Leaderboard

--------------- Spitfire for CombatAce --------------- SF2 version 2021 TurboSquid : original 3D model Snapper21 : source file donated to CA Wrench : project development origin and inis Starfighter2 : original Spitfire Mk9 cockpit Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis. Cliff7600 : textures editing, decals and inis, cockpit editing. Thirdwire : textures and inis. These are the models made for CombatAce from the original TurboSquid 3D source file. It is made to be downloaded for free at CombatAce site only, and not to be used in any other way. The models have been designed for a SF2 / ThirdWire use and nothing else. Not to be merged with other files sharing the same original 3D model. - Spitfire Mk5a - Spitfire Mk5b (early) - Spitfire Mk5b - Spitfire Mk5c

HQ-9 Self Propelled Air Defence System The FD-2000/HQ-9 was developed to provide a long range SAM capability, distinct from the medium range capabilities of the HQ-12/KS-1 series. The FT-2000 is a derivative which is fitted with an anti-radiation seeker and intended for engagements against AEW&C/AWACS and stand-off jamming aircraft. The HQ-9 is supported by the HT-233 phased array engagement radar, like the H-200 modelled on the MPQ-53 and 30N6E designs, carried on a Taian TAS5501 series 10 x 10 high mobility vehicle, common to the HQ-9 TEL and similar in design to the S-400's BAZ-6900 series vehicle. Chinese sources claim C-band operation with 300 MHz receiver/antenna bandwidth, detection and tracking range of 150/100 km, and monopulse angle tracking to resist jamming. The design bears considerable similarity to the 30N6E series, especially in the antenna design. Recently disclosed imagery shows the use of the self-propelled Type 305A, Type 305B and Type 120 radars as the battery acquisition radar component. The designation FD-2000 is for export configurations of the HQ-9. Instalation: ------------------------------------------------------------- Put the content of the objects/ folder in your mod folder. Crédits : -------------------------------------------------------------- 3d Model, textures, INI files: angelp This addon is and will in all cases remain freeware, and is only allowed to be available here in Combat Ace Released under Combat Ace Fair-Use terms

--------------- Spitfire for CombatAce --------------- SF2 version 2021 TurboSquid : original 3D model Snapper21 : source file donated to CA Wrench : project development origin, inis and decals. Starfighter2 : original Spitfire Mk9 cockpit Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis. Cliff7600 : textures editing, decals and inis, cockpit editing. Thirdwire : textures and inis. These are the models made for CombatAce from the original TurboSquid 3D source file. It is made to be downloaded for free at CombatAce site only, and not to be used in any other way. The models have been designed for a SF2 / ThirdWire use and nothing else. Not to be merged with other files sharing the same original 3D model. - Spitfire Mk5c Trop - Spitfire Mk5c Trop 4 cannons Note : Turkish and Egyptian decals folders are common to both Mk5bT and Mk5cT models.

--------------- Spitfire for CombatAce --------------- SF2 version 2021 TurboSquid : original 3D model Snapper21 : source file donated to CA Wrench : project development origin and inis Starfighter2 : original Spitfire Mk9 cockpit Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis. Cliff7600 : textures editing, decals and inis, cockpit editing. Thirdwire : textures and inis. These are the models made for CombatAce from the original TurboSquid 3D source file. It is made to be downloaded for free at CombatAce site only, and not to be used in any other way. The models have been designed for a SF2 / ThirdWire use and nothing else. Not to be merged with other files sharing the same original 3D model. - Spitfire Mk5b Trop - Spitfire Mk5b Trop w Aboukir filter Note : Turkish and Egyptian decals folders are common to both Mk5bT and Mk5cT models.

--------------- Spitfire for CombatAce --------------- This is a What-if skin for the Spitfire LF Mk5b available in the "Spitfire LF Mk5 b/c (2021)" add-on aircraft pack : https://combatace.com/files/file/17780-spitfire-lf-mk5-bc-2021/ This model was made for the CombatAce site. It cannot be used anywhere else and cannot be part of any payware. Only to be released at CombatAce site, following the "Freeware Licensing" rules of agreement : https://combatace.com/forums/topic/95800-freeware-licensing/ ----------------------------------------------------- Credits go to : TurboSquid : original 3D model template Snapper21 : source file donated to CA Wrench : project development origin and inis Logan4 : additionnal 3D work, textures editing Cliff7600 : textures editing, decals and inis Thirdwire : texture ----------------------------------------------------- This skin depict a "what-if" Spitfire LF Mk5b of the Finnish air force, in post WW2 service.

