- Aircraft Carriers
- Battleships
- Destroyers
- Submarines
- Cruisers
- Frigates
- Cargo and Transports
- Patrol Craft
- Improved Skins for Ships
- Other
-
Type 45 Daring Class
By JuanchoGomez
Type 45 Destroyer Daring class for Strike Fighters 2 with Phalanx and Aster 30 missile
210 downloads
-
Zulfiqar class frigate
This model represents the Zulfiqar class frigate, also known as F-22P type, in service with the Pakistan Navy since 2009.
This class is an improved version of China's Type 053H3 Jiangwei-II class ships, armed with the same missiles but significantly more advanced close-in weapons. These general purpose frigates are Pakistan's most modern warships.
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
330 downloads
0 comments
Updated
-
SF2 "Sub Chaser" for WW2 and Post-War
By Wrench
SF2 "Sub Chaser" for WW2 and Post-War 9/3/2014
= For SF2, Full-4/5 Merged (Reccomended/Preferred) =
*Note: This is the SF2 version. A 1st Gen, SF/Wo* version will be relased shortly.*
*Note #2: as there exists another version of this type of ship by the DAT, THIS mod has a unique folder name that will -NOT- conflict for those End Users that may have that version.*
This mod represents a 'generic' Sub Chaser type patrol craft, but resembles closely the SC-497 class as used by the US Navy and Allies during WW2. Many other nations also used them after the war, for various patrol/security/escort functions.
It is classed as a "Patrol Boat" in the data ini, so it most likely will NOT show up attached to Battle Groups. However, it can be added via the 3w Mission Editor (like to convoys in Antishipping missions)
This was a collaborative effort by RussoUK (after discovering the ship deeply archived!) Spectre8750 for finalization and exportation, plus ini works by all of us. Very few tweeks by me. It was all pretty much done!
As always, fairly easy to follow, yet detailed install instructions are included. PLEASE read them!!!
Wrench
Kevin Stein
167 downloads
0 comments
Submitted
-
Suffren class frigate
This model represents the Suffren class frigate of the French Navy, in service from 1967 to 2007. They were the first French ships to be designed as guided missile frigates, tasked with escorting the Clemenceau-class aircraft carriers.
The two ships of the class, Sufren and Duquesne, are easily recognizable by their huge radomes housing the DRBI-23 3D radar. The ships' primary weapon is the Masurca SAM, designed using data from the US Navy's Terrier program.
Three different versions are included, covering each major refit of their long service lives, adding Exocet missiles as well as upgrades for the guns and electronics.
While officially referred to as frigates, the Suffren class are destroyers for all intents and purposes and have destroyer "D" hull numbers. Their in-game role and RWR signature reflects this.
See the readme for full details and credits. If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
357 downloads
-
SF2 Sub Type 214 Tridente class
By acesfakia
Tridente-class submarine
Hello
my first upload after so many downloads..................
This is beta release of the Type 214 sub..or Trident...
This is for sf2 with NAtlantic.....prefered....
Attention.....!!!!!..is armed with........ Harpoon missiles and they are working......!!!!
unzip the file
and put it in to strike fighters/........../ objects.... file directory....
Simply copy....... all the files in the respective......... directory of your game folder.... let overwrite the files.....
......................"User"\Saved Games\ThirdWire\StrikeFighters2\mod\........Object's....
include the weapons set-65 sss-4....agm-38a exocet......and the mk-38asw....with no lod's files
If you don't want ...don't copy paste the file's....
-----------------------------------------------------------
credit's
3d model =Acesfakia
ini.files =Acesfakia
Textures =Acesfakia
Weapon's=Fubar512
------------------------------------------------------------
p.s. Legal stuff:
This mod is freeware. Commercial use is not allowed.
