Strike Fighters by Thirdwire
Sub Category
All SF / WOV / WOE / WOI Simulation Modifications and Add-Ons
SUBCATEGORIES
-
'What if' Delta Dart F.1 (F-106A) Royal Air Force Skin pack
By dtmdragon
'What if' Delta Dart F.1 (F-106A) Royal Air Force Skin pack
Decal are all stock TW Lightning decals so you can change the squadron to any RAF Lightning Squadron and the correct markings should show.
- 1 Polished Silver Skin
- 1 All Over Green Skin
- 1 Two Tone Air Defense Grey
You MUST have the SF2 F-106A pack installed:
http://combatace.com/files/file/14246-f-106a-delta-dart-for-sf2/
You MUST have a SF2 Title installed with a Lighning e.g. SF2 Expansion Pack 2
Credits:
- Pasko and his team that did the F-106A above.
- Geary for the F-106A templates.
Enjoy!
Dan (Dtmdragon)
35 downloads
(2 reviews)0 comments
Updated
-
AIM-9JULI
This is the AIM-9JULI version.
it's based on a photo of an A-7E(H) in a magazine.
I 've seen other photos of "JULI's" on the internet, and are not all the same.
Possibly depending on which model are based, JULIs differ a bit.
ALL CREDITS to ravenclaw_007 on which the LOD/Skin is taken from.
v1.2
New ACCURATE Lod and skin made by ravenclaw_007!
Thank you much for your amazing work!
(Note - Photo still of the old version, it will be updated soon)
97 downloads
(2 reviews)0 comments
Updated
-
SF2 1950s USMC AD-6 (A-1H) Skyraider Skin Pack
By Wrench
SF2 1950s USMC AD-6 (A-1H) Skyraider Skin Pack 12/13/2015
= For SF2 (or Any & All =at= Full- Merged) =
*Note: must have SF2:V as part of your merged install to access the A-1H aircraft itself.*
The package represents USMC AD-6 (A-1H) Skyraider squadrons of the mid-1950s. Included in this set are skins for:
VMA-212
VMA-333
VMA-225*
VMA-251*
*Note: In Real Life service, these 2 squadron used AD-4B (and AD-5) aircraft, but as there is little difference between the marks, for gaming purposes, are used with the AD-6/A-1H. (they =CAN= be added to the "SF2 AD-4B Skyraider, KAW Era" mod here at CA, but you'll have the blue drop tanks on your grey/white skins, but that DID happen in Real Life. Or one can hand-load the 'white' drop tanks.)
All aircraft use a pool of modex and BuNums, with individual air group letters. In this respect, they should be considered "generic" in nature. All markings, excepting special squadron paint schemes (VMA-225 only) are decals. All skin maps are in jpg format. Decal randomizaion is TRUE. For those squadrons that are listed in the stock 3w "squadronlist.ini", a decal is used to activate the squadron name display on the loadout screen.
Reminder: nothing is included herein that makes them Player Flyable. There is a superb cockpit by Dels you should have already! If you don't, what ARE you waiting for?? :)
As always, fairly easy to follow, detailed install instructions are included. So, please read them ....
Happy Hunting!
Wrench
Kevin Stein
87 downloads
(2 reviews)0 comments
Submitted
-
SF NAA F-8 Super fury
By KnightWolf45
This his North American ´s Proposal for OS-130 that led to the F-8 Crusader
The NAA F-8 Super Fury
FM his just copy paste has usal
F-86L Cockpit by Zur or Bunyap not sure any credit goes to Saber team
all weapons are on Gunny weapons pack
model ini edits skins and decals by me Cocas
to install just drop the your on you savegames etc StrikeFighters folder
enjoy
Xmas gift included!
PSD templets included
Cocas
Released un CA Fair terms agreement.
248 downloads
(4 reviews)0 comments
Submitted
-
SF2 WW2 SAAF Fury - East Africa
By LloydNB
Hawker Fury MkII
SAAF No.2 Squadron
For use with the A-Team Fury MkII. Some elements of Charles' original skin have been retained.
