series aircraft.
-------------------------------------------------------------------------------------------------------------------------------------------
source= http://www.northropgrumman.com/Capabilities/mesa/Pages/default.aspx
53 downloads
-
F-8 DATA & LOADOUT update
This is a total rework of loadout and data.ini of ALL F-8s.
These include all TMF, TW and YAP models. You will find them inside three separate folders.
I tried to be as realistic as possible regarding performance figures, empty weights etc. Please give me feedback about the results, what do you think about.
CREDITS:
- Column5
- Paulopanz
- ace888
- ChampionsVA56
- Wrench
- Diego
- Ravenclaw ? (the seats)
- TW
- ? (the sounds)
without you the update would not have been possible.
if some credits are wrong and/or missing, please send me a PM.
REQUESTS:
- More hi-rez skins for all three families, like these in the screenshots. As you can see, in both TW and TMF the hi-rez are a real improvement. Skins for the RF-8G, especially late low-viz, will be vert much appreciated.
- A proper cockpit as both TMF and TW look really dated now.
- Proper ejection seats (better than before, but still not 100% accurate)
Enjoy!!
Note: TW models include DLC also.
220 downloads
-
KAW/Post War B-29 & RAF Washington B.1 Data ini Fixit Pack
By Wrench
SF2 KAW & Post-War B-29 & Washington B.1 Adjustment Pak 8/31/2017
-- Something for the WW2 ETO players --
= For SF2 ONLY, Full-5 Merged (Reccomended/Preferred) =
This package contains a new, modified data in for the Post-War and KAW era B-29 Superfortress, and the RAF Washington B.1. Also included is a "backed up" copy of the original data ini, just for safety's sake.
For those with the skill to copy/paste, you can use this data ini for your WW2 PTO B-29 as well. You'll only need to copy/paste the TOP section of the original data ini from your WW2 B-29 into this new one.
If you have this aircraft already, THIS is the pack to use. Both of the full aircraft mods, available here in the CA Downloads, have already been updated for new users.
Reminder - if you have this aircraft already, you do =NOT= need to redownload the entire aircraft again.
= Instructions for Use:
unzip to a temp folder or your desktop.
Copy/paste the B-29_data.ini (and B-29_Data - copy.ini) You know, copy them BOTH into the KAW/Post-War B-29's folder.
Do the Same for the Washington B.1. Copy/paste BOTH supplied data inis into the WashingtonB1 folder.
Go fly.
Good Hunting!!
Kevin "Wrench" Stein
Updated 8/31/2017
Changes:
All hit boxes reset or newly created for those components without
Small adjustment to some FM parameters.
79 downloads
-
SA-7 Grail / 9K32 Strela-2 MANPADS Pack
By tiopilotos
SF2 SA-7 Grail / 9K32 Strela-2 MANPADS Pack 1.5
-----------------------------------------------------------------------------------------
This pack features the famous SA-7 "Grail". It is a man-portable, shoulder-fired, low-altitude,
infrared guided surface-to-air missile system (MANPADS). It is widely exported and has
been in use in nearly every regional conflict since 1969. Despite its operational limitations,
it has been proved quite effective in the hands of tactical armies and rebel groups.
During War of Attrition on 19 August 1969 Egyptian soldiers brought down an Israeli A-4H
Skyhawk some miles west of the Suez Canal using Strela-2. According to some sources
this might have been the first successful combat use of any MANPADS in history!
Following variants are included:
9K32 Strela-2 (SA-7A, 1968) - First variant.
9K32M Strela-2M (SA-7B, 1970) - Improved variant.
------------------------------------------------------------------------------------------
New features:
- Updated missiles data which offer more realistic performance
- Fuze distances have been increased since the SA-7 had lethality limitations after hitting
a target. Now a target can be hit but it may return back home safely
- New launch effect and sound
------------------------------------------------------------------------------------------
Known issues:
- Due to game engine limitations concering missile guidance, 9M32 (SA-7A) missile's target
aspect has been set as Rear 180 despite the fact that in reality it could be fired only at the rear.
After massive failed launches it became clear that it was extremely difficult to achieve a single
hit by setting 9M32 as Rear 60 even when some other values such as FOV and track rate had
been increased.