Have a good hunt
------------------------------------------------------------
The Type 214 is a diesel-electric submarine developed by Howaldtswerke-Deutsche Werft GmbH (HDW). It features diesel propulsion with
an air-independent propulsion (AIP) system using Siemens polymer electrolyte membrane (PEM) hydrogen fuel cells.
The Type 214 submarine is derived from the Type 212,[2] but as an export variant it lacks some of the classified technologies of its smaller
predecessor most important of which is the non magnetic steel hull which makes the Type 212 submarine impossible to detect using a Magnetic Anomaly Detector.
A contract to build three boats for the Hellenic Navy was signed 15 February 2000 and a fourth one was ordered in June 2002.
The first boat was built at HDW in Kiel, Germany and the rest at the Hellenic Shipyards Co. in Skaramangas, Greece.
The Hellenic Navy named them the Papanikolis class.
Operators Greece
Republic of Korea
Pakistan
Turkey
Portugal
http://en.wikipedia.org/wiki/Type_214_submarine
234 downloads
0 comments
Updated
-
Midway-Class Aircraft Carrier SCB-110
By Peugeot205
I proudly present you the well-known Midway-Class Aircraft Carrier SCB-110
What's in?
1) An accurate model of the Midway class aircraft carrier under the SCB-110 upgrade fully compatible with SF2NA standards
2) Updated campaign files for SF2 Vietnam adding this new carrier
Requirements:
Any stand-alone SF2 installation , although , SF2 NA and SF2 Vietnam are recommended.
Installation:
Just Drag it to the MOD folder and when it says overwrite , say yes to all.
Credrits:
Original 3D model: CJLivesey
3D Model modifications: FRPignon
Textures: CJLivesey, FRPignon and TK
HD textures: MigBuster
Data.ini: FRPignon and KJakker
Guns: KJakker
Have fun
FRPignon
855 downloads
- midway class
- coral sea
- (and 3 more)
-
Jiangwei class frigates
These three models represent the Type 053H2 Jianghu-III class, Type 053H2G Jiangwei-I class, and Type 053H3 Jiangwei-II class frigates, in service with the People's Liberation Army Navy. The Jiangwei series frigates were developed from the earlier Jianghu series, with the Jianghu-III being a transitional design, and are considered to be China's first true multi-role frigates.
All necessary sounds, guns, and weapons are included in this package. Hull number decals and helicopter support are not featured, as these ships are meant to be used as OPFOR units, but they can be released on request.
Note: This model has been updated for full compatibility with SF2:NA.
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
664 downloads
0 comments
Updated
-
SF2 Small Cargo Ship (Soviet/Russian)
By Wrench
SF2 Small Cargo Ship (Soviet/Russian) 7/2/2014
= For SF2, Full 5 Merged RECCOMENDED! =
**Note: This mods uses SF2NA style coding for the ship, included the Col lod, radar statements and so forth. You SHOULD be adding this to a FUll-5 Merged install for proper operation. This mod was built and tested in the SF2NA environment.***
This is a modification to Stephan1918's VERY cool First Eagles cargo ship. This ship has been reflagged for Soviet use. It's operational dates are 1918-2050, so it should cover all time frames. This is very similiar to what I did for the WW2 versions, seen in both the Atlantic and Pacific. This'll add yet another target for Auntie Ship mission. Be advised -- it's bites back!
I've given it a 'generic' name as "MV North Star Class Cargo Ship". I've tried to keep it dissimiliar from other Soviet Cargo ships available in other mods (hence the folder being called "SovCargoShip").
As always, fairly easy to follow, yet detailed install instructions are included. So, please read them. As mentioned above, give the "Notes" section a read too.
Happy Sailing!
Wrench
Kevin Stein
214 downloads
0 comments
Submitted
-
DDG-173 Kongo class Aegis destroyer
This model represents the Kongo class destroyers (DDG-173~DDG-176), in service with the JMSDF from 1993 to present. They are based on the Arleigh Burke class, with a significantly longer hull, higher superstructure, and indigenous Japanese systems. The Kongo and successor Atago (coming soon to SF2) are the most advanced and powerful warships in Asia and among the largest destroyers in the world.
