Jump to content

Object Mods


Sub Category  
SUBCATEGORIES

    1. Buk M2E SAM system

      By angelp

      Buk M2E Surface to Air missile system
      The Buk missile system is a family of self-propelled, medium-range surface-to-air missile systems developed by the Soviet Union and its successor state, the Russian Federation, and designed to counter cruise missiles, smart bombs, fixed- and rotary-wing aircraft, and unmanned aerial vehicles
      The Buk system was created as a replacement of the 9k12 Kub in the air defenses forces of the Soviet Union and succesor states. A typical batallion consist of a command vehicle, a target acquisition radar vehicle and 6 TELAR vehicles, with three TELs.
      The M2E variant uses the 6x6 MZKT-6922 wheeled vehicle, in order to produce a hight road mobility and low operating cost variant of the system.
      The pack contains the 9K317E Buk M2E / MZKT-6922 TELAR and the 9S18M1E Snow Drift acquisition Radar mounted on a MZKT-6922 trnasport.
      Finally, this pack is still a BETA, need some fine tunning inthe missile and system performance and other vehicles asociated with the system like the command post and the low level radar. Is released for the CA community to have a modern variant of the Buk missile to play with.

      Instalation:
      -------------------------------------------------------------
      Put the content of the objects/ folder in your mod folder.
      Crédits :
      --------------------------------------------------------------
      3d Model, textures, INI files: angelp
      This addon is and will in all cases remain freeware, and is only allowed to be available here in Combat Ace
      Released under Combat Ace Fair-Use terms

      165 downloads

         (1 review)

      0 comments

      Submitted

    2. T-67 main battle tank

      By Gepard

      T-67 main battle tank (standard tank) (What if)
      *************************************************************
      This mod is made for SF2.
      ----------------------------------------------------------
      I. History
      What if the soviets would have introduced the Object 167 into service?
      Object 167 was the successor of the T-62 (object 166) with a new suspension system (was later used on T-72) and a new turbo diesel engine with 700 hp instead 580 hp in T-62.
      Top speed of the tank was 65 km/h on road, 40 cross country. Range around 450 km. So it was comparable with a Leopard 1 tank, but had a much better armour.
      There were some versions of object 167. One with gas turbine (helicopter engine), one with 100mm gun D-54TS (comparable with britisch L-7 gun) and one with 115mm smoothbore gun and ATGM Maljutka (AT-2 Sagger)
      The T-67, i present you here, is the version of object 167 with the D-54TS 100 mm gun.
       
      -----------------------------------------------------------------------
      II.
      CREDITS:
      The LOD file is made:
      ~~~~~~~~~~
      by TK
      The skin based on:
      ~~~~~~~~~~~~~
      TK's stock skin, modified by me.
      Implementation of tactical numbers and insignias on the turret are mady by me.

      The data.ini is made :
      ~~~~~~~~~~~~~~~~
      by TK
      and modded
      by me
       
      ----------------------------------------------------------
      III.
      INSTALLATION:
      -Unzip the folders into your object folder

      ----------------------------------------------------------
      IV.
      For remarks, comments, bugs, etc please use the forum or send me a PM.
      -------------------------------------------------------------
      V.
      The T-67 are FREEWARE. COMMERCIAL USE IS NOT ALLOWED!
      The additionally parts are NOT FREEWARE. Please check the readme of that files.
      ------------------------------------------------------
       

      Hope you enjoy it.