- Helicopters have higher survival rate per hit because in some cases missiles hit the tail rotor
without causing significant damage. I guess this is another game engine characteristic.
- Low altitude (lower than 600-800m) performance is downgraded for current missile values.
By increasing noise rejection the missile becomes capable of hitting targets in lower altitude
but at the same time the single shot hit/kill probability is being increased to an unrealistic level.
- Fuze distances are longer compared with the actual lethal and damage radius of the system.
In SF2 world the real high explosive warhead quantity is big enough to destroy a fighter size
target even in 10 meters!
-------------------------------------------------------------------------------------------
As always open readme.txt first to see installation instructions and credits.
Lot of research and hard work was made to make this SAM as realistic as possible.
More than 2000 launches took place!
Enjoy as much as you can this mod and leave comments with your in-game experience
in the support topic!
--------------------------------------------------------------------------------------------
License:
This is a freeware; yet it can be redistributed only in other CombatACE mod packages.
You are free to make further modifications for own use but if you plan to release a modified
version of this package you must request permission first. In that case you must include original
read me file. This mod may not in any way, shape or form be used in any payware additions.
352 downloads
-
SF2 Upgrade Pack For Western Transports, Airliners and AWACs by Veltro2K
By Wrench
SF2 Upgrade Pack For Western Transports, Airliners and AWACs by Veltro2K 6/1/2018
= For SF2, Any/All (Full 5 Merged RECCOMENDED!) =
This is a remod pack for Veltro2k's Western/NATO Transport, Airliner and AWAC aircraft. This package =ONLY= contains the data inis for the aircraft listed below. You will still need to locate the original aircraft.
It is highly suggested (read: REQUIRED) that you have SF2NA as part of your merged installs, as several of these reference the stock 3W Tu-95 Bear destroyed model. Some reference the stock 3W An-12, Tu-16 or B-52D (SF2V) destroyed models as well. Flight Models remain "as issued"; they've not been touched by me.
All New Data Inis Included in this pack are for:
C-5A Galaxy
C-17 Globemaster II
C-141A Starlifter
C-141B Starlifter
G-222/C-27 Spartan
E-767
KC-767 (KC-46)
Nimrod MR.1 (RAF ASW/Martime Patrol)
Br.1150 Atlantique (ASW/Martime Patrol)
PB-1W Navy Fortress (USN 1940s/50s AEW - B-17)
DC-8 *
B-747 Pan Am"Jumbo Jet"
*The DC-8 mods are for the package by Daddyairplanes*
All aircraft have had their data inis reworked to correct, add, move, remove or generally "fix" all the hit boxes, relocate components (ie: fuel tanks, as best as possible inside the airframe) and in general clean up many things that simply escaped notice. The exception here is the Pan Am 747, which gets a partly repainted skin, with all new 100% accurate civil registration number decals (18) AND their matching "Clipper" names. Decal Randomization is "TRUE". The 747 and DC-8s also get an avionics upgrade (GM radar). Some sounds are included; you may have them alread, or not; but I like "to be sure".
Please note, some of these aircraft may NOT be in the SF2 downloads section; one will need to Search the SF1/Wo* (1stGen) downloads. Equally important, is to HAVE the aircraft installed =BEFORE= installing this Upgrade Pack. Kinda makes sense, right? <gr>
As is always reccomended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions.
Happy Landings!
Wrench
Kevin Stein
EDIT: 6/4/18 -
added missing G-222 folder and inis
145 downloads
-
SF2 Harbor Crane
By krfrge
HarborCrane
-----------------------------------------------------------------------------------------------------
This is freeware from "www.Archive3D.net"
Category: "Port handling cranes" - Collection
Size: 1.82MB
Downloads: 2202
Added by: Filip
Resource: Free 3d models
Additional Info: Crane 3 - 3D model (*.gsm+*.3ds) for exterior 3d visualization.
Tags: Crane, harbor crane, lifting crane, port crane
. This 3D model is provided "as is", entirely at your own risk.
2. Archive3D.net doesn't accept any claims regarding quality of 3D model or any standards conformity.
3. Archive3D.net is not responsible for the further use of this 3D model and does not consider the usage claims due to lack of tools and authority to control, confirm or guarantee the accuracy of personal data and law information.
