Here is the F-15A in Hi-Rez with Lo- Viz stencil per a request from a good friend. Hope you guys enjoy.
Pappy

SF2 A-6A Intruder, VA-42 & VA-128 Skin/Decals Pack              2/12/2018
= For SF2 (Any & All, Full-5 Merged Prefered) =
*Can be used in any install that has access to the stock 3W A-6A*
2 new skins for the 3W A-6A Intruder that depict VA-42 "Green Pawns" and VA-128 "Golden Intruders". Be advised that these are =NOT= combat squadrons, but the Fleet Replacement Squadrons, responsible for training pilots and bombardier/navigators for all Intruder squadrons. VA-42 recieved the very first Intruder in June, 1963. VA-128 recieved theirs in September, 1967. These 2 squadron represent the East Coast (VA-42, NAS Oceana) and West Coast (VA-128, NAS Whidbey Island) training units.
All markings are decals (excepting squadron color flash on tail fins), almost all made new for this mod (excepting the Pawn on VA-42, reused and modified from the original), and decal randomization is TRUE*.  
All serial (BuAerNums) are 100% historical for the A-6A, but should be considered "generic" as they do not depict actual aircraft from this unit. BuNum decalss are the same ones as supplied with another recent upload. Just allow the "Overwrite?" when asked during installing. 
The aircraft is finished in the standard Grey/White scheme, with full color markings. The skin is in stock jpg format.
On the Loadout Screen, for skin selection you'll see:
VA-42 Green Pawns (FRS-ATL) 
VA-128 Golden Intruders (FRS-PAC) 
Please note, =NOTHING= is included that makes the aircraft flyable; no inis, cockpit parts, nothing . You should have made it flyable already or need to seek the "parts" on your own. Also, if you have made it flyable, and use the "Read Only" trick on the main ini (A-6A.ini) to stop reversion to AI-only, you'll have to un-read only it to add this skin.
As always, fairly easy to follow, detailed install instructions are included. So, please read them .... 
Happy Landings!
Wrench
Kevin Stein
*Be advised of while testing, for some reasons, when selecting these skins, the Modex almost always went to the last number*

Here is the E-2C Hawkeye WITHOUT the lower white surfaces for all those who are looking for a late model E-2C.
Again, enjoy,
Pappy

A Hi-Rez skin for Thirdwires F-15A Eagle. Sorry for the long delay. Hope all who use it enjoy. 
Thanks to TK for the aircraft and to all who encouraged me to make this, especially my friend SoulFreak.
Any questions or comments can be sent to me here.
 
 

This is the old and original F/A-18A Hornet made by TMF. The original host place is gone. So i upload the file for all of us, who still love it to fly the first generation Wings Over .... sims.
Below the readme:
 
F/A-18A Hornet  made by The Mirage Factory
****************************************************
----------------------------------------------------------
I. This mod is written for WoX
 
+++++++++++++++++++++++++++++++++++++
II.
CREDITS:
This plane is made by TMF.
SFP1 Model
Plane
3D : Flying Toaster
Mapping, SFP1 import : BPAo
Base Textures : Column5
VMFA-122 Markings : USAFMTL
FM : Column5
Cockpit
3D : Flying Toaster/BPAo
Textures : BPAo, HUD from Kesselbrut
Effects : BPAo
Bidons
3D : BPAo
Textures : Column5
Test Team
Camouflage, Manetsim, Sony Tuckson, Column5, Tom Venom, USAFMTL

My little part was only to repack the files into 7zip format.

----------------------------------------------------------
III.
INSTALLATION:
-Unzip all files into your Wings over Europe or Wings over Israel or Wings over Vietnam or Strike Fighters folder.
------------------------------------------------------------
IV. This mod is FREEWARE. COMMERCIAL use is NOT ALLOWED.
----------------------------------------------------------
V.
For remarks, comments, bugs, etc please use CombatAce forum or send me a PM.
Hope you enjoy it.

Michael (Gepard)
February 2018
 

E-8A/C Joint STARS
This mod builds upon the E-8C found in the original ODS campaign and corrects for an E-8A as used in Desert Storm.
    Included
E-8A with skins for Desert Storm, Testing (92-95), and Bosnia
E-8C with skins for the 93d ACW and the 116th ACW Georgia Air National Guard
    Installation
unzip, cut/copy and paste to mod folder. allow overwrite (should only apply to ODS mod folders), although for best results remove the old E-8C files from aircraft and decals.
    Credits
the original model and skin was created by The Mirage Factory, based on the 707 model by Bpao
C-130 pit by dels
Skin adjustments, tga and ini work by daddyairplanes
original moddable game by TK
    Known Issues
dels C-130 pit is used to make the aircraft player flyable. this pit is not very suited to the 707 airframe (alot of extra frame for a 707), but works for its purpose. The aircraft was not originally intended to be player flyable (airborne command and control not being a player mission set) and is best used as eye candy. However, i always put a pit in so i can see how my work progressed, and leave it for you guys to use too.
I hope you enjoy this mod
Kevin Unruh aka daddyairplanes
11 Feb 2018
 

A completely new F/A-18A Hornet by Flying Toaster, Bpao, C5 and USAFMTL. Includes very detailed pit, droptanks and sounds.

As promised...here is the E-2C Hawkeye in Hi-Rez for all you guys who released E-2 Hawkeye skins in 512 x 512. Hope you guys enjoy.
Special thanks to 1977Frenchie for all his help in the completion of this skin.
 
Questions or comments can be sent to me here.
 
Regards,
Pappy