The Hawker Fury was still in service with the South African Air Force at the start of WWII. Due to aircraft shortages, the Fury was used in mixed squadrons during 1940 in East Africa. As it was too slow to catch the more modern Italian aircraft, the Fury was mainly used in the close support role.
51 downloads
(0 reviews)0 comments
Submitted
-
[Fictional] North American F2J-1A Super Fury 'Blue Angels'
By Spinners
North American F2J-1A Super Fury for STRIKE FIGHTERS 2
This is a very simple mod of Cocas' recent Super Fury to represent the F2J-1A as it might have appeared in service with the 'Blue Angels' aerobatic display team.
INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the F2J-1A folder into your main Aircraft folder.
2. From the DECALS folder drag and drop the F2J-1A folder into your main Decals folder.
3. From the PILOTS folder drag and drop the PILOT_BA folder into your main Pilots folder.
CREDITS
Thanks to Cocas for bringing us another 'what if' paper project. I love them!
As always, thanks to Third Wire for a great little game/sim and for the 'Blue Angels' number decals.
Regards
Spinners
Version 1 - 23/12/15
85 downloads
(3 reviews)0 comments
Submitted
-
AV-8B DropTanks in HD
By 331Killerbee
DropTanks for the AV-8B HD Series by 331KillerBee
ReadMe Included
AV-8B Drop Tanks for 331KillerBee's HD Skins to be used on all Versions of the AV-8B.
Done in accordance by a Guy that used to load them.....
Creadits: Bobrock for the Original AV-8B Series.
* Note: To be used with SF2 Series Installs. Not tested with SF1 Series.
Semper Fi!
331KillerBee
145 downloads
(4 reviews)0 comments
Updated
-
TU-104 Camel
By Veltro2k
Tu-104
The Tupolev Tu-104 (NATO reporting name: Camel) was a twin-engined medium-range narrow-body turbojet-powered Soviet airliner and the world's first successful jet airliner. Although it was the sixth jet airliner to fly (following, in order, the British Vickers Type 618 Nene-Viking, de Havilland Comet , Canadian Avro Canada C102 Jetliner, US Boeing 367-80 and French Sud Caravelle), the Tu-104 was the second to enter regular service (with Aeroflot) and the first to provide a sustained and successful service (the Comet which had entered service in 1952, was withdrawn from 1954-1958 following a series of crashes due to structural failure). The Tu-104 was the sole jetliner operating in the world between 1956 and 1958.
Made mostly for eye candy ( Rivet counters beware):P
Model: Veltro2k
Cockpit: Kesselbrut
install in Objects/aircraft folder
THIS MODEL IS ONLY TO BE DISTRIBUTED AS FREEWARE AND IN NO OTHER CIRCUMSTANCE SHALL IT BE USED, EVEN IN PART OF ANYTHING THAT IS PAYWARE.
IN ACCORDANCE WITH THE COMBAT ACE MODDERS AGREEMENT
291 downloads
(5 reviews)0 comments
Updated
-
SF2 WW2 ETO Bristol Beaufighter Mk.VIF (Late), v.9 by Cocas
By Wrench
SF2 WW2 ETO Bristol Beaufighter Mk.VIF (Late), v.9 by Cocas 12/28/2015
-- Something for the WW2 ETO players --
= For SF2, Full-5 Merged (Reccomended/Preferred) =
*This mod will =NOT= work in SF/Wo* 1stGen game installs, at any patch level. It was built for SF2 ONLY!!.*
*Note x2: This mod represents the late production Beau Mk.VIFs for ETO and MTO** usage ONLY! Seperate versions for other theatres, and the later marks, will be released when and as they are finshed.
We are calling this "version 0.9", as there exists the possibility of more work being required. But, we wanted to get them out into the hands of our WW2 End Users for their examination, flying pleasures and so forth.*
**= will require new squadron code and/or individual aircraft letter decals. But the paint scheme is the same for MTO usage. However, SEAC is completely different, and will require the release of a "theatre specific" version.