      Michael (Gepard)

      Made in Germany
      July 2019
       

      88 downloads

         (0 reviews)

      0 comments

      Submitted

    3. SF2 F-84F TMF Internal Tanks Fix

      By Cliff7600

      This object mod applies to this download :
       
      The data.ini file of this mod is the exact same file from the SF2 F-84F TMF with two modifications :
      - the guns position and MinMaxExtent values had been edited
      - the internal fuel tanks have been modified to be closer to the real aircraft
      Read the ReadMe-s
       
      I really struggled not to untitle this download "SF2 F-84F TMF Ineternal Tanks Fix"
      xD

      69 downloads

         (0 reviews)

      1 comment

      Updated

    4. Challenger 1 MBT, ODS

      By guuruu

      Challenger 1 tank, ODS
      =======================
      C R E D I T S
      --------------------
      GKABS - help with 3d bugs
      M O D E L
      ----------------
      3d is partial my job and mix of parts from free models from the net.
      Mapping, skins, game files are 100% mine.
      *************************************************************
      This is freeware; it CANNOT be distributed unless permissions are granted by myself.
      The original readmes, if any, and all other pieces of the package MUST remain intact.
      The names of all contributors, modders, suppliers, etc =MUST= be listed in any new readmes.
      This package and any part of it may NOT in any way, shape or form be used in any payware additions.
      *************************************************************
      THIS TANK MOD OR ANY PART OF IT MUST NOT BE HOSTED OR
      POSTED FOR DOWNLOAD ON ANY OTHER WEB SITE WITHOUT MY EXPRESS
      PERMISSION, OR USED FOR ANY OTHER PURPOSE THAN THIRDWIRE FLIGHT
      SIMULATORS, AND MUST NOT BE SOLD OR OFFERED FOR SALE BY ITSELF
      OR WITH ANY OTHER FILES OR MODS.
      *************************************************************
      Have fun
      Wojtek

      153 downloads

         (1 review)

      0 comments

      Submitted

    5. Cocas P-47D Razorback (ETO) Replacement Data Ini

      By Wrench

      SF2 WW2 ETO Republic P-47D "Razorback" Thunderbolt Replacement Data Ini 12/23/2014
       
      = For SF2 (Full4/5 Merged RECCOMENDED!)
      *This mod will =NOT= work in SF/Wo* 1stGen game installs. It was built for SF2 ONLY!!.*
       
      Replacement data ini for the Cocas Aircraft Factory P-47D Razorback. The aircraft is available here:
       
      http://combatace.com/files/file/15199-sf2-ww2-eto-republic-p-47d-razorback-thunderbolt-by-cocas/
       
      The full package is also getting the update. So, for that that have downloaded it already, use THIS data in.
      For that that haven't downloaded the aircraft yet, it will be included in the updated version (and what's stopping you from getting it???)
      All follow on Razorback mods (PTO, MTO, and maybe CBI) will incorporate this data ini.
       
      This FM has been slightly refined, and these fixes should (almost) stop the "tail stall" and end-to-end flip. Again, while not perfect, this is a bit better. Further refinements by Experts are most heartly requested!! (Roll rates may still be a little low, as well)
       
      As always, fairly easy to follow, yet detailed install instructions are included. PLEASE read them!!! And, apologies for the inconvience!
       
      Happy Landings!
      Wrench
      Kevin Stein
       
      =for Cocas Aircraft Factory, Prop Works Division=

      40 downloads

         (0 reviews)

      0 comments

      Updated

    6. Jet Hangars

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      Collection of 2 hangars with 12 skins one with open doors and the other closed.
      For SF2 only
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      Installation:
      Copy the files to Objects folder and the falowing to _TYPES.ini file
      [TargetTypeXXX]
      Name=GK-CHangar1
      FullName=GK-CHangar1
      ModelName=GK-CHanger1.LOD <---- change the number for the skin name you need
      TargetType=HANGAR
      ActiveYear=0
      TargetValue=50
      UseGroundObject=FALSE
      DamagePoint=140.0
      ArmorValue=24516080.0
      ArmorType=2
      RepairRate=0.150
      StartDetectChance=20
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      CollisionMesh=Shelter_Hardened1_col.LOD
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=
      SecondaryChance=100
      SecondaryEffect=LargeFire

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      87 downloads

         (0 reviews)

      0 comments

      Updated

    7. Sukhoi100Static.7z

      By russouk2004

      Static Aircraft   Converted from Freeware SSJ-100   by me Russouk2004.
      Sukhoi SJ-100 Superjet Airliner.static object.
      for adding to airports etc...
      NOT to be uploaded to any other site,other than at Combatace.com.
      Further skins when complete.
      For use in SF2......NOT for comercial use.

