SUBCATEGORIES
-
hmmwv(with 40mm MK19)
By jv44kt
a hmmwv with 40mm MK19 Automatic Grenade Launcher,(original 3D model from GoogleSketchup)
199 downloads
-
Hollywood Explosions
By Stary
HOLLYWOOD EXPLOSIONS
(Previously announced as "Enhanced Explosions 4")
by Stary
For Thirdwire series of Flight Simulators
both Gen1 and Gen2 titles
Note:
This pack was made for, and heavily tested in SF2:Israel merged with all SF2 gen titles. Dec09 patch installation.
No warranty for Gen1 Series/HDR Mod usage!
-----------------------------------------------------
Hollywood Explosions f/x pack is my 4th edition of effects modding. I decided to name it this way, as a tribute to Longbow/Longbow 2 series of simulators -there was such an option there...
And ideology besides, as EE4 sounds kinky, new name for the pack... ok, RAMBO 4 was good, ALIEN Ressu-whatever was not...
1,846 downloads
-
HQ-9 Self Propelled Air Defence System
By angelp
HQ-9 Self Propelled Air Defence System
The FD-2000/HQ-9 was developed to provide a long range SAM capability, distinct from the medium range capabilities of the HQ-12/KS-1 series. The FT-2000 is a derivative which is fitted with an anti-radiation seeker and intended for engagements against AEW&C/AWACS and stand-off jamming aircraft.
The HQ-9 is supported by the HT-233 phased array engagement radar, like the H-200 modelled on the MPQ-53 and 30N6E designs, carried on a Taian TAS5501 series 10 x 10 high mobility vehicle, common to the HQ-9 TEL and similar in design to the S-400's BAZ-6900 series vehicle. Chinese sources claim C-band operation with 300 MHz receiver/antenna bandwidth, detection and tracking range of 150/100 km, and monopulse angle tracking to resist jamming. The design bears considerable similarity to the 30N6E series, especially in the antenna design.
Recently disclosed imagery shows the use of the self-propelled Type 305A, Type 305B and Type 120 radars as the battery acquisition radar component. The designation FD-2000 is for export configurations of the HQ-9.
Instalation:
-------------------------------------------------------------
Put the content of the objects/ folder in your mod folder.
Crédits :
--------------------------------------------------------------
3d Model, textures, INI files: angelp
This addon is and will in all cases remain freeware, and is only allowed to be available here in Combat Ace
Released under Combat Ace Fair-Use terms
188 downloads
-
HUD modification for SF2
By ignacioc91
Hi!!! I felt tired of the "HUD" information, so I modified the HUDDATA.ini, and I'm sharing it with you guys!
The attached photos speak for themselves. I only left the enemy red box, the red cone that marks it's direction, and the yellow diamond for radar acquisition. If you want, you can modify it to suit your needs. Just unzip, and move it to your mods folder, to the Flight directory. If you don't have one, create it. Doubts? Just PM!!!I hope you like it!!!
Greets,
Ignacioc91
316 downloads
-
Improved Afterburner Effects for Strike Fighters 2
By Spillone104
Improved Afterburner Effects for Strike Fighters 2 V1.0
-------------------------------------------------------------------------------------------------------------------
Installation:
Put the .INI and .TGA files in the Effects folder.
User\Saved Games\ThirdWire\StrikeFihgters2\Effects
<<<VERY IMPORTANT!>>>
Then the real work begins:
Open the DATA.ini of the aircraft you want to use these effects.
Since this effect is a combination of 2 emitters, one volumetric and the other in the form of a ribbon(for shock diamonds)... You need to duplicate the engine or engines in this way:
(As exhample the F-105 is used)
[Fuselage]
SKIP ALL THE PARAMETERS
SystemName[001]=Engine
SystemName[002]=Tailhook
SystemName[003]=Airbrake1
SystemName[004]=Airbrake2
SystemName[005]=Airbrake3
SystemName[006]=Airbrake4
SystemName[007]=AftTank
SystemName[008]=BombbayTank
SystemName[009]=CenterlineStation
SystemName[010]=TopFuselageLight
SystemName[011]=Engine2 ADD THE NEW ENGINE
Edit the afterburner emitter on the first engine:
[Engine]
AfterburnerEmitterName=J79-ABEmitter CHANGE TO THIS ONE
Then add the second engine below the first true one.