This is a BRAND NEW aircraft, brought to you by Cocas Aircraft Factory & Co. This package contains 1 aircraft, representing the Beaufighter VIF fighter/intruder variant.
This version =HAS= the dihedral horizontial stabs (they point up), the rear swivel MG mount, and the "thimble nose" AI/ASV type radar. The aircraft IS equipped to carry rockets as well as 2 bombs on the wing stations - but, obviously! not all at the same time!! Torpedo capability has been removed for this "Fighter/Intruder" version.
This pack contains the following aircraft & skin/decal sets:
Beaufighter Mk.V1F (late) Standard Day Scheme (Overall MSG/Dark Green disruptive)
No. 604 Squadron "County of Middlesex"
The Squadron Crest is used as the paint chip seen on the Loadout Screen.
Skins are in jpg format, as are the bump maps. Everything is included (weapons, pilot figures, sounds, etc), excepting the guns (you should have all these already).
All markings are decals, and decal randomization is set to TRUE. Other squadrons can easily be reproduced by creating new squadon code letters (either for ETO or MTO usage). As is my habit, a sample bmp is left in the Decals folder so you can match the font and size.
All serials, while correct for the variant depicted, should be considered 'generic' in nature, as they represent no specific aircraft with the unit(s) represented.
When in-game, you'll see:
Beaufighter Mk.VIF (Thimble) (CAF)
on the aircraft selection drop-down for this aircraft. The "CAF" (for Cocas Aircraft Factory) will diferentiate these Beaus from any others you may or may not have. It =IS= designed to replace any other Beaus of this type you may or may not have, from "other sources". The "thimble", of course, means this is the thimble-nosed radar equipped version (AI Mk.VIII).
As always, fairly easy to follow, yet detailed install instructions are included. So, please =READ= them BEFORE installing this mod!!!. Also, give the "Notes" section a read too.
Happy Hunting!
Wrench
Kevin Stein
- for Cocas Aircraft Factory -
160 downloads
(3 reviews)0 comments
Submitted
-
Fouga Magister BAF
By paulopanz
The Belgian Air Force operated 50 Magisters as primary trainers.
The aerobatic team The Red Devils also used them as display aircraft.
A small number of Magisters remained in use until September 2007,
as flight maintenance aircraft for senior officers.
The Belgian Air Force was the last country that used Magisters for full duty.
What's in:
- A new plane;
- 3 skins (1 Silver and 2 Rode Duivels Acro with different underwings);
- Historical decalsets;
- Open canopy 10 key auto closing at take off;
- Weapons
- "real" sound;
- Screens;
- Loadout.tga;
Credits
- Veltro2K - plane model;
- Stary - Pit
- Baffmeister - Final Data.ini and proper FM;
- Paulopanz -Templates, Rode Duivels skins, decals;
- Coupi - Silver Skin and testings;
- Spillone104 - sound;
Install:
- all mod folder content in your mod install
- overwrite
That's all
Enjoy
@ paulopanz
267 downloads
(4 reviews)0 comments
Submitted
-
TSF Saab 18 Flygvapnet Package
By JonathanRL
Saab 18
by The Scandinavian Front & Friends.
The SAAB 18 was a twin-engine bomber and reconnaissance aircraft, designed and built for use by the Swedish Air Force by Svenska Aeroplan AB (SAAB)
in response to a 1938 design competition. Due to delays, it did not enter service until 1944, but quickly became the standard Swedish bomber aircraft.
Serving in the bomber, reconnaissance and ground-attack roles, it also assisted in the development of ejection seats and air-to-surface guided
missiles until its replacement by the Saab Lansen in the late 1950s.
This package contains two Flyable Aircraft.
Saab B 18B
An upgraded version of the B 18A powered by the Daimler-Benz Engine. Saw most use during the post-war years. Armed with 1x 20mm BOFORS Cannon
and a 13mm BOFORS Machinegun. The aircraft is equipped with a bomb sight.