4. This model may be freely modificated or elaborated.
-----------------------------------------------------------------------------------------------------
This is a modification (painting) of this harbor crane.
I wish I were this capable at modeling but sadly I am not there yet.
Good eye-candy for the targeted port of your choice.
To add to your terrain of choice simply add the following entry into your terrain_TYPES.INI
[TargetTypexxx] <------- make sure to add your sequence number
Name=HarborCrane
FullName=Crane
ModelName=HarborCrane.LOD
TargetType=MISC
ActiveYear=0
TargetValue=0
UseGroundObject=FALSE
DamagePoint=10.0
ArmorValue=0.0
ArmorType=0
RepairRate=0.150
StartDetectChance=100
StartIdentifiedChance=20
IncreaseDetectChanceKey=0
MaxVisibleDist=4000.0
CollisionMesh=
DamagedModel=
DestroyedEffect=LargeTallStructureCollapseEmitter
DestroyedModel=
SecondaryChance=100
SecondaryEffect=MediumExplosionEffect
Kindest regards - Krfrge
September 2018.
84 downloads
-
Civilian Airline Pilots 2018
By Viper63a
Civilian Airline Pilots 2018
By Viper63a
This mod includes civilian airline pilots. Not sure where the base pilot I modded came from, I think I got the pilot from a different mod. If anyone knows, please drop me a line so I can properly credit the creator of the LOD file.
To use the pilots, please add them to your "Pilots" folder and update your "<plane>DATA.INI" file's "Crew" section to display them in your planes.
Enjoy!
=Viper=
74 downloads
-
5 New City buildings
By GKABS
Hello and thank you for downloading my work.
What's included:
all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy all the files to Terrains folder and the falowing to _TYPES.ini file
[TargetTypeXXX]
Name=City BuildingGK1
FullName=City BuildingGK1
ModelName=GK-Building1.LOD
TargetType=CITY_BUILDING
ActiveYear=0
TargetValue=600
UseGroundObject=FALSE
DamagePoint=100.0
ArmorValue=30000.0
ArmorType=1
RepairRate=0.150
StartDetectChance=20
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=12000.0
DamagedModel=
DestroyedEffect=LargeTallStructureCollapse
DestroyedModel=
SecondaryEffect=MediumExplosionEffect
SecondaryChance=100
[TargetTypeXXX]
Name=City Building GK2
FullName=City Building GK2
ModelName=GK-Building2.LOD
TargetType=CITY_BUILDING
ActiveYear=0
TargetValue=600
UseGroundObject=FALSE
DamagePoint=100.0
ArmorValue=30000.0
ArmorType=1
RepairRate=0.150
StartDetectChance=20
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=12000.0
DamagedModel=
DestroyedEffect=LargeTallStructureCollapse
DestroyedModel=
SecondaryEffect=MediumExplosionEffect
SecondaryChance=100
[TargetTypeXXX]
Name=City Building GK3
FullName=City Building GK3
ModelName=GK-Building3.LOD
TargetType=CITY_BUILDING
ActiveYear=0
TargetValue=600
UseGroundObject=FALSE
DamagePoint=100.0
ArmorValue=30000.0
ArmorType=1
RepairRate=0.150
StartDetectChance=20
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=12000.0
DamagedModel=
DestroyedEffect=LargeTallStructureCollapse
DestroyedModel=
SecondaryEffect=MediumExplosionEffect
SecondaryChance=100
[TargetTypeXXX]
Name=City Building GK4
FullName=City Building GK4
ModelName=GK-Building4.LOD
TargetType=CITY_BUILDING
ActiveYear=0
TargetValue=600
UseGroundObject=FALSE
DamagePoint=100.0
ArmorValue=30000.0
ArmorType=1
RepairRate=0.150
StartDetectChance=20
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=12000.0
DamagedModel=
DestroyedEffect=LargeTallStructureCollapse
DestroyedModel=
SecondaryEffect=MediumExplosionEffect
SecondaryChance=100
[TargetTypeXXX]
Name=City Building GK5
FullName=City Building GK5
ModelName=GK-Building5.LOD
TargetType=CITY_BUILDING
ActiveYear=0
TargetValue=600
UseGroundObject=FALSE
DamagePoint=100.0
ArmorValue=30000.0
ArmorType=1
RepairRate=0.150
StartDetectChance=20
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=12000.0
DamagedModel=
DestroyedEffect=LargeTallStructureCollapse
DestroyedModel=
SecondaryEffect=MediumExplosionEffect
SecondaryChance=100
If you need any further help please read the knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and the skins
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
And finally not to forget the wonderful site of https://combatace.com and all the nice member's and their dedicated support for this game.
