Just a quick errata sheet for the USMC Skyraider skins I released last month, I just noticed a glaring error, ie I had misnumbered the decals in the decal.ini on 3 of the skins I uploaded that is for VMA212 - 251 - 333 causing the tail numbers to be errr rather truncated on the right side of the fin.....ooops !! 
So, here are the 3 corrected decal.ini's for the relevant skins, just rename them ie just delete the names I have put on them for reference, and rename EACH one "Decals" and drop them into the relevant skin folder and allow it to over write the existing decal.ini file if you didnt delete it first of course, oh yes, I had also forgotten to enable the prop decals on those 3 skins so that has been rectified as well.
Totally my bad here, I shall be having strong words with my quality control department , apologies for the error , silly me !!   

This is another rework of the available A-1H  Skyraider skins, this time for USMC A-1's same details as the previous upload for the USN versions. 3 of which are generic USMC airframes, the bu numbers etc are also generic as not many A1's were in use with the Marines in Vietnam as most of the squadrons had re equipped with A4's by then.
 
included are 
VMA 212 generic
VMA 225
VMA 251 generic
VMA 331
VMA 333
the reworked data.ini to stop the clipping issue
Decals
All the Sounds needed
weapons 
Pilot ( a different one from the USN one )
lo res screens if you need them
as with the previous skins I have re-enabled the wingfold system,and the canopy so the usual shift-9 for the wings and shift-0 for the canopy
 
Enjoy, fly safe, and give 'em hell.

This is a rework of the available A-1H  Skyraider skins, the project started when I noticed there was a clipping issue on the original user made skins, after the stock aircraft had been made flyable etc. being an OCD sufferer I couldn't live with it, so I had to comb the DATA.INI of the aircraft to find the issue, which I never didi, probably one number out of place , or something of that nature. So I re did the whole data file, using a frankenstien of a couple of the available ones, mainly Wrench's , so worry ye not good campers, very little has been altered, so the A/C still operates as Wrench intended, just NO CLIPPING !!! ................YAY !! RESULT !! HAPPY BLOODY DANCE !! ......
 
Anyhow, I then went on to re do all the skins, utilising the templates from bot Wrench, and Nyghtfall, so a mix and match of those as well, I hope you like and enjoy the results !!
Included are 
VA-35
VA-52 ( two versions, one dirty one clean , the clean one has new decals for the squadron markings made by me )
VA-65 (Early version )
VA-65 ( USS Enterprise )
VA-85
VA-105 ( A really shiny pristine skin ) 
VA-176 (USS Shangri La )
VA-176 (USS Intrepid)
the reworked data.ini to stop the clipping issue
Decals ( of course....no use without 'em as I have altered theDECAL.INI of all the skins , 'cos I like to make trouble harharhar )
All the Sounds needed
Finally the weapons ie drop tanks and the bog bomb, and the Pilot I myself use for this aircraft, oh yes and all the screens, both in hi res, and lo res if you need lo res screens for any reason. 
One final note, on the  VA-176 ( Intrepid ) skin, two of the aircraft have kill markings, I have put the entry to enable those in the DECAL.INI of that particular aircraft, however I have them disabled, as in reality the Bu Numbers of the skins and the Actual aircraft are not the same, and I couldnt be bothered to make the correct bu numbers for thos 2 particular aircraft, however if you do not have OCD, and you want the marking showing ( they are keyed to the correct nose numbers ) the just remove the hash marks in the DECAL.INI
[Decal019]
MeshName=Fuselage
DecalLevel=2
DecalFacing=LEFT
//FilenameFormat=A-1H/VA176a/D/kills    <<<<<<<<<<<<<<<<<<<<<<<<< THAT THERE !!! 
Position=-0.70,0.70
Scale=0.55
DecalMaxLOD=3
Thats about it, please enjoy, and please leave feedback if you like...........................cheers !! 
 