[Engine2]
SystemType=JET_ENGINE
InputName=THROTTLE_CONTROL
EngineID=1
HasAfterburner=TRUE
NumAfterburnerStages=4
SLThrustDry=0.00 THE THRUST MUST BE SET TO 0.00
SLThrustWet=0.00 THE THRUST MUST BE SET TO 0.00
ThrustAngles=0.0,0.0,0.0
ThrustPosition=0.0,0.0,0.0
ThrottleRate=0.15
NozzleAnimationID=3
IdleThrottle=0.10
IdleRPM=0.68
IdleNozzle=0.0
CruiseThrottle=0.37
CruiseRPM=0.82
CruiseNozzle=0.0
MilThrottle=0.65
MilRPM=1.00
MilNozzle=0.0
MaxThrottle=0.78
MaxRPM=1.00
MaxNozzle=0.0
FullABThrottle=1.12
FullABRPM=1.00
FullABNozzle=1.0
AltitudeTableNumData=10
AltitudeTableDeltaX=3048.0
AltitudeTableStartX=0.0
AltitudeTableData=1.000,0.802,0.634,0.496,0.381,0.288,0.206,0.147,0.105,0.000
DryMachTableNumData=4
DryMachTableDeltaX=0.4
DryMachTableStartX=0.0
DryMachTableData=1.000,0.980,1.172,0.000
WetMachTableNumData=7
WetMachTableDeltaX=0.4
WetMachTableStartX=0.0
WetMachTableData=1.000,0.991,1.207,1.683,2.473,2.750,3.027
MaxInletTemperature=136.1
TSFCM0=0.00 AND THE FUEL CONSUMPTION TOO
TSFCM1=0.00 AND THE FUEL CONSUMPTION TOO
AfterburnerTSFCM0=0.00 AND THE FUEL CONSUMPTION TOO
AfterburnerTSFCM1=0.00 AND THE FUEL CONSUMPTION TOO
MinFuelFlow=0.02
ExhaustEmitterName= DELETE THE SMOKE
ExhaustPosition=0.0,-9.27,0.51
AfterburnerNodeName=afterburner
AfterburnerEmitterName=J79-ABEmitter2 AND CHANGE THE EMITTER
AfterburnerEffectSize=1.10
MinExtentPosition=-0.78,-9.07,-0.28
MaxExtentPosition= 0.78,-3.22, 1.29
FireSuppression=TRUE
GasTempMaxRPM=650.0
GasTempIdleRPM=340.0
GasTempChangeRate=5.0
OverheatTemp=675.0
DamageTempDelta=300.0
OilPressMaxRPM=50.0
OilPressIdleRPM=35.0
OilPressChangeRate=0.5
LowOilPress=12.0
LowOilTempDelta=400.0
HasArmor=TRUE
ArmorMaterial=STEEL
Armor[FRONT].Thickness=12
Armor
.Thickness=12
Armor
.Thickness=12
Armor[REAR].Thickness=12
Armor[bOTTOM].Thickness=12
That's it! Now you have your jet with new afterburner flames.
-------------------------------------------------------------------------------------------------------------------
Beta testers : Canadair and Dysko.
-------------------------------------------------------------------------------------------------------------------
Legal stuff:
This mod is freeware. Commercial use is not allowed.
------------------------------------------------------------------------------------------------------------------
Enjoy and good flight. :)
November 2011
Spillone104
525 downloads
-
Improved Chaff and Flare Effects
By orsin
The purpose of this mod is to improve the chaff and flare effect. The stock effects does not provide realistic drag efficient for both Chaff and Flare. This mod improves these aspects to make combat countermeasure effects a bit real.
Installation
-----
Extract the files under your SF2 mod main folder and overwrite the file.
551 downloads
-
Improved Countermeasure Effect
All in all, this is a mod that restores the visual effects of Flare according to the photos IRL, you can refer to the screenshot I uploaded.
In addition to purely visual effects, the response to gravity has also been adjusted by the way, so this mod will look more realistic overall.
And of course, this is still a BETA version, I think I need to make further adjustments.
Usage:
Copy Effects and Objects folders into your SF2 main folder
284 downloads
-
Improved Ground Gun Accuracy
By orsin
The purpose of this mod is to improve the ground gun accuracy especially the AA Guns. It changes the game's default ballistic coefficient entries and make better speed retention for trajectory items. Thus it makes guns perform much better for anything flying straight line.