      65 downloads

         (1 review)

      4 comments

      Submitted

    8. Improved Ground Gun Accuracy

      By orsin

      The purpose of this mod is to improve the ground gun accuracy especially the AA Guns. It changes the game's default ballistic coefficient entries and make better speed retention for trajectory items. Thus it makes guns perform much better for anything flying straight line.
      I have included 2 types of data in this mod. Please choose the one that works better for you.
      Type A = Ballistic Coefficient changed to 1.1 times, better gun accuracy.
      Type B = Ballistic Coefficient changed to 1.2 times, even higher gun accuracy but may influence AI plane in missions.
       
      Also included the ballisticdata change program which when open in a folder that contains G1.dat, will allow you to change the entries. 
       
      For artillery, in addition to this mod, you can also change the accuracy in the gun data to 125 (yes, you can actually exceed 100)
       
       
      Installation:
      -----------------------------------------
      Extract the G1.dat file under Type A or Type B folder under Objects folder in your mod directory
       
      Uninstallation
      ----------------------------------------
      Delete G1.dat file under Objects folder in your mod directory
       

      131 downloads

         (0 reviews)

      0 comments

      Updated

    9. M109A2 howitzer static/dynamic with berm and sandbags

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M109A2 howitzer models one static and dynamic with berm and sandbags.
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please change the XXX with the correct number from your //Soundlist:
      [SoundList]
      SoundFileXXX=155MM_M126
      SoundFileXXX=TankEngine
      SoundFileXXX=GKTankTrack
      SoundFileXXX=50caliber
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [GKTankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [155MM_M126]
      Priority=NORMAL
      Looped=FALSE
      NumBuffers=2
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1500.000000
      MinDist=400.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [50caliber]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      The soldier is free model is from MIXAMO WEBSITE
      https://www.turbosquid.com/3D-Models/free-fbx-model-soldier-military-character-rigged/516949?referral=3dmdb
      (I am sorry that I don't have the model template for the texture in photoshop)
      compufat for helping me with the textures big thank you.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.

      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Site
      gkabs.net
      gulfknights.net

      105 downloads

         (2 reviews)

      1 comment

      Updated

    10. Air Base Bunker

      By GKABS

      Hello and thank you for downloading my work.
      What's included:
      all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      Installation:
      Copy all the files to Terrains folder and the falowing to _TYPES.ini file
      [TargetTypeXXX]
      Name=AB Bunker
      FullName=Air Base Bunker
      ModelName=GK-Bunker.LOD
      TargetType=AMMO_STORAGE
      ActiveYear=0
      TargetValue=200
      UseGroundObject=FALSE
      DamagePoint=70.0
      ArmorValue=2451608.0
      ArmorType=2
      RepairRate=0.050
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=12000.0
      DamagedModel=
      DestroyedEffect=AmmoDumpExplosion
      DestroyedModel=bunker1_destroyed.LOD
      SecondaryChance=0
      If you need any further help please read the knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      GKABS for creating the model and the skins
      Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
      And finally not to forget the wonderful site of https://combatace.com and all the nice member's and their dedicated support for this game.
      If you need any assistance please contact me at 
      gkabs@gkabs.net
      https://gkabs.net
       

      72 downloads

         (0 reviews)

      0 comments

      Updated

    11. Oshkosh M978 HEMTT Fire truck

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      http://gulfknights.net
      What's included:
      Oshkosh M978 HEMIT Fire truck models
      All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder.
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for making the texture for the fire truck.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      TurboSquid for using their model photos for references and for some texture.
      https://www.turbosquid.com/Search/3D-Models/m978
      Some textures have been used from other games that were in the google search.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net