Saab T 18B
Torpedo & Maritime Patrol Aircraft, first planned to carry a torpedo. As no suitable torpedo was found, the aircraft was redesigned as a ground attack
aircraft with a 57mm BOFORS Cannon replacing the bomb bay alongside the Cannon and Machinegun as well as rockets and smaller bombs.
The Aircraft is equipped with a bomb sight.
INSTALLATION:
Install it into the Mod Folder of you choice. Have fun!
CREDITS:
3D model by the Most Creative and Glorious Veltro2k
Skins by the Great Hunter Paulopanz
Cockpit by the most revered and envy of All of Poland Stary
Fact checking, loadouts, ini edits & other random stuff by JonathanRL
198 downloads
(2 reviews)0 comments
Submitted
-
3rd Wire A-1H/A-1J Template Set
By Wrench
This is my template set for the STOCK 3rd Wire A-1H & A-1J Skyraiders.
These are multi layered Photoshop format (PSD) templates for the three main maps
body
left_wing
tail
the templates are 2048 x 2048. there is also a "nodes" map for each, to assist in finding the little odd bits.
the right wing is mapped identically to the left, so the only difference would be for camoflague patterns.
All my myriad layers are intact, which explains the HUGE size of each of them. You may keep or discard those layers that you don't need as you see fit (many are experiments for a mod that fell through)
Somehow or another, these slipped my notice, and should have been uploaded a looooong time ago.
Happy Skinning!
Wrench
Kevin Stein
49 downloads
(2 reviews)0 comments
Submitted
-
[Fictional] Sukhoi Su-9 'Fishpot-B' North Korea
By Spinners
Sukhoi Su-9 'Fishpot-B' (North Korea) for STRIKE FIGHTERS 2
This is a very simple mod of the DLC Third Wire Sukhoi Su-9 to create a fictional export version in service with the Korean People's Army Air Force during the 1961-1999 timeline.
Obviously, you'll need the Third Wire Su-9 from the AI Plane Pack 2 (a lot of fun $3.99). Stary's excellent Su-9 pit is included as is the AA-2NK missile, a patriotically colourful licence-built export version of the AA-2 'Atoll'.
INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the Su-9_NK folder into your Aircraft folder.
2. From the DECALS folder drag and drop the Su-9_NK folder into your main Decals folder.
3. From the WEAPONS folder drag and drop the AA-2NK folder into you main Weapons folder.
CREDITS
Thanks to TK and Third Wire for a great little game/sim (I wish it was still being further developed).
Special thanks to Stary for the Su-9 cockpit.
And thanks to everyone in the wider Third Wire community.
Regards
Spinners
Version 1 - 10/01/16
113 downloads
(2 reviews)0 comments
Updated
-
SF2 WW2 SWP Bristol Beaufighter TF Mk. X, RAAF
By Wrench
SF2 WW2 SWP Bristol Beaufighter TF Mk. X, RAAF, v.9 by Cocas 1/5/2016
-- Something for the WW2 PTO players --
= For SF2, Full-5 Merged (Reccomended/Preferred) =
*This mod will =NOT= work in SF/Wo* 1stGen game installs, at any patch level. It was built for SF2 ONLY!! Also, some statements for anti-ship/naval strike require having SF2NA as part of your merged install (meaning: your WW2 PTO mods folder built from the SF2NA exe).*
*Note x2: This mod represents RAAF Beau TF Mk.Xs for SouthWestPacific (PNG/Solomons/etc) use =ONLY=! This is an Australian-only, Nationalized version, for use in the aforementioned theatre.*
This pack contains the following aircraft & skin/decal sets:
Beaufighter TF Mk.X
No 30 Squadron, RAAF
This pack represents RAAF Beau TF.Xs, from late 1943 through the war's end.
The Squadron Crest for each is used as the paint chip seen on the Loadout Screen.
Skins are in jpg format. All markings are decals, and decal randomization is set to TRUE.
As seen on the Loadout Screen, those letters marked with a star (*) have their serial numbers matched 100% to their plane-in-group letter. Those withOUT the star, while having served with 30 Squadron, could not be matched to their individual aircraft, but ALL are 100% historiclly correct, having served in this squadron. Many were lost on operations or accidents.