I have included 2 types of data in this mod. Please choose the one that works better for you.
Type A = Ballistic Coefficient changed to 1.1 times, better gun accuracy.
Type B = Ballistic Coefficient changed to 1.2 times, even higher gun accuracy but may influence AI plane in missions.
Also included the ballisticdata change program which when open in a folder that contains G1.dat, will allow you to change the entries.
For artillery, in addition to this mod, you can also change the accuracy in the gun data to 125 (yes, you can actually exceed 100)
Installation:
-----------------------------------------
Extract the G1.dat file under Type A or Type B folder under Objects folder in your mod directory
Uninstallation
----------------------------------------
Delete G1.dat file under Objects folder in your mod directory
131 downloads
(0 reviews)0 comments
Updated
-
Improved Wingtip Vortex v1.0.rar
By Eagle114th
Improved Wingtip Vortex Effect pack Version 1.0 by Eagle114th
The purpose of this add-on effect mod is to improve the graphic of wingtip vortex in Strike Fighter 2. I have noticed that wingtip vortex, by default, looks bit unrealistic. So I have decided to improve these, inspired by modders from Combat Ace community, especially by Wrench and Stary. I am very thankful for this wonderful community and I am more than proud to be part of Combat Ace commmunity sharing my hobbies within Strike Fighter 2. I truly hope that you enjoy my improved wingtip vortex effect package, you can post feedback/suggestion for improving my effect pack at this link:
http://combatace.com/topic/75798-wip-improved-wing-tip-vortices-updated-11-18-12/#entry601081
----------------------------------------------------------------------------------------
INSTALL INSTRUCTION:
1) MAKE SURE YOU back up your EFFECT folder!
2) Extract this file using winrar or 7zip tools and you will see a folder called "Improved Wingtip Vortex v1.0"
3) There are two folders with types of wingtip vortex:
- Straight trails Version = new wingtip vortex effect with straight trails
- Shakey trails Version = new wingtip vortex effect with shakey trails
You can only pick ONE of these two folders, you can't have both at the same time. You can try one of these two version first. Then try other and see which one you like the best. However, inside these folder you will see "Effect" folder, drop them in your strike fighter 2 mod folder and overwrite when asked.
4) ENJOY!
----------------------------------------------------------------------------------------
Known BUGS/Problem:
Shakey version of wingtip vortex trails disappears at specific angle when you view them, this is due to nature of 2D. I have tried creating 3D volumetric version of wingtrip vortex, they got too complicated and hogs cpu and memories lot. I had to cancel my project of converting 2D wingtip vortex from 2D to 3D, to avoid heavy cpu and memories hogging for anyone's computer. I intend to make this mod very friendly for any computer. That is exactly why I created two version of wingtip vortex (straight and shakey).
----------------------------------------------------------------------------------------
CREDIT:
TK - Thank you very much for creating this great simulation known as Strike Fighter 2. Your hard work have created this simulation for us all to enjoy together, especially our passions/hobbies of creating mods for improving Strike Fighter 2 into greater simulation.
FalcCAF (Erik) - THANK YOU very much for working on this project with me, giving me feedback that helped me improving my effect pack through my modding progress with your great knowledge!
dgk196 - THANK YOU for helping me very much with improving my wingtip vortex effect modding with your knowledge, especially your experiences have from your services in US Navy.
Wrench - You have been great inspiration that encouraged me into modding games and simulation long time ago. You have been my hero in old day of Jane's Fighter Anthology with your modding.
Deuces - Thank you, your effect pack in SF1 series have taught me how to do some basic effect modding for SF1 and 2 series.
Stary - Your great effect pack in SF2 have taught me alot about modding effect pack, thank you!
Combatace community - Thank you community for letting me be part of this great community!
520 downloads
-
India-Pakistan Objects/Weapons/and Other Bits
By Wrench
India-Pakistan GroundOjbects/Weapons/Guns/Pilots Pak
-For SF2, Full-4 Merged -Reccomended (plus ExpPak1)
(Should actually be called "Objects, Other Than Aircraft Pack")
This is the Second Part of the India-Pakistan mod. This package =ONLY= contains GroundObjects, Weapons & Guns, Menu Screens. Aircraft will be available as seperate, packaged downloads as soon as we get them together!
