Mig-17PF (SP16) FOR SF2
 
To install just extract with directory structure intact to the Aircraft folder
 
This is just a update model of Wrench model with new Mig17 PF body
 
thank for all people that have work on this game
 
Credits:
Madcaddie for creating the orginal Fresco D & E mods
Lexx_Luthor for weapons locations tweeks
FastCargo for the 'fake pilot mod'...very cool!!
Wrench for doing the original skins to something better looking.
TK & the 3rd Wire team for creating the MiG-17, and the original skin.
 
Christian

JH-7A Flounder For SF2
 
*******************************************************************************************************************
 
These from Wiki:
 
The Xian JH-7 (Jian Hong-7; NATO reporting name Flounder[1]), also known as the FBC-1 (Fighter/Bomber China-1) Flying Leopard, is a two-seater (tandem), twin-engine fighter-bomber in service with the People's Liberation Army Naval Air Force (PLANAF), and the People's Liberation Army Air Force (PLAAF). The main contractors are Xian Aircraft Industry Corporation (XAC) and the 603nd Aircraft Design Institute,now named First Aircraft Institute of AVIC-1. The first batch of JH-7 aircraft were delivered to the PLANAF in the mid-1990s for evaluation, and the improved JH-7A variant entered service in 2004.
 
*************************************************************************************************************************
 
JH-7
 
Skins by YEYEYE
 
3D Model by YEYEYE
 
Flight Model by Erwin_hans
 
INI work by YEYEYE and Erwin_hans
 
Effects by YEYEYE and Erwin_hans
 
PLAAFpilot by YEYEYE
 
Zvezda K-36D Ejection Seat by AleDucat
 
SF2 updates by NeverEnough
***********************************************************************************************************************
 
1.Unzip the JH-7A.rar
 
2.Simply extract the contents of the JH-7A folder into your Mods\StrikeFighters2 folder.
 
3.Then............enjoy it
 
This is a very nice model of a modern Chinese attack aircraft. The original BETA release has been tuned to fix a few small issues. The Weapon Station attachment positions have been adjusted, the landing gear rolling radius has been tweaked, the engine fans rotate correctly, and the drag parachute works. This bird is nice to look at and brutally efficient at attack and shipping strikes. For any air-to-air work, the PL-8 heaters get the job done!
 
Shift 0 will open and close the canopy, and the drag parachute will deploy when the airbrakes are activated on the runway.
 
******** EVERYONE CAN USE THESE MODELS for all Third Wire projects, as you want.************************
 
 
Erwin_Hans,YEYEYE
 
 
 
----------------Inksy Group 2008

RAN/RNZAF A-4G MOD SF2 AND MERGED SF2 INSTALLS ONLY. Version 1.0
 
WARNING:
 
This MOD needs the stock .LOD files included in SF2 to work, so if you do not have SF2 the Mod will not work. The Mod will work if you have SF2 and other Series 2 games as a Merged Install.
 
 
INSTALL:
 
Just unzip and place the contents of Aircraft to the Aircraft Folder and Decals to the Decals Folder.
 
 
Thanks to Thirdwire and TK for creating the games which have brought me many hours of fun and pleasure.
 
To Combat Ace for creating a place to download and upload files which further add to the games.
 
 
 
FOOTNOTE 1; All files could, or will change with with game updates. I will update where and when I can.
 
FOOTNOTE 2; I would like to take the time now to apologise to all who may of downloaded this MOD thinking it would work in SFE2 stand-alone install. I have been also told it will not work on SFV2 stand-alone. I sincerely apologise.
 
James Fox

RNZAF A-4K MOD FOR SF2 AND MERGED SF2 INSTALLS ONLY. Version 1.0
 
 
 
WARNING:
 
This model needs the stock .LOD files included in SF2, so if you do not have SF2 the Mod will not work. The Mod will work if you have SF2 and other Series 2 games as a Merged Install.
 
 
INSTALL:
 
Just unzip and place the contents of Aircraft to the Aircraft Folder and Decals to the Decals Folder.
 
I have included three skins and will soon will have more.
 
 
Thanks to Thirdwire and TK for creating the games which have brought me many hours of fun and pleasure.
 
 
To Combat Ace for creating a place to download and upload files which further add to the games.
 
 
FOOTNOTE 1; All files could, or will change with with game updates. I will update where and when I can.
 