All weapons, sounds, pilots, etc are included.
When in-game, you'll see:
Beaufighter TF Mk.X (RAAF) (CAF)
On the Aircraft Selection Drop-down menu. The "CAF" (for Cocas Aircraft Factory) will diferentiate these Beaus from any others you may, or may not, have.
As always, fairly easy to follow, yet detailed install instructions are included. So, please =READ= them BEFORE installing this mod!!!. Also, give the "Notes" section a read too.
Good Hunting!
Wrench
Kevin Stein
- for Cocas Aircraft Factory -
168 downloads
(1 review)0 comments
Submitted
-
SF2 WW2 ETO Bristol Beaufighter TF.X, ANZAC Skin Pack
By Wrench
SF2 WW2 ETO Bristol Beaufighter TF.X, ANZAC Skin Pack 1/8/2016
-- Something for the WW2 ETO players --
= For SF2, Full-5 Merged (Reccomended/Preferred) =
As this skin/decal set is for the ANZAC Strike Wing Beaufighters, is it to be used on the recently released Beaufighter TFX (Early) by Cocas, avaliable at the following url:
http://combatace.com/files/file/15981-sf2-ww2-eto-bristol-beaufighter-tfx-v9-by-cocas/
This pack contains the following aircraft & skin/decal sets:
Beaufighter TF Mk.X (Early)
No.455 Squadron (RAAF) (code - UB)
No.489 Squadron (NZ) (code - P6)
of the ANZAC Strike Wing. Both aircraft carry full D-Day markings. The SF2 "date swtich" is =NOT= used on either skin.
The Squadron Crest is used as the paint chip seen on the Loadout Screen. Skins are in jpg format. All markings are decals, and decal randomization is set to TRUE.
Serials for 489 should be considered 'generic' in nature, and use the serials from the "Coates" deacl folder from the original aircraft release.
Serials for 455 are 100% Historically Accurate and are matched to the "plane in squadron" letter.
On the loadout screen, you'll see...
No. 455 Sqdn RAAF (D-Day Stripes)
No. 489 Sqdn NZ (D-Day Stripes)
As always, fairly easy to follow, yet detailed install instructions are included. So, please =READ= them BEFORE installing this mod!!!. Also, give the "Notes" section a read too.
Happy Hunting!
Wrench
Kevin Stein
- for Cocas Aircraft Factory -
56 downloads
(2 reviews)0 comments
Submitted
-
3rd Wire VA-176 A-1H Template
By 1977Frenchie
A long time project of mine...
This is my template for the STOCK 3rd Wire A-1H Skyraider. It depict the VA-176 A-1H with the "BEE" scheme. As this is my first skin and did not want to be too complicated, this is a single layer one. With time, i will surely evolve :)
Just unzip the folder in your object/aircraft/a-1h directory.
Add the following in the A-1H.ini :
[TextureSetXXX]
Directory=VA176BEE
Name=VA176BEE
Nation=USN
Squadron=VA-176 "Thunderbolts"
Specular=0.000000
Glossiness=0.000000
Reflection=0.000000
XXX stands for the number in sequence.
I added another squadron patch then the VA-176 one used in the A-1 skin pack made by Wrench. So if you have then (hope you have) you will be able to find mine in the drop down list.
This skin is for an A-1 right out of the paint shop, so don't expect a dirty one here!
the template is jpeg format 2048 x 2048.
Work done on the skin : wings, body, tail, weapons pylons, tail wheel, main wheels, tail hook, engine, propeller and interior of the speed brakes.
Now it's yours to enjoy!
Mario C.
