Strike Fighters 1 Series by Thirdwire

WoI Hangar and Loading Screen Set 1
 
The enclosed screens are redesigns of many of my original 'Mid East Wars' set, now using the new format for Wings Over Isreal. (the set up got changed ... again!!)
 
They replace the other, earlier versions built for SF/WoV/WoE. In many instances, the same names are used, so don't feel obligated to safe the old ones, unless you're using them in any of the other games.
 
You'll get Hangar Screens for the following aircraft:
 
EAF Meteor 4
EAF Spitfire 5
EAF/UAR Spitfire 22
IDF Ahit
IDF Baz
IDF Beaufighter
IDF Brakeet (F-16D for those that don't know)
IDF Harvard
IDF Kfir (for all variants)
IDF Meteor F8
IDF Mirage 3 CJ
IDF Netz (F-16A)
IDF Ouragan
IDF Phantom (need I say?)
IDF Spitfire 9
 
You'll get Loading Screens for these aircraft:
 
Brakeet
IDF Meteor F8
Kfir
Mirage 3CJ
Ouragan
Vautour
 
Easy to follow instructions in the enclosed readme ... sorry there's no picture, but most of you already know what they look like
 
Enjoy!
Wrench
kevin stein

This is a F-5E GM type
 
 
 
i want to thank kei nagase for the idea and Bosco Hsuean for F-5 template.
 
 
Have fun and a nice fly

MiG-21R (NATO "Fishbed-H")
Single-seat tactical reconnaissance version of the MiG-21PFM.
 
Developed after the Korean War, the MiG-21 very much mirrored the contemporary U.S. designed F-104. It was a lightweight, point defense interceptor that went on to perform a multi-role mission. It still remains in service in both its original build and in remanufactured versions. While not without its faults including poor armament and visibility, limited avionics, and short endurance, it also had many good features. Its small size made it very hard to see in combat, and while it has a high airspeed bleed off in a maneuvering fight, it retains the capability to point its nose at very low airspeeds. At least as important as those virtues, it was easily maintainable; an important factor for the many third world nations that flew it. While used primarily in the air defense role, they have also served in ground attack and reconnaissance missions. It was this last type of aircraft that I decided to model. The MiG-21R carried a centerline pod mounting cameras or Elint equipment and which replaced the 23mm cannon. While carrying this pod it was still able to retain a self defense capability of AA-2 "Atolls" and carry the vital, and ever present, external fuel tanks. Reference sources indicate that at least some MiG-21R's also carried wingtip mounted ECM pods, and Soviet no-export versions even have internal stronger ECM's.
 
 
 
 
 
This mod represent Soviet version of MiG-21R without ECM wing pods.(you have internal one's both passive and active - hit "Z" on keyboard to engage).
 
 
Installation
============
1. Copy the "MiG-21R" folder to your Strike Fighters\Objects\Aircraft folder.
 
2. Add weapon entry in Weapondata.ini....(RecPodASO - electronic pod with dispensers - thx a lot MoonJumper)
 
[WeaponDataxxxx]
TypeName=RecPodASO
FullName=Recce Pod w/ ASO-21
ModelName=RecPod_MiG21
Mass=150.000000
Diameter=0.500000
Length=2.000000
AttachmentType=WP,SOVIET
NationName=SOVIET
StartYear=1969
EndYear=2007
Availability=1
BaseQuantity=4
Exported=TRUE
ExportStartYear=1975
ExportEndYear=2010
ExportAvailability=0
WeaponDataType=4
StoreType=2
NumChaff=15
NumFlare=15
EjectPosition=0.000000,-1.700000,-0.200000
EjectVelocity=0.000000,-4.000000,-15.000000
 
 
 
3. Enjoy
 
 
Credits>
Thanx and credits goes to all community - I love you all.
 
P.S> Special thx for friendship goes to Pasko, MoonJumper, Jimbib and USAFMTL
 
 
 
Note 1: You must have MiG-21 recce pod (RecPod_MiG21) from WeaponsPack_03Jul06
 
Note 2: In loadout_ini for Atholl's stands R-3S
if you don't use weapon packs - it should stand AA-2 instead
 
Note 3: External tanks are not "jettisonable"
 