This model has been almost completely rebuilt and retextured compared to my previous version (3.7), and like the real thing she can now lead JMSDF task groups comprised of the Takanami, Murasame, Asagiri, and Hatsuyuki. As with my other vessels, I have included authentic name and hull number decals for each ship of the class, plus the necessary sounds, guns, and weapons. See the readme file for full details.
An experimental data file is included, labelled "DDG-173_EX.ini" (The "EX" stands for "experimental" as well as "extremely dangerous.") This sacrifices the cool-looking vertical launch for a significantly more accurate multi-target system that better reflects the actual performance of an Aegis destroyer. Use whichever you prefer, depending on if realistic visuals or realistic performance is more important to you. An optional assisted takeoff mode for helicopters is also included on the flight deck.
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
701 downloads
-
Takanami class destroyer
This model represents the Takanami class destroyers (DD-110~DD-114), in service with the JMSDF from 2003 to present. The Takanami is an improved version of Japan's modern workhorse, the Murasame class, with a larger main gun and more flexible vertical launch system. Two variants are included, the original as-built vessel, and a recent refit with ESSM replacing Sea Sparrows.
The Takanami class features well-rounded armament including a 127mm gun, two Phalanx CIWS, two 4-canister SSM launchers, ASW torpedoes, and a 32-cell Mk41 for VL-ASROC missiles and SAMs.
A full names list and authentic decals are included. The model features a helicopter deck and a few other surprises. This ship is best used in conjunction with my Kongo class, Murasame class, Asagiri class, Hatsuyuki class, and other upcoming JMSDF capital ships.
300 downloads
0 comments
Updated
-
CVN-65 Enterprise (*)
By paulopanz
Here you get the SF-2 upgrade for YAP CV-65 post Vietnam
What's in:
- The Big-E full working in SF-2NA standards
Credits:
- YAP Carrier Pack II for original model (not icluded)
- paulopanz for SF-2 porting
- KJakker for V. 0.1 tweakings
- Snapper21 for V. 0.1 testings
Install:
- extract YAP Carrier Pack II
- copy CVN-65 in your mod Objects/GroundObject/ folder
- make a copy of CVN-65-02CC.LOD name it "CV-65_COL" and leave it in Objects/GroundObject/CVN-65 folder
- extract thIS pack
- copy all Objects folder in your mod folder and overwrite
Enjoy.
@ paulopanz
(*) This is NOT a complete pack: you must own YAP Carrier Pack II
633 downloads
-
Essex Class - Post WWII (*)
By paulopanz
This pack bring you the original Essex Class carrier in postwar service. Ideal for KAW install.
What's in:
- a new carrier class with all proper numbers
Credits:
- YAP Rising Sun for original model (not icluded)
- paulopanz for SF-2 porting, skin editings, decals etc.
- Spillone104 for help & test
Install:
- extract the pack
- take Essex_1115.lod file from your YAP Phase 3
- copy it in Objects/GroundObject/CV-9 folder
- make a copy name it "Essex_1115_Col" and leave it in CV-9 folder
- copy all Objects folder in your mod (es KAW) folder and overwrite
Enjoy.
@ paulopanz
(*) This is NOT a complete pack: you must own YAP Rising Sun to use.
240 downloads
0 comments
Submitted
-
Essex Class SBC-27 (*)
By paulopanz
This pack bring you the long hull SBC-27 Essex Class carrier. Ideal for KAW install.
What's in:
- a new carrier class with all proper numbers
Credits:
- YAP Carrier Pack I for original model (not icluded)
- paulopanz for SF-2 porting, skin editings, decals etc.