      70 downloads

         (0 reviews)

      0 comments

      Submitted

    12. SF2 WW2 Bandidos FW-190A4 Tweeks Pack

      By Wrench

      SF2 WW2 Bandidos FW-190A4 Tweeks Pack                               9/23/2018
       -- Something for the WW2 ETO players --
      = For SF2, Full-5 Merged (Reccomended/Preferred) =
      A series of modifications to the recently released Bandidos Team FW-190A4 WW2 Luftwaffe fighter.
      Included are:
      Data ini (many changes/corrections)
      "main ini" (rearranged skin sequence - JG.26 is now the first one)
      new damage tgas (that looks better)
      loadout ini (now carries belly tank always by default on A-A missions)
      "Box Art" hangar screen
      For a full list of changes, corrections and adjustments, see below in the "Notes" section. A backup copy of the original data ini is included, but I forgot to backup the 'main' ini. You might want to do so before installing this package.
      As always, fairly easy to follow, yet detailed install instructions are included. So, please =READ= them BEFORE installing this mod!!!. Also, give the "Notes" section a read too.

      Happy Hunting!
      Wrench
      Kevin Stein
       
       

      85 downloads

         (0 reviews)

      0 comments

      Submitted

    13. M-84AS / M-84AB1 Yugoslav MBT

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M-84AS / M-84AB1 Yugoslav MBT model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please change the XXX with the correct number from your //Soundlist:
      [SoundList]
      SoundFileXXX=PKT762
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      SoundFileXXX=grenade
      [PKT762]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [grenade]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Nightshade/PR for searching information for the tank blueprint.
      AleksejFonGrozni as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
      https://sketchfab.com/3d-models/m-84-main-battle-tank-a6839bb9b0d7403aa80951c31d76fe18
      3Dimitrije as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
      https://sketchfab.com/3d-models/1984-uro-akovic-m-84-141ef5a5934742329b7d618c2e004f92
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      101 downloads

         (0 reviews)

      1 comment

      Submitted

    14. Insignias and tactical numbers for stock tanks

      By Gepard

      Tactical numbers and insignias for stock tanks
      *****************************************************
      This mod is made for SF2.
      ----------------------------------------------------------
      I.
      In the history it was common that tanks got tactical numbers and showed insignias for better friend and foe identification.
      This package included modded stock tank files, so that the tanks will show numbers and insignias in single missions and campaigns.
      It contains insignias and tactical numbers for:
      Leopard A1 to A5
      Centurion Shot and Shot Kal
      M48 Magach 3
      M60 Magach 6
      M48A2
      M48A3
      M60A1
      T-34-85
      T-54
      T-55
      T-62A
      T-72A
      For M48, M60, T-54 and T-55 i added workable anti-aircraft-machine guns. I also changed the armour of some tanks values to make them closer to real world
       
      -----------------------------------------------------------------------
      II.
      INSTALLATION:
      -Unzip the object folder into your SF2 mod folder

      ----------------------------------------------------------
      III.
      For remarks, comments, bugs, etc please use the forum or send me a PM.
      -------------------------------------------------------------
      IV.
      All  files are FREEWARE. COMMERCIAL USE IS NOT ALLOWED!
      ------------------------------------------------------

      ------------------------------------------------------------

      Hope you enjoy it.

      Michael (Gepard)

      Made in Germany
      December 2021
       

      113 downloads

         (1 review)

      1 comment

      Submitted

    15. Tuskegee Airman Captain Roscoe Brown

      By russouk2004

      Tuskegee Airman Captain Roscoe Brown, 100th FS, 322nd FG.
      Captain Roscoe Brown,   new pilot in tribute to the Brave and most excellent Black Pilots of the "Tuskegee" airmen squadrons....
      its him as he looks here in pic below...Brave man...a Hero fighting on two fronts The Germans and Racism.
       