--------------- Spitfire for CombatAce --------------- SF2 version 2021 TurboSquid : original 3D model Snapper21 : source file donated to CA Wrench : project development origin and inis Starfighter2 : original Spitfire Mk9 cockpit Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis. Cliff7600 : textures editing, decals and inis, cockpit editing. Thirdwire : textures and inis. These are the models made for CombatAce from the original TurboSquid 3D source file. It is made to be downloaded for free at CombatAce site only, and not to be used in any other way. The models have been designed for a SF2 / ThirdWire use and nothing else. Not to be merged with other files sharing the same original 3D model. - Spitfire Mk1 (early) - Spitfire Mk1a - Spitfire Mk1b - Spitfire Mk2a - Spitfire Mk2a Long Range - Spitfire Mk2b

This is my C-130 Hercules Superpack add on pack #2. Please read the readme file (included) for installation instructions and credits. This requires my C-130 Hercules Superpack already installed to run properly. Visit here to download it: C-130 Hercules Superpack Dels

The Avro Shackleton is a British long-range maritime patrol aircraft (MPA) which was used by the Royal Air Force (RAF) and the South African Air Force (SAAF). It was developed by Avro from the Avro Lincoln bomber, which itself had been a development of the famous wartime Avro Lancaster bomber. Credits: Veltro2k: 3d model Wrench:for skins, decals and ini work Engine sound stolen from someplace Bombsight mod (used only on MK.2) by Crusader Spinners: Decals

This is a "stand-in" Seafire FR Mk. 47 modded from Thirdwire's Spitfire Mk. 24. The skin in is .jpg format and 512 x 512 resolution. It includes a new SPITFIRE24_PROP_SLOW.TGA showing 5-blade propeller instead of the stock 4-blade prop. Also included is Stary's late mark Spitfire cockpit. You will need the DLC #29 to get the late marks Spitfires before you install this mod. Thanks to Thirdwire for the original Spitfire 3-D model. Have fun! A. Mariani

Rafael Advanced Defense Systems (RADS) SPYDER-SR The SPYDER (Surface-to-air PYthon and DERby) is an Israeli short and medium range mobile air defense system developed by Rafael Advanced Defense Systems with assistance from Israel Aerospace Industries (IAI) The SPYDER is a low-level, quick-reaction surface-to-air missile system capable of engaging aircraft, helicopters, unmanned air vehicles, drones, and precision-guided munitions. It provides air defense for fixed assets and for point and area defense for mobile forces in combat areas.The SPYDER launcher is designed to fire Python-5 and Derby surface-to-air missiles which share full commonality with the air-to-air missiles This model uses an Electro-Optical turret for target acquisition with a maximum range of 15 km for the Pyhton 5 missile and 40 for the DERBY. Instalation: ------------------------------------------------------------- Put the content of the objects/groundobject/SpyderSR_L folder in your mod folder. The game must replace with this system older AAA systems, so be aware. Also, you need to have the Python5 and Derby missiles from Ravenclaw_007 WeaponPack in the Objects/Weapons folder. You could find them here https://combatace.com/files/file/13929-weapons-pack-2/ Crédits : -------------------------------------------------------------- 3d Model: angelp Python5 and Derby Missiles: Ravenclaw_007 This addon is and will in all cases remain freeware, and is only allowed to be available here in Combat Ace Released under Combat Ace Fair-Use terms

Sea Venom FAW.53 - Australian designation for the Sea Venom FAW.21. Thirty-nine Sea Venom FAW.53s saw service with the Royal Australian Navy (RAN), replacing the Hawker Sea Fury. The Sea Venom entered service in 1956 and, during its service with the RAN, operated off the aircraft carrier HMAS Melbourne. It was taken out of first-line service in 1967, replaced by the American McDonnell Douglas A-4G Skyhawk. WHAT's IN: 1 new plane 6 skins decals, weapons, pilots CREDITS: - Veltro2k model - Baffmeister FM - Spillone104 sound, inis tweakings, testings - Stary pit - Wrench original templates, hangar templates - paulopanz skins, decals, screens INSTALL: - put all in your mod folder OPTIONAL: - hangars 1024 x 726 Enjoy @paulopanz

This is updated version of Mig-15 cockpit This package is preset to be used with stock Thirdwire Mig-15 bis. "Expansion Pack I" required for Mig-15 several things changed in version 2.0 among them: stick added pedals added corrected gunsight a bit slightly adjusted, smoother canopy framing new slightly better and higher resolution textures for baked materials more real-size lamps other tweaks here and there original mod description: Credits: TK,Thirdwire CrazyHorseB34 -betatesting Crusader, Ravenclaw_007,RussoUK, Zurawski -for max examples and help on the way Mod description: This is simplified Mig-15/Mig-15Bis cockpit. Very similar to non-radar equiped Mig-17 one. Please note there are some issues with some instruments despite my battling with the ini horror -feel free to tweak and share!