Note 4: Pit still have rear mirror - I will update fix for that eventualy

this is a mod for the original F-104G from Third Wire
 
included are
 
Cockpit mod from Batman1978
 
F-104G Chaff ------------ chaff dispenser
F-104G Flare ------------- flare dispenser
Lau-51 -------------------- rocket pod
TSC ----------------------- twin store carrier (2br)
Matra 250Kg -------------- bomb
Martin Baker Mk GQ7 ---- ejection seat
F-104G -------------------- antennas/ir-sensor/nav-computer
 
drop tanks and high-res. skins (2048) for GN wings
 
thanks to third wire for this great aircraft
thanks to Batman1978 for his cockpit mod
thanks to Amokfloo for his help regarding 3dsmax
 
ravenclaw_007

this is a mod for the original F-104G from Third Wire
 
included are
 
Cockpit mod from Batman1978
 
EL-70/73 ------------------ ecm/antennas/sensor
Lau-51 -------------------- rocket pod
TSC ----------------------- twin store carrier (2br)
Matra 250Kg -------------- bomb
Martin Baker Mk GQ7 ---- ejection seat
F-104G -------------------- antennas/ir-sensor/nav-computer
 
drop tanks and high-res. skins (2048) for GAF wings
 
thanks to third wire for this great aircraft
thanks to Batman1978 for his cockpit mod
thanks to Amokfloo for his help regarding 3dsmax
 
ravenclaw_007

A mod of FoxMonter's MB-326 GB, to create the SAAF's two air-air combat- killer of the '70s and '80s "Bushwars", the Aeromacchi Impala II "preproduction" aircraft.
 
In total, the Impala II was credited with at least six air-air kills (ACIG).
 
This is a complete package, which comes with one SAAF skin, Squadron No. 4 of the two-aircraft killer Capt. W. Westoby, two internal 30mm DEFA cannons, updated aircraft data file and a modified cockpit. Two Angolan kill markings grace the fuselage side.
 
Mod by Richard "Pitts2A" Ordway, uploaded with the permission of FoxMonter, USAFMTL and many others. For SFP1/WOV/WOE.
 
See the instructions file for install.
 
Complete credits and history in readme.
 
 
 
Enjoy

*****************************************************
 
303 (Kosciusko) Sqdn RAF
 
Skin for A-team Hurricane Mk 1
 
*****************************************************
 
Credits:-
 
Original Hurricane 1 skin by Gramps
303 Sqdn crest .tga by Gramps
RAF squadron code typeface is T. Horvath's RAF_WW2_851ATH, available from simmerspaintshop.com
 
303 Squadron Numbers, Tail numbers and kill marking .tgas, .ini edits and BoB Campaign 303 Sqdn Screens by Baltika.
 
*****************************************************
 
 
INSTALLATION
 
Unzip to temp folder.
 
Drop contents of unzipped folder into your BoB install, maintaining the file structure. It should be obvious where everything has to go.
 
To enable 303 Sqdn skin for campaign use, open BoB_data.ini campaign file, scroll down to [AirUnit002] and change the "DefaultTexture=" flag to read:-
 
DefaultTexture=303
 
I recommend creating a new pilot to start a fresh campaign using this skin, as the kill markings run from 0-30 kills. If you use an existing pilot you are likely to have a lot more kills on record so the kill markings won't show up.
 
To use the included campaign screens, open the BoB.ini campaign file, scroll down to [RAFUnit002] and make the following edits:-
 
CampaignBaseScreen=BoBBaseScreen303Sqdn.bmp
CampaignEndWinScreen=BoBWinner303Sqdn.bmp
CampaignEndLoseScreen=BoBLoser303Sqdn.bmp
 
*****************************************************
 
That's it. Go fly, and rack up kills ;-)
 
*****************************************************

 
Thanks and credit to the marcfighters of the aircraft model and templates maker.
 
Install skin to your SU-27 folder and Install Effect to your Effects folder.
 
Weapons install is Instructions in the Read Me file included in the zip.
 
*Do not Skin Folder rename.
 
-------------------------------------------------------------------------------------------------------------------------------
 
kei nagase
 
25.February 2008

MiG-21S (NATO "Fishbed-J")
Single-seat interceptor fighter version, equipped with an RP-22 radar and an optional external gun pod. (Incorrectly identified by NATO as the MiG-21PFMA); E-8, Type 88 Indian Air Force designation.
 
This was the first "third generation of MiG-21 Fishbeds".
Since the MiG-21R retained complete combat capability even if it wasn't actually used in practice, it was an obvious next step to produce a new fighter variant based on its updated airframe. After evaluation with prototypes designated "Ye-7S", the updated fighter was put into production at Gorkiy in 1965 as the "MiG-21S", or "I-95" as the Mikoyan OKB referred to it. It remained in production until 1968.
 