- Spillone104 for help & test
Install:
- extract the pack
- take Essex_Korea.lod file from your YAP Carrier Pack I
- copy it in Objects/GroundObject/CV-9_SBC-27 folder
- make a copy name it "CV34_Col" and leave it in CV-9_SBC-27 folder
- copy all Objects folder in your mod (es KAW) folder and overwrite
Enjoy.
@ paulopanz
(*) This NOT a complete pack: you must own YAP Carrier Pack I
231 downloads
-
Murasame class destroyer
This model represents the Murasame class destroyers (DD-101~DD-109), in service with the JMSDF from 1994 to present. These modern warships are Japan's workhorse, capable of anti-air, anti-surface, and anti-sub combat. Two variants are included, the original as-built vessel, and a recent refit with ESSM replacing Sea Sparrows.
The Murasame class features well-rounded armament including a 76mm gun, two Phalanx CIWS, two 4-canister SSM launchers, ASW torpedoes, and two vertical launch systems: a 16-cell Mk41 for VL-ASROC missiles, and a 16-cell Mk48 for Sea Sparrow missiles. The Mk48 is a low-cost light-weight vertical launch system equipped on many NATO and allied ships.
A full names list and authentic decals are included. The model features a helicopter deck and a few other surprises. This ship is best used in conjunction with my Kongo class, Asagiri class, and upcoming JMSDF capital ships.
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
365 downloads
-
Hatsuyuki class destroyer
This model represents the Hatsuyuki class destroyers (DD-122~DD-133), in service with the JMSDF from 1982 to present. They are among Japan's most numerous and modern general-purpose escorts, and the first to use Combined gas or gas (COGOG) propulsion.
The Hatsuyuki class features well-rounded armament including a 76mm gun, two Phalanx CIWS, an 8-cell Sea Sparrow launcher, two 4-canister SSM launchers, ASROC launcher, and ASW torpedoes.
A full names list and authentic decals are included. The model features a helicopter deck and a few other surprises. This ship is best used in conjunction with my Kongo class, Murasame class, Asagiri class, and other upcoming JMSDF capital ships.
265 downloads
0 comments
Submitted
-
Asagiri class destroyer
This model represents the Asagiri class destroyers (DD-151~DD-158), in service with the JMSDF from 1989 to present. An enlarged and upgraded version of the earlier Hatsuyuki class, they are among Japan's most numerous and modern general-purpose escorts.
The Asagiri class features well-rounded armament including a 76mm gun, two Phalanx CIWS, an 8-cell Sea Sparrow launcher, two 4-canister SSM launchers, ASROC launcher, and ASW torpedoes. Sensor systems include the world's first naval AESA radar, OPS-24, designed and built in Japan.
A full names list and authentic decals are included. The model features a helicopter deck and a few other surprises. This ship is best used in conjunction with my Kongo class, Murasame class, and other upcoming JMSDF capital ships.
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
401 downloads
-
Kidd class and Kee Lung class destroyers
This model represents the Kidd class destroyers, multi-role warships based on the Spruance class. Originally built for the Imperial Iranian Navy, they were cancelled after the 1979 revolution and completed for the US Navy instead, serving from 1981 until 1999.
After decommissioning, all four ships were sold to Taiwan. They were recommissioned for the Republic of China Navy as the Kee Lung class starting in 2005. These ships are included in the package as a separate variant with updated weapons and custom decals, and are capable of leading ROCN task groups in missions.
The Kidd class will join existing USN task groups once installed, but for ROCN task groups, you will need an additional ship pack.
See the readme for full details. If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
416 downloads
-
Taiwan Navy ship pack
This package includes the Cheng Kung class frigate, Chi Yang class frigate, and Chien Yang class destroyer of the Republic of China Navy. I extracted and converted the stock USN versions of the O.H. Perry, Knox, and Gearing to create these Taiwanese variants.
They are by no means perfect representations of the actual thing, since many of the ships were refitted with additional and/or indigenous weapons after being acquired by the ROCN. However, these should be "close enough" to facilitate some naval battles over the Taiwan strait.