If you need any assistance please contact me at
gkabs@gkabs.net
https://gkabs.net
128 downloads
-
PT-76
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
there are 2 models for the GK-PT-76
all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the folder to Objects/GroundObject and the falowing to _TYPES.ini file
[TargetTypeXXX]
Name=GK-PT-76
FullName=GK-PT-76
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-PT-76
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=GK-MT-LB-Destroued.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
[TargetTypeXXX]
Name=GK-PT-76-Folded
FullName=GK-PT-76-Folded
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-PT-76
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=GK-MT-LB-Destroued.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
If you need to change the skin please just rename the one you want to use to GK-PT-76-6.jpg
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and skins
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
If you need any assistance please contact me at
gkabs@gkabs.net
152 downloads
-
SF2 F-84F TMF Internal Tanks Fix
By Cliff7600
This object mod applies to this download :
The data.ini file of this mod is the exact same file from the SF2 F-84F TMF with two modifications :
- the guns position and MinMaxExtent values had been edited
- the internal fuel tanks have been modified to be closer to the real aircraft
Read the ReadMe-s
I really struggled not to untitle this download "SF2 F-84F TMF Ineternal Tanks Fix"
xD
69 downloads
-
BTR-70 APC
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
BTR-70 model with 5 skins. and 4 models from high to low poly.
All my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the folder to Objects/GroundObject and the falowing to _TYPES.ini file
[TargetTypeXXX] <-------- Change to the next number at the bottom of you types listing
Name=BTR-70
FullName=BTR-70 APC
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-BTR-70
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=GK-BTR-70-Destroyed.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and skins
Strahi for testing and making the data file big help many thanks, bro.
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice member's and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
140 downloads
-
SA-14 Gremlin / 9K34 Strela-3 MANPADS Pack
By tiopilotos
SF2 SA-14 Gremlin / 9K34 Strela-3 MANPADS Pack 1.0
-------------------------------------------------------------------------------------------------------
This pack features the SA-14 Gremlin. It is a man-portable, shoulder-fired, low-altitude,
infrared guided surface-to-air missile system (MANPADS) developed as a response to
the limited performance of the earlier SA-7 Grail. The missile was largely based on the
earlier Strela-2 and thus development proceeded rapidly.
The most significant change over the Strela-2 was the introduction of an all-new infra-red
homing seeker head. The new seeker worked on FM modulation (con-scan) principle,
which is less vulnerable to jamming and decoy flares than the earlier AM (spin-scan) seekers,
which were easily fooled by flares and even the most primitive infrared jammers. The
new seeker also introduced detector element cooling in the form of a pressurized nitrogen
bottle attached to the launcher.
The effect of cooling was to expand the seeker's lead sulphide detector element's
sensitivity range to longer wavelengths (slightly over 4 µm as opposed to 2.8 µm of
uncooled PbS elements). In practice this made possible the tracking of cooler targets
over longer ranges, and enabled forward-hemisphere engagement of jets under favourable
circumstances. The seeker also had better tracking rate, enabling the missile to track
maneuvering of fast and approaching targets.
A negative side effect from the aforementioned improvements was increased missile
weight, which caused a slight decrease in the kinematic performance compared with
Strela-2M (SA-7B). Against relatively slow, low-altitude battlefield air threats the overall
effectiveness was much improved.
The new system was accepted into service in 1974. Strela-3 missiles have been exported
to over 30 countries.
------------------------------------------------------------------------------------------
Known issues:
- System has limited all aspect capability mostly against slow, low-altitude targets.
- Helicopters have higher survival rate per hit because in some cases missiles hit the tail rotor
without causing significant damage. I guess this is another game engine characteristic.
- Low altitude (lower than 500 meters) performance is downgraded for current missile values.