63 downloads
(2 reviews)0 comments
Submitted
-
Junkers Ju 88 C-6
By Veltro2k
The Junkers Ju 88 was a German World War II Luftwaffe twin-engined multirole combat aircraft. Designed by Junkers Flugzeug- und Motorenwerke (JFM) in the mid-1930s to be a so-called Schnellbomber ("fast bomber") which would be too fast for any of the fighters of its era to intercept, it suffered from a number of technical problems during the later stages of its development and early operational roles, but became one of the most versatile combat aircraft of the war. Like a number of other Luftwaffe bombers, it was used successfully as a bomber, dive bomber, night fighter, torpedo bomber, reconnaissance aircraft, heavy fighter and even, during the closing stages of the conflict in Europe, as a flying bomb.The Ju 88C was originally intended as a fighter-bomber and heavy fighter by adding fixed, forward-firing guns to the nose while retaining some bomb carrying ability of the A-series bomber. The C-series had a solid metal nose, and retained the A-series style vertical tail, as well as the ventral Bola gondola under the crew compartment, although this was sometimes removed at unit level in order to reduce weight and drag and thus enhance aircraft performance. The Ju-88C was later used as a night fighter and this became its main role.
Model: Veltro2k
Screens, Textures, decals and FM (Charles),
Cockpit (Kesselbrut and capun),
pilots by capun.
install in Objects/aircraft folder
THIS MODEL IS ONLY TO BE DISTRIBUTED AS FREEWARE AND IN NO OTHER CIRCUMSTANCE SHALL IT BE USED, EVEN IN PART OF ANYTHING THAT IS PAYWARE.
IN ACCORDANCE WITH THE COMBAT ACE MODDERS AGREEMENT
259 downloads
(2 reviews)0 comments
Updated
-
Junkers JU-88 A-4
By Veltro2k
The Junkers Ju 88 was a German World War II Luftwaffe twin-engined multirole combat aircraft. Designed by Junkers Flugzeug- und Motorenwerke (JFM) in the mid-1930s to be a so-called Schnellbomber ("fast bomber") which would be too fast for any of the fighters of its era to intercept, it suffered from a number of technical problems during the later stages of its development and early operational roles, but became one of the most versatile combat aircraft of the war. Like a number of other Luftwaffe bombers, it was used successfully as a bomber, dive bomber, night fighter, torpedo bomber, reconnaissance aircraft, heavy fighter and even, during the closing stages of the conflict in Europe, as a flying bomb.The Ju 88C was originally intended as a fighter-bomber and heavy fighter by adding fixed, forward-firing guns to the nose while retaining some bomb carrying ability of the A-series bomber.
Model: Veltro2k
Screens, Textures, decals and FM (Charles),
Cockpit (Kesselbrut and capun),
pilots by capun.
install in Objects/aircraft folder
THIS MODEL IS ONLY TO BE DISTRIBUTED AS FREEWARE AND IN NO OTHER CIRCUMSTANCE SHALL IT BE USED, EVEN IN PART OF ANYTHING THAT IS PAYWARE.
IN ACCORDANCE WITH THE COMBAT ACE MODDERS AGREEMENT
315 downloads
(1 review)0 comments
Updated
-
SF2 "Civil/Firefighter" Mod Part 3
By Wrench
SF2 "Civil/Firefighter" Mod Part 3 1/13/2016
= For SF2, Full 4/5 Merged RECCOMENDED*! =
*-SF2NA is NOT a requirement, but having SF2:E is, as the terrain references objects in the GermanyCE.cat, as well as several aircraft. There are no "naval units" needed for this. HOWEVER!!! SF2:V is REQUIRED, as the Skyraider is used in this mod. Hence, at minimum, a FUll-4 Merged install in required!!*
This is part 3 of the incomplete "civil mod" as discussed on the CombatAce message boards. I've done, and gone, as far as I can, and instead of sitting on what I have, am uploading EVERYTHING in several parts in the hopes that someone will pick up the ball and run with it. A full civilian style flght sim may not even be possible, due to the game's central programing as a "combat flight sim", but you never know.
These packages will be broken down into their various components, and will include the (incomplete) "Forest Bowl" terrain, aircraft, skins and decals, ground objects, what few "weapons" are needed, effects, sounds, and all. Basically, my entire "Civil" mods folder, minus the stock 3W combat aircraft and ground objects.