Note: You will require a capital ship to create a proper task group in game, such as the Kee Lung class (Taiwan's most powerful warship), available here.
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
547 downloads
0 comments
Updated
-
Ark Royal v3 (R09)
By MigBuster
More detail added to skins and lights added.
Includes 2 different Deck styles.
See the Readme for info and credits
You need the full Ark Royal model from eburger68 (you just paste in this mod and overwrite):
http://combatace.com/files/file/13758-sf2na-ultimate-carriers-pack/
Tested in SF2NA only
638 downloads
0 comments
Submitted
-
Julhelm's Container Ship
By Fubar512
Julhelm's Container Ship for SF2
Model and Textures: Julhelm
Effects and .ini work: Fubar512
This mod is designed and optimized for the SF2 series, and may not work properly in SF1.
To install: Simply extract the contents of the 7z archive file into the mod (saved games) folder of the desired title. For example, using SF2NA, the default path would be "YOUR NAME/Saved Games/Thirdwire/StrikeFighters2NorthAtlantic"
Note that model's running lights will be on all the time. This is currently due to the limitations of the series.
To enable the included sounds, you must have access to the soundlist.ini, which can be extracted from the flightdata,cat file. It must then be placed into your game's flight folder, and the following edits should be made to it (note, if you have a custom soundlist.ini already, simply add the following lines in their appropriate numerical order. Don't forget to edit the XXX entries to match your existing sequence).
SoundFileXXX=Underway
SoundFileXXX=MarineDiesel
[underway]
Priority=Normal
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=0
[MarineDiesel]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=0
388 downloads
-
LCS-1 Freedom class Littoral Combat Ship
This model represents the first Littoral Combat Ship, USS Freedom, in commission with the US Navy since 2008. These vessels are designed to be fast, stealthy, and highly modular.
This package includes decal sets for all current and future ships of the class, plus all necessary sounds, guns, and weapons such as the exclusive RIM-116 Rolling Airframe Missile. The ship can support two helicopters. See the readme file for full details.
A SRBOC countermeasures system has been installed to help defend against anti-ship missiles. This system is still in the beta stages, but if well-received, will be added to my other models as appropriate.
The weapon systems, collision mesh, and decals have been updated for compatibility with SF2: North Atlantic and the March 2012 patch. If you have not installed/do not plan to install either, this model will not work properly.
When setting up a task force, using the USNgrey texture will allow hull decals based on the ship number. This is bugged in single missions (as the ship number apparently defaults to 90 and can't be changed), so select a specific texture set with the hull number you want.
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
652 downloads
0 comments
Updated
-
C-14 China Cat class
This model represents the C-14 China Cat series, a small missile boat designed in China for use in the Middle East. It has been in service with the Islamic Republic of Iran Navy since 2002, and it is also used by the PLAN in limited quantities to test new light weaponry.
The China Cat can reach speeds of up to 50 knots and can carry a variety of weapons. Three variants are included in this package with the following weapons:
C-701, a very small anti-ship missile designed for attacking other patrol boats and fast attack craft.
C-704, a significantly larger anti-ship missile developed from the C-701 designed for attacking medium-size vessels.
122mm unguided rockets in a 16-round launcher for light artillery support
All versions have a 23mm cannon on the bow in addition to the above.
Optional for new modders:
As this model was built as part of a tutorial I made for CombatAce, I have included the 3D Max files and texture templates in a separate package.
CombatAce modders are free to modify these files as they see fit to create alternate configurations or entirely different vessels.