These weapons and Ground Objects are NOT to be used altogether in a 'everything and anything Merged Install -- it is for a Stand-Alone India-Pakistan Mods folder ONLY!!!
Those experienced End Users , will be able to pick and choose the various items necessary, if crazy enough to use these in such an install. There are many (read: MOST) items that have been nationalized to either side. It is NOT reccomended for any use, other than what is it intended for!! You've been warned -- if you mess it up, it's all on YOU!!
These items are designed for use with/as a stand-alone India-Pak Mods Folder. Instructions for creating a seperate I/P install are in the Word Doc that comes with this pak, and are covered in the CombatAce SF2 Series Knowledge Base.
It is ALSO highly reccomended you READ these 2 documents through before installing this mod. If you don't, you're SURE to run into problems. And then, we'll clown on you. Hard
Good Hunting!
For the India-Pak Mod Team;
Wrench
Kevin Stein
502 downloads
(0 reviews)0 comments
Updated
-
Insignias and tactical numbers for stock tanks
By Gepard
Tactical numbers and insignias for stock tanks
*****************************************************
This mod is made for SF2.
----------------------------------------------------------
I.
In the history it was common that tanks got tactical numbers and showed insignias for better friend and foe identification.
This package included modded stock tank files, so that the tanks will show numbers and insignias in single missions and campaigns.
It contains insignias and tactical numbers for:
Leopard A1 to A5
Centurion Shot and Shot Kal
M48 Magach 3
M60 Magach 6
M48A2
M48A3
M60A1
T-34-85
T-54
T-55
T-62A
T-72A
For M48, M60, T-54 and T-55 i added workable anti-aircraft-machine guns. I also changed the armour of some tanks values to make them closer to real world
-----------------------------------------------------------------------
II.
INSTALLATION:
-Unzip the object folder into your SF2 mod folder
----------------------------------------------------------
III.
For remarks, comments, bugs, etc please use the forum or send me a PM.
-------------------------------------------------------------
IV.
All files are FREEWARE. COMMERCIAL USE IS NOT ALLOWED!
------------------------------------------------------
------------------------------------------------------------
Hope you enjoy it.
Michael (Gepard)
Made in Germany
December 2021
113 downloads
-
Jet Hangars
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Collection of 2 hangars with 12 skins one with open doors and the other closed.
For SF2 only
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the files to Objects folder and the falowing to _TYPES.ini file
[TargetTypeXXX]
Name=GK-CHangar1
FullName=GK-CHangar1
ModelName=GK-CHanger1.LOD <---- change the number for the skin name you need
TargetType=HANGAR
ActiveYear=0
TargetValue=50
UseGroundObject=FALSE
DamagePoint=140.0
ArmorValue=24516080.0
ArmorType=2
RepairRate=0.150
StartDetectChance=20
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
CollisionMesh=Shelter_Hardened1_col.LOD
DamagedModel=
DestroyedEffect=MediumShortStructureCollapse
DestroyedModel=
SecondaryChance=100
SecondaryEffect=LargeFire
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
87 downloads
(0 reviews)0 comments
Updated
-
Jet pilot
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
New Pilot model
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
This is for Strike Fighters 2 Series ONLY.
Installation:
Copy the files to Objects\pilot folder
Add these lines to the _DATA.INI file to any jet you would like to add the new pilot to.
[Pilot]
PilotModelName=GK-Pilot <----
PilotHeadNodeName=GK-Head <----
if you have a two-seater add the Copilot as well.
[CoPilot]
PilotModelName=GK-Pilot1 <----
PilotHeadNodeName=GK-Head <----
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
Fuse
FaceGen
If you need any assistance please contact me at
gkabs@gkabs.net
325 downloads
-
JGSDF Vehicle Pack 1
This is a package of 18 ground objects for the Japan Ground Self Defense Force, representing many of the significant combat vehicles from the 1970s to present. Four additional non-Japanese variants are included as a bonus, for a total of 22 distinct ground objects. All-new guns and missiles are included.
Note that these are all new models and not stand-ins or re-skins of existing ones. While they are relatively low-poly and low-res, if there is sufficient demand, I will update these models with more detail and improved textures at some point in the future.