Part 3 contains the following items:
Terrains/
Bowl
The terrain is a full 4-season, using Stary's GermanyCE set.
As always, (hopefully!) easy to follow, yet detailed install instructions are included. PLEASE read them!!!
It is HIGHLY reccomended you download ALL the parts first, and then unzip them together in a temp folder to assemble. You WILL be creating a seperate, stand-alone mods folder for this. If unsure how to build one, consult the CombatAce SF2 Knowledge Base.
Good Luck!
Wrench
Kevin Stein
161 downloads
(4 reviews)0 comments
Submitted
-
SF2 "Civil/Firefighter" Mod Part 4
By Wrench
SF2 "Civil/Firefighter" Mod Part 4 1/13/2016
= For SF2, Full 4/5 Merged RECCOMENDED*! =
*-SF2NA is NOT a requirement, but having SF2:E is, as the terrain references objects in the GermanyCE.cat, as well as several aircraft. There are no "naval units" needed for this. HOWEVER!!! SF2:V is REQUIRED, as the Skyraider is used in this mod. Hence, at minimum, a FUll-4 Merged install in required!!*
This is part 4 of the incomplete "civil mod" as discussed on the CombatAce message boards. I've done, and gone, as far as I can, and instead of sitting on what I have, am uploading EVERYTHING in several parts in the hopes that someone will pick up the ball and run with it. A full civilian style flght sim may not even be possible, due to the game's central programing as a "combat flight sim", but you never know.
These packages will be broken down into their various components, and will include the (incomplete) "Forest Bowl" terrain, aircraft, skins and decals, ground objects, what few "weapons" are needed, effects, sounds, and all. Basically, my entire "Civil" mods folder, minus the stock 3W combat aircraft and ground objects.
Part 4 contains the following items:
Objects/
Decals
As always, (hopefully!) easy to follow, yet detailed install instructions are included. PLEASE read them!!!
It is HIGHLY reccomended you download ALL the parts first, and then unzip them together in a temp folder to assemble. You WILL be creating a seperate, stand-alone mods folder for this. If unsure how to build one, consult the CombatAce SF2 Knowledge Base.
Good Luck!
Wrench
Kevin Stein
171 downloads
(3 reviews)0 comments
Submitted
-
SF2 "Civil/Firefighter" Mod Part 5A
By Wrench
SF2 "Civil/Firefighter" Mod Part 5A 1/13/2016
= For SF2, Full 4/5 Merged RECCOMENDED*! =
*-SF2NA is NOT a requirement, but having SF2:E is, as the terrain references objects in the GermanyCE.cat, as well as several aircraft. There are no "naval units" needed for this. HOWEVER!!! SF2:V is REQUIRED, as the Skyraider is used in this mod. Hence, at minimum, a FUll-4 Merged install in required!!*
This is part 5a of the incomplete "civil mod" as discussed on the CombatAce message boards. I've done, and gone, as far as I can, and instead of sitting on what I have, am uploading EVERYTHING in several parts in the hopes that someone will pick up the ball and run with it. A full civilian style flght sim may not even be possible, due to the game's central programing as a "combat flight sim", but you never know.
These packages will be broken down into their various components, and will include the (incomplete) "Forest Bowl" terrain, aircraft, skins and decals, ground objects, what few "weapons" are needed, effects, sounds, and all. Basically, my entire "Civil" mods folder, minus the stock 3W combat aircraft and ground objects.
Part 5A contains the following items:
Objects/
Aircraft
(please note this is the 1st half of the aircraft folder. Part 5B will contain the rest. It was just way too large to make one zip of)
As always, (hopefully!) easy to follow, yet detailed install instructions are included. PLEASE read them!!!
It is HIGHLY reccomended you download ALL the parts first, and then unzip them together in a temp folder to assemble. You WILL be creating a seperate, stand-alone mods folder for this. If unsure how to build one, consult the CombatAce SF2 Knowledge Base.
Good Luck!