OH yes, I forgot one last thing, I have re-enabled the wingfold system, , yes , yes I know its not perfect, as it leaves the stores hanging in a weightless environment, but hey ho, if ya dont like it, eith re disable it or , simply ignore it !! so canopy opens with SHIFT-0 and the wingfold is SHIFT-9.

2 Skins for Erikgen's Superb RF-101 Voodoo.
 
Please read the readme.

SF2 A-4 Skyhawk "Southland Scooters" Skin/Decals Pack              3/2/2018
= For SF2 (Any & All, Full-5 Merged Prefered) =
*Can be used in any install that has access to the A-4C_65 & A-4F*
2 new skins for a couple of the stock 3W Skyhawks. These represent "local" A-4 units from
Southern California; my home turf! :) They are either Reserve Squadron (VA-305) or a Service,
Support, Training Unit (VC-7).
Also included for the A-4F, are a modified Data and loadout inis, correcting/adding to the
Mission tasking loadouts.  Several new parts are included that correct and add the missing outer
Sidewinder rails. Both aircraft get the Player operated manual canopy, and landing light. 
The skins included are for:
A-4C_65:
VA-305 "Lobos" based at NAS (now JFB) Los Alamitos *-see notes-*
A-4F:
VC-7 "Tallyhoers" (or Redtails) based at NAS Miramar

Skins are brand new, from Nyghtfall's templates, and are in jpg format. Most markings are
decals, excepting certain squadron tags on the tail fin & rudder (VC-7 and/or fuselage bands
(VA-305).  These had to be painted on due to number-of-decals-per-mesh restrictions. All BuNums
are historiclly correct for aircraft used by both squardrons; unfortunately, they could not all
be matched to their corresponding Modex. On the Loadout screen's individual aircraft dropdown
listing, those marked with a star (*) are matched.
Also added, via Magical Ini Dancing (tm) are missile rails for the OUTBOARD pylons on the A-4F,
as is correct for all 5-hardpointed Skyhawks. These are added via the loadout ini through
various jiggery-pokery and at great expense. They are only used in the "Air-to-Air" tasking (and
Recon), and will/do not effect any Strike, CAS, Auntie-Ship or other attack missions.
These modification can also be added, using the same data ini edits, to all the A-4E and later
models. With some luck, they will =NOT= interfere with any of the Skyhawks released by
Nyghtfall. If in doubt, back up your original data and loadout inis before installing.
The canopy uses the Standard Animation Keystroke (tm), Shift/0.
When on the Loadout screen, for skin/squadron selection, on the Dropdown menu you'll see
A-4C_65:
VA-305 Lobos (NAS Los Alamitos 70/71)
A-4F:
VC-7 Redtails (NAS Miramar 1973-80)
As always, fairly easy to follow, detailed install instructions are included. So, please read
them .... Also, DO give the Notes section a read as well, for enlightenments, illuminations, and
general ramblings. With MANY thanks to Nyghtfall for his invaluable assistance!!! :)
Happy Landings!
Wrench
Kevin Stein
 

These skins represent the VAW-116 squadron of the United States Navy.
The serials numbers are some i could find that really were within this squadron past and present.

You will get the following skins in this package :
- 1991
- 2006
- 2011
- 2014
- 2015
Same instructions as usual:
Copy the E-2C aircraft folder content to your game E-2C aircraft folder.
Copy the E-2C decals folder content to your game E-2C decals folder.
Open the E-2C.ini and edit the file by adding the lines from the E-2C.ini in this file (replace the XXX by number in sequence). 
Credits:
Thanks to Thirdwire for creating the Strike Fighters series.
Thanks to paulopanz for providing the E-2C model.
Thanks to pappychksix for providing the wonderful E-2C Hi-Rez Skins.
Myself for the decals (all done by me).
Happy flights!
Mario C.
Frenchie1977