Aside from the new airframe, the MiG-21S featured some new kit, including a more powerful RP-22 Sapfir (NATO codename Jay Bird) radar with range at least doubled; an ASP-PF gunsight for the optional GSh-23 centerline cannon pod; and a link for the Lazur-M ground-control system. It could carry a range of heat-seeking or radar-guided AAMs, as well as rockets or bombs. Early on, the MiG-21S was qualified for carriage of a tactical nuclear weapon on the centerline pylon. The AOA sensor, the offset pitot tube, and the periscope was added in later production.This was the first version with four wing pylons.
 
Although the MiG-21R and MiG-21S incorporated many improvements, the weight increase meant that ceiling and climb rate had suffered. Worse, the hoped-for range increase with the increased fuel capacity didn't materialize, mostly due to fuel trim problems that made the expanded fuel capacity something of a fiction. Obviously the design needed some more rethinking, but that was going to take time and effort.
 
In the meantime, incremental improvements would have to do. An export version of the MiG-21S, the "MiG-21M" or "I-96", was built at the Znamya Trudaya factory from 1968 into 1971. It retained the older RP-21M radar, but featured a GSh-23L twin-barreled cannon in a flush belly installation, replacing the centerline GSh-23 cannon pod introduced on the MiG-21PFM. The flush cannon pallet carried a store of 200 rounds of ammunition and could be neatly winched out of the fuselage for servicing. The new cannon scheme not only reduced drag but permitted carriage of a fuel tank or other store on the centerline pylon. A steel blast panel was installed on the belly of the aircraft forward of the cannon muzzles. HAL of India license-built the MiG-21M, with initial production delivered in 1973.
 
This mod represent Soviet version MiG-21S with deleted cannon and IRM AA capability only, radar guided missles was only tested on "S" and fully implemented on MiG-21SM (none of "S" were exported).It differs from SM/MF engine wise too - it had weaker "R" type engine. Nevertheless it was large step forward compared to PFM.
 
 
Installation
============
1. Copy the "MiG-21S" folder to your Strike Fighters\Objects\Aircraft folder.
 
2. The Sound files goes in your Strike Fighters\Sounds folder.
 
3. Enjoy
 
 
 
 
Thanx and credits goes to all community - I love you all.
P.S> Special thx for friendship goes to Pasko, MoonJumper and Jimbib.... Ok Dave - to you also :yes:
 
Note : In loadout_ini for Atholl's stands R-3S
if you don't use weapon packs - it should stand AA-2 instead
 
e.g.>
[AirToAirLongRange]
Loadout[01].WeaponType=AA-2
Loadout[01].Quantity=1
Loadout[02].WeaponType=AA-2
Loadout[02].Quantity=1
Loadout[03].WeaponType=AA-2
Loadout[03].Quantity=1
Loadout[04].WeaponType=AA-2
Loadout[04].Quantity=1
Loadout[05].WeaponType=Tank490_MiG21
Loadout[05].Quantity=1
 
or select manualy in loadout screen menu....
 
Cheers !!! :yes:

High Res JAWS and RAF Woodbridge A-10A Schemes by Sundowner. Decals by USAFMTL
 
These are for wpnssgt's A-10s located here:
 
http://forum.combatace.com/index.php?autoc...p;showfile=3876
 
It is for the A-10 Early.
 
Just install it to that A-10 early and go fly.

F-14A Aggressors
 
F-14 by Mirage Factory
 
Skins by Storm & wpnssgt

SU-27SK of the Indonesian Air Force by Sundowner
 
Thanks to Marcelo for an excellent aircraft.
 
You can get the SU-27SK here:
 
http://marcfighters.combatace.com/arq/J11.zip
 
Just put into your SU-27SK folder and go fly.

RAF PTO camo for the Dev A-Team's Spitfire VIIIC by Gocad
 
Installation instructions:
---------------------------
Extract the contents of the rar file named 'RP' into a TEMP folder.
Read the text file for further instructions.
 
Thanks to:
- The Dev A-Team (capun, Gramps, Charles, Kesselbrut) for their Spitfires.
- Wrench for giving me his template, which is based on the orignial Spitfire skin by Gramps;
and for letting me use his decals.
 
----------------------------
If there are any questions regarding this skin or its installation do not hestitate to PM me at Combatace.
This skin is not supported by the Dev A-team. Please don't bother them with questions regarding this skin.
Do not modify it without my permission or upload it elsewhere. If you intend to use it for a project, contact me first.
 
Have fun!

RAAF camo for the Dev A-Team's Spitfire VIIIC by Gocad
 
Installation instructions:
---------------------------
Extract the contents of the rar file named 'AC' into a TEMP folder.
Read the text file for further instructions.
 
