Jump to content

Leaderboard


Popular Content

Showing most liked content on 02/03/2024 in Posts

  1. 9 points
  2. 6 points
  3. 6 points
  4. 4 points
    Old WOI mod by Fast Cargo... runs in SF2 !
  5. 4 points
  6. 4 points
  7. 3 points
    Douglas Skyraider FB.3 - No.6 Squadron, RAF Near East Air Force, 1967
  8. 3 points
  9. 2 points
    Recently I had an opportunity to re-install FlightGear (stable ver. 2020.3.19) on my 2013 Mac Pro and was pleasantly surprised - with no crashes, decent FPS for the most part, and various other improvements that were incorporated over the years. I had dabbled briefly in FlightGear a couple of times before (around 2013, and again around 2020) - but eventually removed the flight simulator from my hard drive on both of those occasions. Since my particular setup(s) are with dual AMD video cards, I thought I would post some (illustrative) tips below, as well as representative pics of the sim when at best, or very good, settings. I will this time around keep FlightGear on my hard drive - makes for a good, free flight simulator. For command line entries and tips that should be plugged into the "Additional Settings" option of FlightGear, see the info. immediately below. Make sure to remove the info. included in brackets if copying the commands into the relevant settings section. ----- --prop:/sim/gui/current-style=0 (better GUI style for AMD cards) --prop:input/mice/mouse/mode/button[2]/binding/value=2 (gets rid of horrible mouse-as-yoke feature that sometimes automatically turns on) --prop:/sim/rendering/photoscenery/enabled=true (gives more photo-realistic scenery whenever possible; to be fully implemented in later FG versions) --prop:/sim/rendering/hdr/envmap/update-continuously=false (disables continuous siphoning and updating of terrains, to enable seconds command below) --prop:/sim/rendering/hdr/envmap/update-rate=5 (terrain refresh rate set in seconds; good values are 5 or 10, for minimal stuttering) --prop:/sim/rendering/max-paged-lod=1300 (stock max paged LOD no. is "200"; recommended is not to exceed about "1900" on AMD) --prop:/sim/rendering/plod-minimum-expiry-time-secs=60 (stock min expiry time is "180" secs.) --prop:/sim/rendering/multithreading-mode=DrawThreadPerContext (should improve multithreading capacity, at least slightly, and add a few extra FPS) --prop:/sim/rendering/database-pager/threads=12 (stock thread rendering no. is "4," with more threads improving ave. FPS; set as per your CPU threads no.) --prop:/sim/rendering/vsync-enable=false (force disables vsync to improve FPS) --prop:/sim/rendering/multi-sample-buffers=true (this is anti-aliasing; set to false to disable and remove entry immediately below it) --prop:/sim/rendering/multi-samples=2 (anti-aliasing value; lowest is 2, also good is 4; avoid 3) --compositor=Compositor/HDR/hdr (modern rendering pipeline for better graphics details and shaders; rarely breaks scenery; still mostly experimental on AMD vid. cards) --units-meters --disable-splash-screen --disable-horizon-effect --enable-distance-attenuation --enable-specular-highlight --enable-clouds3d --fog-nicest ("nicest" improves look of fog with more subtleties while "fastest" makes fog appear and disappear more quickly; no real impact on AMD FPS) --shading-flat ("smooth" apparently improves look or depth of shaders; preference is for "flat" since I have not noticed difference in quality on AMD) --texture-filtering=2 (this is anisotropic value; lowest is 1; also good is 4 or 2; avoid 3) --bpp=32 (can also use 24 but have not noticed an FPS improvement with 24; would say 32 is better for FPS overall) --terrain-engine=pagedLOD --lod-levels=3 2 5 3 1 (also good is 4 3 6 4 2 for best visual quality on AMD but still mostly FPS-friendly; recommended is 3 2 5 3 1 for balance between visual quality and solid FPS) --lod-res=2 (default is 1; also good is 3; avoid any other values besides 2) --lod-texturing=raster (better than "bluemarble" as far as I have been able to test, with smoother loading of textures) --lod-range-mult=3 (default is 2; also good is 1; avoid all other values besides 3) --enable-texture-cache ----- On a broader note, it's important to tweak the rendering, shaders, and LOD range settings in FlightGear - to get the best experience on your AMD video rigs (be it a dual or single AMD setup). The frequencies, by the way, on my dual FireProD700s have been OC-ed, via MSI Afterburner, from a clock/memory of 850/1370 to 1024/1380 MHz. Be sensible with the rendering options - particularly with the maximum number of scenery and aircraft tiles - anything above a value of 1900 or so is both useless and an FPS hit. (The scenery/aircraft tiles no. may also be set via the relevant command line entry indicated above in this post.) Take