SF2NA A-6E (TRAM) Intruder, VA-34,VA-55,VA-85 Early Lo-Viz Skin/Decals Pack    2/15/2018
= For SF2 (Any & All, Full-5 Merged Prefered) =
*Can be used in any install that has access to the A-6E_79 (aka: TRAM)*
3 new skins for the 3W A-6E_79 Intruder that depict the 3 squadrons that participated in the
"Freedom of Navigation" exercises in the Gulf of Sidra during 1986, and subsequent strikes
against various Libyan targets (El Dorado Canyon).
All markings are decals, and decal randomization is TRUE.  All serial (BuAerNums) are correct as they
are for the A-6E, but should be considered Generic (tm) in nature, not representing specific
aircraft in any particular squadron. In fact, all 3 skins use them as a 'pool' of decals. 
The Default Start Date switch is used on this skin, so in 1983, you should see only these. The
skin maps are new; The aircraft is finished in the 2-tone Compass Ghost Grey over Medium Grey
scheme, with subdued markings (black and light grey). The skins are in jpg format.
The aircraft are:
VA-34 Blue Blasters, USS AMERICA 
VA-55 Warhorses, USS CORAL SEA
VA-85 Black Falcons, USS SARATOGA 
As these are 'stock' squadrons in the 3rd Wire listing, Level=1 decals are used to activate the
squadron name display. This should make it easy for campaign builders to use them in user-made
campaigns or single missions (like on Menrva's new Libyan terrain).
Please note, =NOTHING= is included that makes the aircraft flyable; no inis, cockpit parts (I
use the Razbam payware pit on my A-6E & A-6E TRAMs). You should have made them flyable or need
to seek the "parts" on your own. 
Also, if you have made it flyable, and use the "Read Only" trick on the main ini (A-6E_79.ini),
you'll have to un-read only it to add this skin.
While specificly designed for the A-6E_79, this mod =should= be compatible with the A-6 Intruder
MegaPack by Homefries; the skins use unique squadron named folders and should not conflict or
interfere with it (even though said squadrons also exist in his pack, as Level=1 statments,
selectable from the Squadron Dropdown on the Loadout screen). Please note the "1983" start date
is an arbitrary year, based on my research as a "best guess".
On the Loadout Screen, for skin selection you'll see:
VA-34 Blue Blasters (2-Tone 1983)
VA-55 Warhorses (2-Tone 1983)
VA-85 Black Falcons (2-Tone 1983)
As always, fairly easy to follow, detailed install instructions are included. So, please read
them .... 
Happy Landings!
Wrench
Kevin Stein
 

SF2 A-4B Skyhawk VA-95 Det Q Skin/Decals Pack              2/15/2018
= For SF2 (Any & All, Full-5 Merged Prefered) =
*Can be used in any install that has access to the A-4B*
A new skin for the A-4B Skyhawk. Also included, are a modified Data and loadout inis, correcting/adding to the Mission tasking loadouts, Player operated manual canopy, and the landing light.
The skin included is for:
VA-95, Det.Q
embarked aboard USS BENNINGTON (CVS-20) circa 1964/64, in the Western Pacific
When in-game, on the skin selection dropdown panel, you'll see:
VA-95 Det Q (CVS-20,1964)
Skins remain in their "as issued via 3W" stock bmp format. Most markings are decals, excepting certain color tags or other markings on the rudder   These had to be painted on due to number-of-decals-per-mesh restrictions. There are 10 Modex and serial numbers (BuNums). All BuAerNums ARE historiclly correct; but not all could be matched to their corresponding Modex. 
 
Historically speaking, these A-4 squadrons (and/or detachments) were assigned to the Essex class carriers that had been convered to "CVS" or anti-submarine warfare carriers. The Skyhawks embarked were not only tasked with light strike, but Combat Air Patrols to protect the ship and the ASW assets.
The canopy uses the Standard Animation Keystroke (tm), Shift/0.
When in-game, on the skin selection dropdown panel, you'll see:
VA-93 Det Q (CVS-20,1964)
As always, fairly easy to follow, detailed install instructions are included. So, please read them .... 
Happy Landings!
Wrench
Kevin Stein