Thanks to:
- The Dev A-Team (capun, Gramps, Charles, Kesselbrut) for their Spitfires.
- Wrench for giving me his template, which is based on the orignial Spitfire skin by Gramps;
and for letting me use his decals.
 
----------------------------
If there are any questions regarding this skin or its installation do not hestitate to PM me at Combatace.
This skin is not supported by the Dev A-team. Please don't bother them with questions regarding this skin.
Do not modify it without my permission or upload it elsewhere. If you intend to use it for a project, contact me first.
 
Have fun!

This terrain mod for Wings Over Israel changes the color of the mountains so they are not such a reddish hue. The WOI terrain is otherwise excellent, but the mountain color just seemed a bit off to me.

VFA-102's 50th Anniversary F/A-18 Hornet by Stormtrooper.
 
Extract to your Mirage Factory F-18 Hornet folder and have fun with it.
 
Original Readme below and all credit to these guys for a great aircraft.
 
I hope my skin does it justice. Any issues let me know.
Revision 1.01, worked on the tail for better coverage.
Revision 1.02 Final
 
Thanks
ST
 
 
The Mirage Factory and Flying Toaster present :
 
MDD F/A-18A Hornet
 
Plane
3D : Flying Toaster
Mapping, SFP1 import : BPAo
Base Textures : Column5
VMFA-122 Markings : USAFMTL
FM : Column5
 
Cockpit
3D : Flying Toaster/BPAo
Textures : BPAo, HUD from Kesselbrut
 
Effects : BPAo
 
Pilote : Thirdwire
Texture : Diego
 
Bidons
3D : BPAo
Textures : Column5
 
Test Team
 
Camouflage, Manetsim, Sony Tuckson, Column5, Tom Venom, USAFMTL

RAF BoB camo for the Dev A-Team's Spitfire IA by Gocad
 
Installation instructions:
---------------------------
Extract the contents of the rar file named 'BB' into a TEMP folder.
Read the text file for further instructions.
 
Thanks to:
- The Dev A-Team (capun, Gramps, Charles, Kesselbrut) for their Spitfires.
- Wrench for giving me his template, which is based on the orignial Spitfire skin by Gramps;
and for letting me use his decals.
 
----------------------------
If there are any questions regarding this skin or its installation do not hestitate to PM me at Combatace.
This skin is not supported by the Dev A-team. Please don't bother them with questions regarding this skin.
Do not modify it without my permission or upload it elsewhere. If you intend to use it for a project, contact me first.
 
Have fun!

RAF ETO camo for the Dev A-Team's Spitfire VB by Gocad
 
Installation instructions:
---------------------------
Extract the contents of the rar file named 'RE' into a TEMP folder.
Read the text file for further instructions.
 
Thanks to:
- The Dev A-Team (capun, Gramps, Charles, Kesselbrut) for their Spitfires.
- Wrench for giving me his template, which is based on the orignial Spitfire skin by Gramps;
and for letting me use his decals.
 
----------------------------
If there are any questions regarding this skin or its installation do not hestitate to PM me at Combatace.
This skin is not supported by the Dev A-team. Please don't bother them with questions regarding this skin.
Do not modify it without my permission or upload it elsewhere. If you intend to use it for a project, contact me first.
 
Have fun!

Alternative icon for WoI
 
128x128
96x96
48x48
32x32
16x16

After Starscream here comes a mod skin of
 
Thundercraker and Skywarp skins in a pack with the leader STARSCREAM!!!
 
 
 
This is for you TX3RN0BILL
 
Have fun and a nice fly

Su-27 Flanker Skins by Sundowner.
 
Thanks to Marcelo for a great aircraft.
 
Install into your SU-27 Flanker by Marcelo and go fly.

F-4E Kurnass High Res Skins for WOI by Sundowner. There are 6 different skins for you to fly with.
 
Just install into your Kurnass folder and enjoy.

For transformers funs
 
STARSCREAM skin mod
 
Have fun and a nice fly!

compatible with WOI and FE+Expansion Pack 1

MiG-21UM Worn out skin No. 24 Sqdn Indian AF "Hawks"
-----------------------------------------------------------------------------------------------
 
Skin for Florian's excellent MiG-21UM model. Its a repaint of Florian's original Plain silver skin.
Just drop the 24sq_IAF folder to your MiG-21UM folder and you would be set.
 
----------
Credits
-----------
Amokfloo - for the excellent model and a base silver skin to work this skin on
Paladrian - for the superb MiG-21UM pit.
 
Sandesh "ghostrider883" Kanchan
February 21, 2008