Wrench
Kevin Stein
180 downloads
(3 reviews)0 comments
Submitted
-
SF2 "Civil/Firefighter" Mod Part 5B
By Wrench
SF2 "Civil/Firefighter" Mod Part 5B 1/13/2016
= For SF2, Full 4/5 Merged RECCOMENDED*! =
*-SF2NA is NOT a requirement, but having SF2:E is, as the terrain references objects in the GermanyCE.cat, as well as several aircraft. There are no "naval units" needed for this. HOWEVER!!! SF2:V is REQUIRED, as the Skyraider is used in this mod. Hence, at minimum, a FUll-4 Merged install in required!!*
This is part 5b of the incomplete "civil mod" as discussed on the CombatAce message boards. I've done, and gone, as far as I can, and instead of sitting on what I have, am uploading EVERYTHING in several parts in the hopes that someone will pick up the ball and run with it. A full civilian style flght sim may not even be possible, due to the game's central programing as a "combat flight sim", but you never know.
These packages will be broken down into their various components, and will include the (incomplete) "Forest Bowl" terrain, aircraft, skins and decals, ground objects, what few "weapons" are needed, effects, sounds, and all. Basically, my entire "Civil" mods folder, minus the stock 3W combat aircraft and ground objects.
Part 5B contains the following items:
Objects/
Aircraft
(please note this is the 2nd, and last half of the aircraft folder.)
As always, (hopefully!) easy to follow, yet detailed install instructions are included. PLEASE read them!!!
It is HIGHLY reccomended you download ALL the parts first, and then unzip them together in a temp folder to assemble. You WILL be creating a seperate, stand-alone mods folder for this. If unsure how to build one, consult the CombatAce SF2 Knowledge Base.
Good Luck!
Wrench
Kevin Stein
this concludes the uploads!
Have at it folks; make something of this or at the very least, HAVE SOME FUN!!
181 downloads
(3 reviews)0 comments
Submitted
-
MiG-17K Fresco-G
By KnightWolf45
This his navalized version off MiG-17F following´s Gepard´s great MiG-17K mod i decide to use my Lim-6 wip and give a new life whit sereval model modifications and a real visual tail hook
this his made to replace Gepard´s MiG-17k and MiG-17K_67 i sugest that download Gepard´s pack frist to get the carrier and then go to you mod folder delete the MiG-17K and MiG-17k_67 folder and instal has usal whit any plane my MiG mod
have fun
Credits
model
Cocas
76.IAP-Blackbird(more details and fixes to Lim-6 and used here)
FM
TW and Gepard tweaks i just just the mesh names etc has need
Skins
by me whit a templet from Flogger23
Cockpit
Stary
free to use any type freewere mod and only freewere mods
Cocas
226 downloads
(5 reviews)0 comments
Submitted
-
T-45C Avionics + Cockpit
By Crusader
T-45C avionics mod
For use with T-45A
http://combatace.com/files/file/11915-t-45a-goshawk-for-sf2/
and the updated T-45A lod (dated 03.03.2012) for it
http://combatace.com/files/file/12720-hawk-t1a-and-t45-fixes7z/
Or to make a stand-alone T-45C from it.
Uses AT-6B cockpit by Dels (included in my mod)
165 downloads
- t-45c goshawk
- goshawk
- (and 1 more)
(2 reviews)0 comments
Submitted
-
F-101B Altimeter Fix for WOx
By Cliff7600
This files will fix the altimeters counters of the F-101B cockpit and RF-101B cockpit, made by ErikGen
For use with F-101B and RF-101B by ErikGen
1st generation (the fix for SF2 is different)
Credits :
ErikGen 3D model
Dave, Column5, mppd, Spillone104, triplethr3at, NGHENGO
Thanks :
Erik for CombatAce
Dave
FastCargo (F-5B flyable from the back seat)
Kulbit80 (uploading the F-5B for 1st gen)
Fracture (TA-4J)
ThirdWire (game, and A-4 cockpit models with working counter)
Mue (LODviewer)
28 downloads
(2 reviews)0 comments
Submitted
-
Download Statistics