FOOTNOTE 2; I would like to take the time now to apologise to all who may of downloaded this MOD thinking it would work in SFE2 stand-alone install. I have been also told it will not work on SFV2 stand-alone. I sincerely apologise.
 
James Fox

For SF2 only, read the readme
 
Skin by EricJ
Decals by pureblue

J32B Lansen Interceptor For SF2
 
BETA based on A32A model by Timmy.
 
Good A32/J32 resources here...
 
Canit, deep stuff on all SAABs ~> http://www.canit.se/%7Egriffon/aviation/
Vectorsite SAABs ~> http://www.vectorsite.net/avsaab.html
 
--------
 
A32A 3D model by Timmy.
Cammo Skin and Metal silver Skins by Timmy.
Dark Green Skin & national decals by Knug.
FM work by Lexx.
Euro001 Pilot by Diego.
Martin Baker Mk GW5 Ejection Seat by Ravenclaw_007.
Swedish RB Missile Set by Ravenclaw_007.
SF2 updates by NeverEnough.
 
Uses the Thirdwire SF2 F-105D cockpit and avionics. Every effort has been made remove as much of the Beta aspect as possible. The weapon positions on the pylons have been adjusted, the weapon stations have been tweaked to avoid model overlaps, and the weapon loadout has been tested to insure every plane in the flight is loaded for bear.
The lighting positions and wheel rolling radius have been corrected. FlapSettingForLanding and FlapSettingForTakeOff was added to the FlightControl section of the Data.ini, which helps the AI absolutely grease their take offs and landings!
TIMMY made a very nice model and Lexx assembled a data.ini which flys stable and sporty. The plane looks good, and fights just as well. There is no need to fear the MiG-17F.
TIMMY SAYS: Model and Template are available for those wanting to work with them.
 
Installation:
Simply extract the contents of the J-32B Lansen folder into your Mods\StrikeFighters2 folder.
 
Default Loadout:
4 30mm Aden Cannons
4 Rb24 Swedish Sidewinders
Basic setup for 12 Swedish 18cm-m49 air-ground rockets but this is just an example use of Timmy's great pylons. Timmy made this as an A32 so we
have 12 pylons here if they are used (invisible if not).
Conformal nonjettisonable belly tank.
 
Avionics is SF2 F-105D but basic radar performance (not display) tweaked towards J32B levels.
 
RWR is audio only.

Bat Bird Texture pack
 
by: Fubar512
 
 
This texture-set represents Ed Rasimus's F-105D, "The Bat Bird", as it would have appeared in its heyday.
 
The USAF had not fully implemented the two-letter tail code in those days, so birds from the 421st TFS flew with their vertical stabs unadorned, save for an abbreviated code. And that code consisted of the last digit of the fiscal year in which a particular bird was ordered, followed by its 4-digit serial number.
 
"Nose Art" was not officially authorized, so the Bat Bird insignia was present for only two weeks during Ed Rasimus's tour with the 421st.
 
I've also taken the liberty of tweaking a few values in the F-105D-66 flight dynamics file, including its power plant's thrust values and altitude tables. The former was corrected to the proper values for a J75-P-19W mill, the latter simply an expanded table to more accurately reflect performance at altitude.
 
Engine, gear, and flap sounds have also been provided.
 
Installation:
 
Simply extract the contents of the zip archive into your SF2V mod folder. It will overwrite only one file (the F-105D_66.ini file), and that will no effect it in any other way, other than changing the displayed model's name to it's correct one, and adding the necessary lines of code for the new texture-set.
 
It will also create sounds folder, if you did not have one, already.
 
If you're unsure of the location of your mod folders (it's location depends on which flavor of Windows you're running), simply go to the SF2 knowledge base at www.combatace.com, where you'll find all the help you need, and then some : )
 
Enjoy....
 
fubar512

MiG-23UB JG9 East German Air Force
 
It is for Lindr2´s MiG-23UB.
Skin is for SF2 not WoX or SFP1!!!!
 
- Lindr2 for the outstanding MiG-23UB Model
- Blackrat for his temps that i have completely reworked
 
 
 
------------------------------------------------------------
this skin is released under the freeware licensing agreement
http://forum.combatace.com/index.php?showtopic=26131
------------------------------------------------------------
 
 
I hope you´ll like this skin.
 
 
Peace.
 
 
Carlo "Soulfreak" Vecchi