      26 downloads

         (0 reviews)

      2 comments

      Submitted

    16. Smokeless rocket effects pack (Beta Version)

      By simonmiller416

       [ It is A very BETA Version,still need some adjustment! ]
      1.What is this?
      So it is just a simple effects mod and will make your AIM-120s、9x、HARMs etc looks cool and closer to what it looks like in real life,we can see the pics.
       
      2.How to make it work？
      (1)unzip the 7z,lol, then copy the Effects folder into your SF2 main folder；
      (2)Open WeaponsEditor and find whatever missile u want to edit, then find [Booster Effect] under Propulsion Data, then change it to "MissileSmokelessFireEffect";
      OR
      (2) open the _data.ini in the missile folder, the edit [BoosterEffectName=]
       
      P.S I made 3 versions : [MissileSmokelessFireEffec] for AIM-120s, [MissileSmokelessFire9XEffect] for AIM-9Xs, and [MissileSmokelessFireLgEffect] for AGM-88s or AGM-65s, be clear before u wanna edit...

      86 downloads

         (0 reviews)

      6 comments

      Updated

    17. UAZ-469

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      UAZ-469 model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
      [TargetTypeXXX] <-------- Change to the next number at the bottom of you types list

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat big thank you for making all 4 textures for the model and the Driver/Gunner.
      Coupi for his outstanding work with the data file without him this is nothing big thank you, my friend.
      Google for some photos and information.
      Driver and gunner are free low poly from the net without skin.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      videos by Coupi
       

      107 downloads

         (0 reviews)

      1 comment

      Updated

    18. Mujahideen and Rebel Squads

      By guuruu

      Middle East Squads
      =================
      M O D E L
      -----------------
      Model, mapping, skins, game files are 100% mine.
      *************************************************************
      This is freeware; it CANNOT be distributed unless permissions are granted by myself.
      The original readmes, if any, and all other pieces of the package MUST remain intact.
      The names of all contributors, modders, suppliers, etc =MUST= be listed in any new readmes.
      This package and any part of it may NOT in any way, shape or form be used in any payware additions.
      *************************************************************
      THIS INFANTRY MOD OR ANY PART OF IT MUST NOT BE HOSTED OR
      POSTED FOR DOWNLOAD ON ANY OTHER WEB SITE WITHOUT MY EXPRESS
      PERMISSION, OR USED FOR ANY OTHER PURPOSE THAN THIRDWIRE FLIGHT
      SIMULATORS, AND MUST NOT BE SOLD OR OFFERED FOR SALE BY ITSELF
      OR WITH ANY OTHER FILES OR MODS.
      *************************************************************
      Have fun
      Wojtek

      143 downloads

         (0 reviews)

      3 comments

      Submitted

    19. USMC USA, NATO, and Israel M109A2 Howitzer

      By GKABS

      Hello and thank you for downloading my work.
      What's included:
      Two USMC USA, NATO, and Israel M109A2 howitzer models one with the Spades up and the other is down.
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please change the XXX with the correct number from your //Soundlist:
      [SoundList]
      SoundFileXXX=155MM_M126
      SoundFileXXX=TankEngine
      SoundFileXXX=GKTankTrack
      SoundFileXXX=50caliber
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [GKTankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [155MM_M126]
      Priority=NORMAL
      Looped=FALSE
      NumBuffers=2
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1500.000000
      MinDist=400.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [50caliber]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for helping me with making these textures big thank you.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.