note as well of cloud density and visibility values. Anything beyond a visibility of 35 km or so is questionable since it does not widen further the cloud carpet but is, once again, an FPS hit. Pic 1 - Sensible/Best Rendering Choices for AMD Video (in FlightGear) Next we look at the shader options that also require careful thinking and tweaking. Take note that "landmass," "urban," also "water" - give different visuals if they are set to the maximum level (of five). I personally prefer how the landscape/terrains look with those three settings at a value of four - with crisper graphics - but tweak according to taste. Also worth noting is that I always run the LOD value on my rig(s) at "-1," via the excellent little program "ATISetLod" that is available under the top post of this thread. Pic 2 - Sensible/Best Shader Options for AMD Video (for crisp and fairly realistic graphics) Also important is to tweak the LOD range settings to get a good balance between visual quality and decent FPS, with no stuttering or crashes. Focus in particular on the maximum distances for the detailed, rough and bare scenery ranges - I decided eventually on cutoffs of 3, 17.5 and nearly 45 km. Other cutoffs worth considering are 2.5, 15, and 40 (or so) km, as well as 3.5, 20, and 50 km. Anything beyond the latter values will, again, most likely not make much of a difference with the visuals but will contribute a noticeable FPS hit. Take note also of the "high detail" and "AI/MP interior" values. I'm getting good results with values of 250 - 260 pixels for those options; also good are values of 300 (or so) pixels. Those two values may be tweaked to taste, for the most part - but, again, be sensible since they may impact on FPS. Pic 3 - Sensible/Best LOD Range Values for AMD Video Last, let's not forget to tweak our custom FlightGear profile (in our AMD settings panel) as best we can, to minimize stuttering, pausing, or crashes. Take note in particular how the shader cache is set to "On," not to "AMD Optimized," and how, even though I have enabled CrossFire mode, frame pacing is set to "Off" (which eradicates stutters on my rig in FlightGear - had tried with frame pacing "On" and was not pleased with the results). If you have only a single AMD video card, experiment with leaving the CrossFire option on (set to "AFR compatible"), or turning it off entirely. (NOTE: I have not noticed any FPS downgrade with anti-aliasing set to 4EQ and edge-detect, anisotropic value at 8, and tessellation at 16. Tweak to taste obviously.) Pic 4 - Good AMD Settings for a Custom FlightGear Profile Recommended also, if having any instability with FlightGear on AMD video, is to stick with the "Pro" variant DLLs (drivers) for AMD, instead of the consumer/Adrenalin ones. I particularly like the ver. 19.x.x Pro series of drivers, as well as the venerable ver. 17.x.x ones (the latter of which I have installed on the 2013 Mac Pro). To find links to the Pro 19.Q3 DLLs (the last version of the Pro DLLs to support CrossFire, by the way), see this page. Below follow several representative pics with the settings illustrated above applied - FlightGear provides a nice selection of aircraft with usually very good monoplane FMs, especially for tricycle-gear (small) civilian aircraft such as Cessnas, also for airliners like the (classic) Boeing 707. For multi-wing contraptions on the other hand and more realistic/historical FMs for biplanes, triplanes, and the odd multiplane, the gold standard(s) remain heavily-modded First Eagles 2 and RoF, as well as recent iterations (UE edition onwards) of the excellent WoFF series. Happy flying, Von S
  10. 2 points
    Coming back from a night escort mission
  11. 2 points
    I think so. Tried it some time ago, but making LODs manually is more controlable ;-)
  12. 2 points
  13. 1 point
    Always nice to see FlightGear mentioned here on this site. I'm a big fan of this open source flight simulator and I already tried to combine my love for the Thirdwire sims with my love for FlightGear: https://combatace.com/forums/topic/93840-strike-fighters-2-meets-flightgear/. I'm still working on and off on a tool that in the end should be able to automatically convert SF2 (and FE2) aircraft into FlighGear aircraft (with a JSBSim flight model).
  14. 1 point
    oh dont give 'im ideas, he will steal my thunder hahahahahaha.
  15. 1 point
  16. 1 point
  17. 1 point
  18. 1 point
  19. 1 point
    A Pukin' Dog over the North Atlantic (with slightly corrected tail decals).
  20. 1 point
  21. 1 point
    A little bit wounded, but made it safely back to the base.
  22. 1 point
  23. 1 point
  24. 1 point
    The escort fighters saving my butt on the way home............


×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..