By increasing noise rejection the missile becomes capable of hitting targets in lower altitude
but at the same time the single shot hit/kill probability is being increased to an unrealistic level.
- Fuze distances are longer compared with the actual lethal and damage radius of the system.
In SF2 world the real high explosive warhead quantity is big enough to destroy a fighter size
target even in 10 meters!
----------------------------------------------------------------------------------------------
As always open readme.txt first to see installation instructions and credits.
Lot of research and hard work was made to make this SAM as realistic as possible.
More than 2000 launches took place during testing!
Enjoy as much as you can this mod and leave comments with your in-game experience
in the support topic!
-----------------------------------------------------------------------------------------------
License:
This is a freeware; yet it can be redistributed only in other CombatACE mod packages.
You are free to make further modifications for own use but if you plan to release a modified
version of this package you must request permission first. In that case you must include original
read me file. This mod may not in any way, shape or form be used in any payware additions.
190 downloads
-
P-14 Tall King Radar
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
P-14 Tall King Radar
This file work and tested on SP2 only
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the files to Objects folder and the falowing to _TYPES.ini file
[TargetTypeXXX]
Name=GK-P-14
FullName=P-14 Tall King Radar
TargetType=EW_RADAR
;TargetType=RADAR
ActiveYear=1959
TargetValue=100
UseGroundObject=TRUE
GroundObjectType=GK-P-14
RepairRate=0.555
StartDetectChance=80
StartIdentifiedChance=20
IncreaseDetectChanceKey=10
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=Radar_Destroyed.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
copy the GK-P-14 folder to the ground object
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
Thanks to strahi for requsting this model to be made and making the data files I hope you will injout it
Me for making the model
and big thianks to AC members for there help.
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
161 downloads
-
Flakpanzer Gepard Anti-aircraft gun tanks
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Flakpanzer-Gepard AAA model
Flakpanzer Gepard
The Flugabwehrkanonenpanzer Gepard is an all-weather-capable German self-propelled anti-aircraft gun. It was developed in the 1960s and fielded in the 1970s, and has been upgraded several times with the latest electronics.
Type Self-propelled anti-aircraft gun
Place of origin West Germany
Specifications
Mass 47.5 t (46.7 long tons; 52.4 short tons)
Length Overall: 7.68 m (25 ft 2 in)
Width 3.71 m (12 ft 2 in)
Height Radar retracted: 3.29 m (10 ft 10 in)
Crew 3 (driver, gunner, commander)
Armor conventional steel
Main
armament
2 × 35 mm Oerlikon GDF autocannon, each with 320 rounds of anti-air ammunition and 20 rounds of anti-tank
Secondary
armament
2 × quad 76mm smoke grenade dischargers
Engine 10-cylinder, 37,400 cc (2,280 cu in) MTU multi-fuel engine
830 PS (819 hp, 610 kW)
Power/weight 17.5 PS/t
Suspension Torsion bar suspension
Operational
range
550 km (340 mi)
Maximum speed 65 km/h (40 mph)
https://en.wikipedia.org/wiki/Flakpanzer_Gepard
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
[TargetTypeXXX] <-------- Change to the next number at the bottom of you types list
Name=GK-Flakpanzer-Gepard
FullName=GK-Flakpanzer-Gepard
TargetType=AAA
;TargetType=MISC
UseGroundObject=TRUE
GroundObjectType=ZSU-23
ActiveYear=1960
TargetValue=25
RepairRate=3.22
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=Truck_DESTROYED.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Coupi for making all the data files and testing the model.
compufat for making the Brazilian skin.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
Vidoe by Coupi
202 downloads
- flakpanzer
- gepard
- (and 4 more)
-
UAZ-469
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
UAZ-469 model
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
[TargetTypeXXX] <-------- Change to the next number at the bottom of you types list
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat big thank you for making all 4 textures for the model and the Driver/Gunner.
Coupi for his outstanding work with the data file without him this is nothing big thank you, my friend.
Google for some photos and information.