      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Site
      https://gkabs.net
      https://gulfknights.net

      99 downloads

         (0 reviews)

      3 comments

      Submitted

    20. SF2 WW2 PTO B-26B Marauder Adjustment Pak

      By Wrench

      SF2 WW2 PTO B-26B Marauder Adjustment Pak                8/29/2017
       -- For the WW2 PTO players --
      = For SF2 ONLY, Full-5 Merged (Reccomended/Preferred) =

      This package contains a new, modified data in for the B-26 Marauder, as used in the
      PTO (Southwest Pacific ie: New Guinea) during WW2. Also included is a "backed up" copy
      of the original data ini, just for safety's sake.
      If you have this aircraft already, THIS is the pack to use. The full aircraft,
      available here in the CA Downloads, has already been updated for new users.
      Reminder - if you have this aircraft already, you do NOT need to redownload the entire
      aircraft again.
      = Instructions for Use:
      unzip to a temp folder or your desktop.
      Copy/paste the B-26_data.ini (and B-26_Data - copy.ini) You know, copy them BOTH into
      the B-26's folder in you PTO-centric mods folder. 
      Go fly.
      Good Hunting!!
      Kevin "Wrench" Stein
      Updated 8/29/2017
      Changes:
      All hit boxes reset or newly created for those components without
      Small adjustment to some FM parameters.
      Destroyed model referenced to a stock 3W aircraft, available in all versions

       

      42 downloads

         (0 reviews)

      0 comments

      Submitted

    21. DLC 28: AVIA S-99/S-199 Flaps Fix

      By gerwin

      Strike Fighters 2 - DLC 28: AVIA S-99/S-199 Flaps Fix
      Fix for the bugged flaps of the aircraft Avia S-99 and S-199.
      Fixes the meshes and adjust the data.ini for both planes.
      This is a patch for the file DLCData028.DLC of 121.878.708 bytes
      Found in your SF2\DLC folder.
      For safety backup your original DLCData028.DLC file.
      The distance LODs will not be fixed, so it is advisable to change the distance in S-99.ini and S-199.ini  like below:
      [LOD001] Filename=S-99.lod //Distance=120 Distance=300 Gerwin 4-7-2019
      http://members.quicknet.nl/lm.broers/
       
       

      66 downloads

         (0 reviews)

      0 comments

      Updated

    22. M113 ACAV 60's and 70's

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M113 ACAV  60' and 70's model with 15 textures
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=50cal
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [50cal]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      126 downloads

         (1 review)

      0 comments

      Updated

    23. Modern Diesel-Electric Train

      By strahi

      Finally we now have a modern train model. Thanks to my friends Angela and Gkabs, for the help. I hope you'll like it. If anyone wants to make a better skin, I thank you in advance.
       

      108 downloads

         (0 reviews)

      3 comments

      Submitted

    24. M577-CPC with command tent

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M577-CPC 80s up to 2000 and after with a command tent ith 10 textures
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      158 downloads

         (2 reviews)

      0 comments

      Updated

    25. Ludun 2000 (LD-2000) SPAAGM

      By angelp

      Ludun 2000 (LD-2000) SPAAGM
      The Ludun-2000 is a Chinese copy of the Thales Nederland Goalkeeper 30 mm close-in weapons system (CIWS) mounted on the rear a 8 x 8 single cab flat bed truck and generator and system container behind the cabin. 
      The Type 730B gun is a copy of the General Electric GAU-8 30 mm x 173 mm seven-barrel Avenger gun used on the A-10.   It fires at 4,200 rounds-per-minute with the APDS round having a muzzle velocity of 1,150m/sec and the HE cartridge of 920m/sec.  There are two 500 round cylindrical magazines either side of the gun.
      By design, the LD-2000 is essentially a land based derivative of the existing PLAN Type 730 CIWS, itself modelled on the closed loop tracking US Phalanx CIWS and EU Goalkeeper CIWS.
      More recent imagery depicts the addition of a mast mounted search radar and six launch tubes for the TY-90 Surface-to-Air-Missile.
      Instalation:
      -------------------------------------------------------------
      Put the content of the objects/ folder in your mod folder.
      Crédits : 
      --------------------------------------------------------------
      3d Model, textures, INI files: angelp
      This addon is and will in all cases remain freeware, and is only allowed to be available here in Combat Ace
      Released under Combat Ace Fair-Use terms

      121 downloads

         (1 review)

      0 comments

      Submitted



×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..

  I accept