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
296 downloads
- china cat
- patrol boat
- (and 2 more)
0 comments
Submitted
-
Udet Rescue Bouy and S7-S13 Class E-boat for SF2 WW2 Battle of Britain Installs
By Steve T
"Udet-Seenotbojen" or Udet Rescue Bouy and S7-S13 Class E-boat for SF2 WW2 Battle of Britain Installs
To install, copy the included Objects, Effects, Missions and Sound folders into your MOD folder and make the INI file edits described below. If you already have an E-boat in your ground objects, back it up. If you don't want a high poly E-boat model, maybe just install the Udet-bouy. Tested in a WW2 Install based on SFNA patched to June 2012 Level. You can also slip the E-boat into your Euro WWII as it is a ground object, same goes for the Udet-bouy but you will not be able to use the custom Target placement as this has been written for the Battle of Britain Terrain.
All users should be prepared for longer load times as the E-boat model weighs-in at around 5.6 MB despite my poly-crunching and pruning -- the original was MUCH bigger this! If you want a smaller model, try copying and renaming LOD2 to LOD1 -- you will be missing crew, dingies and torpedos but have a smaller, but still big, file.
Talking of the original, the base model that I've imported into SF2 is a fantastic 3DS Max model by Alvaro Alves of De Espona 3D Models and is released as a creation here under a Royalty Free License. The version here is very heavily edited and with mostly new textures.
The Udet-bouy is my own creation.
This started out as a small project to learn 3DS Max by making a low poly Udet-bouy but it kind of got out of control! So, a LOT of work for such a little object and it's big brother but worth it I think. If you're a 109 pilot with a damaged engine limping back to France, try a belly landing next to an Udet-bojen and then swim for it!
Hope you like it,
Steve T.
February 2014
134 downloads
-
SF2 WW2 MTO Regia Marina Cargo Ship
By Wrench
SF2 WW2 MTO Regia Marina Cargo Ship 2/20/2014
-- Something for the WW2 MTO players --
= For SF2, Full-5 Merged (Reccomended/Preferred) =
Yet another repaint/repurpose of Stephan1918's EXCELLENT First Eagles cargo ships. This time, we're representing merchant ships of the Italian Navy (Regia Marina) of WW2.
This will give you something other than the stock cargo ship or anything else (available or not) for auntie-shipping missions in The Med
These ships ARE armed, to 2 20mm guns, so they WILL shoot back when under attack!!
As always, fairly easy to follow, yet detailed install instructions are included. So, please =READ= them BEFORE installing this mod!!!. You'll also be editing your sound list, if you haven't already, to add the ship sounds
Happy Hunting!
Wrench
Kevin Stein
edit: the ship is NOW in the zip. sorry folks!
168 downloads
-
USS Coontz (*)
By paulopanz
The Farragut class was the second destroyer class of the United States Navy to be named for Admiral David Glasgow Farragut.
The class is sometimes referred to as the Coontz class, since Coontz was first to be designed and built as a guided missile ship,
whereas the previous three ships were designed as all-gun units and converted later.
Ten Farragut-class ships were ordered between 1955 and 1957.
Each ship displaced 5,800 tons under full load, with a length of 512 feet (156 m), a 52-foot (16 m) beam and a top speed of 33 knots (61 km/h).
Originally commissioned as guided missile frigates (DLG), they were redesignated as guided missile destroyers (DDG) under the fleet realignment in 1975.
They were also the only redesignated ships to be renumbered as well under the realignment, with the first unit changing from DLG-6 to DDG-37 and
all subsequent vessels being renumbered upwards in order.
All ships of the class were decommissioned between 1989 and 1994 and subsequently scrapped.
What's in:
- a whole working escort class SF-2 ready for Vietnam era scenarios
- numbers/names decalset
(*) You need YAP to grab the lod file
CREDITS:
- Yankee Air Pirate (needed)
- Paulopanz SF-2 porting & new decals
- Colmack for missiles put in place
INSTALL:
- extract the rar
- take Coontz2.lod in GroundObject/DLG-9 folder from your Yap WoV install
- put it inside GroundObject/Coontz extracted folder
- put all in your main mod folder
enjoy
@paulopanz
356 downloads
-
Download Statistics
14,331
Files12,610
Comments26,977
Reviews