Driver and gunner are free low poly from the net without skin.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
videos by Coupi
107 downloads
-
Ace Combat Nations
By Menrva
Ace Combat Nations
December 13th, 2020 (1st Release)
by Menrva
>For Strike Fighters 2 games
This mod is a fork of my nations expansion mod of the stock ThirdWire _nations.ini file. It includes only the nations and respective aviation services of the Ace Combat universe, AKA Strangereal. All roundels are based on official sources and references from all Ace Combat games. Here below a summary of the included services:
-Generic Mercenary faction, using the logo of Ace Combat's developer, Project ACES, as insignia.
-Osean Air Defense Force and Osean Maritime Defense Force (as seen in Ace Combat 5, Ace Combat Zero and Ace Combat 7).
-Yuktobanian Air Force and Yuktobanian Navy (as seen in Ace Combat 5).
-Erusean Air Force and Erusean Navy (as seen in Ace Combat 04 and Ace Combat 7).
-Free Erusea Air Force (available since 2006, as seen in Ace Combat 04, Ace Combat 5 and Ace Combat 7).
-Independent State Allied Forces Air Force and Independent State Allied Forces Navy (available since 2003 until 2006, as seen in Ace Combat 04 and Ace Combat 5).
-International Union Peacekeeping Force (available since 2007, as seen in Ace Combat 7).
-Belkan Air Force and Belkan Naval Aviation (as seen in Ace Combat 5 and Ace Combat Zero).
-Ustio Air Force (available since 1989, as seen in Ace Combat Zero).
-Sapin Air Force (as seen in Ace Combat Zero).
-Republic of Emmeria Air Force and Republic of Emmeria Navy (as seen in Ace Combat 6).
-Estovakian Air Force and Estovakian Naval Aviation (as seen in Ace Combat 6).
-Aurelian Air Force and Aurelian Naval Aviation (as seen in Ace Combat X).
-Leasath Air Force and Leasath Naval Aviation (as seen in Ace Combat X).
-USEA Unified Air Force and USEA Unified Navy (available since 1996 until 2002, as seen in the remake of Ace Combat 2, that is Ace Combat 3D).
-Voslage Air Force (as seen in Ace Combat 7).
-Nordennavic Royal Air Force (from Ace Combat: Northern Wings).
Other aviation services are known to exist in Strangereal, such as the Rectan Air Force, FATO Air Force and Valka Royal Air Force. However, there are no infos concerning such countries with no established flag and culture at the moment. Those are not included in the mod for the time being.
This mod removes the Real World aviation services included in Strike Fighters 2, as such it is not compatible with any mod out of the box. Modders and users are advised to tweak _userlist.ini files and _data.ini files for aircraft and ground objects, to make use of the new services added by this mod.
>Credits (in no particular order):
-nuni, for his suggestions and other Ace Combat themed mods.
-Astore, for his support and for being one of the few Italian Ace Combat fans like me.
-RythusOmega, for providing all Ace Combat 7 emblems, reworked for use in this mod.
-SuperOstrich, for providing hi-res remakes of the roundel of Nordennavic.
-mue, for sharing info about the functionality of the alias.lst file.
>Disclaimer:
This is a freeware; yet it can be redistributed ONLY in other CombatACE mods/mod packages.
This mod may NOT in any way, shape or form be used in any payware additions.
133 downloads
- osea
- ace combat
- (and 14 more)
-
M106A3-NC (No Crew)
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M106A3-NC (No Crew) model with 14 textures
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=50cal
SoundFileXXX=Mortar
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[50cal]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[Mortar]
Priority=NORMAL
Looped=FALSE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Big thanks to guuruu for fixing my mortar dataINI and adding these explosion effects and everyone who replied to my question and offered to help
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
60 downloads
-
M113 APC
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M113APC model with 15 textures
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=50cal
SoundFileXXX=Mortar
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[50cal]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[Mortar]
Priority=NORMAL
Looped=FALSE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
84 downloads
-
M113 APC (No crew)
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M113APC-NC (No crew) model with 15 textures
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=50cal
SoundFileXXX=Mortar
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[50cal]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[Mortar]
Priority=NORMAL
Looped=FALSE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
61 downloads
-
M113 UN and Ambulance
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M113 one UN and two ambulances
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
60 downloads
-
M113 ACAV from 60's to 2000 No crew
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M113 ACAV from 60's to 2000 No crew with more than 18 textures
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
218 downloads
-
Download Statistics
14,220
Files12,503
Comments26,868
Reviews