Featured JGSDF vehicles include:
Type 74 MBT: Cold war era tank armed with a 105mm L7 gun
Type 90 MBT: Modern tank equipped with a 120mm gun, composite armor and advanced electronics
Type 87 Recon: Modern 6-wheeled armored recon vehicle with excellent sensors and a rapid-fire 25mm gun
Type 89 IFV: Modern armored infantry fighting vehicle with a 35mm autocannon and anti-tank missiles
Type 73 APC: Cold war era tracked APC
Type 96 APC A: Modern 8-wheeled APC (automatic grenade launcher)
Type 96 APC B: Modern 8-wheeled APC (heavy machine gun)
Type 87 AAA: Mobile anti-aircraft vehicle with twin 35mm guns
Type 93 SAM: Mobile short-range SAM
Type 75 MRL: Cold war era 130mm rocket launcher
Type 75 SPA: Cold war era 155mm mobile howitzer
Type 99 SPA: Modern 155mm mobile howitzer
Type 96 MPMS: Truck-mounted multi-purpose missile system designed to defeat tanks and landing craft
M110 SPA: License-built version of cold war era 203mm howitzer
M270J MLRS: License-built version of the US 227mm rocket launcher
L-90 AAA: License-built variant of the Swiss 35mm towed AAA system
Komatsu LAV: Modern light armored truck
Komatsu LAV-AT: LAV equipped with anti-tank missile launcher
International vehicles include:
GDF-001: Popular Swiss 35mm towed AAA system; used by many countries
GDF-002: Upgraded 35mm towed AAA system; used by many countries
M270 MLRS: US 227mm rocket launcher
M270A1 GMLRS: US 227mm GPS-guided rocket launcher
Two texture sets, default camo and green, are included for each vehicle. (US MLRS are Green and Tan instead.)
Additional vehicle packs for the JGSDF, ROK, and PLA may follow if this mod is well-received. (Don't worry, I'll still keep on making ships.)
These ground objects are recommended for use with Wrench's latest Korea terrain, as well as Kamchatka and other East-Asian theaters. Please see the readme for full details. If you have any questions, comments, concerns, or constructive criticisms regarding this package, please do not hesitate to contact me. Thank you!
564 downloads
-
Julhelms_FactoryObjects.7z
By PureBlue
These ground objects were simply converted to LOD format from models kindly shared by Julhelm from Combatace. All credit goes to him.
12/30/2010
(Fixed J_16OpenSilos)
12/28/2010
Models by Julhelm
Conversion by Pureblue
1. Insert the various groundobject entries from xxx_types.ini to your modded terrain_types.ini.
2. Copy over the Diffuse.tga, *.LOD and *.INI files to your terrain folder.
3. Create corresponding target objects in terrain_targets.ini
548 downloads
(0 reviews)0 comments
Updated
-
KAW/Post War B-29 & RAF Washington B.1 Data ini Fixit Pack
By Wrench
SF2 KAW & Post-War B-29 & Washington B.1 Adjustment Pak 8/31/2017
-- Something for the WW2 ETO players --
= For SF2 ONLY, Full-5 Merged (Reccomended/Preferred) =
This package contains a new, modified data in for the Post-War and KAW era B-29 Superfortress, and the RAF Washington B.1. Also included is a "backed up" copy of the original data ini, just for safety's sake.
For those with the skill to copy/paste, you can use this data ini for your WW2 PTO B-29 as well. You'll only need to copy/paste the TOP section of the original data ini from your WW2 B-29 into this new one.
If you have this aircraft already, THIS is the pack to use. Both of the full aircraft mods, available here in the CA Downloads, have already been updated for new users.
Reminder - if you have this aircraft already, you do =NOT= need to redownload the entire aircraft again.
= Instructions for Use:
unzip to a temp folder or your desktop.
Copy/paste the B-29_data.ini (and B-29_Data - copy.ini) You know, copy them BOTH into the KAW/Post-War B-29's folder.
Do the Same for the Washington B.1. Copy/paste BOTH supplied data inis into the WashingtonB1 folder.
Go fly.
Good Hunting!!
Kevin "Wrench" Stein
Updated 8/31/2017
Changes:
All hit boxes reset or newly created for those components without
Small adjustment to some FM parameters.
79 downloads
-
KittyHawk/Nimitz Class Carriers Names
By Swordsman422
This file contains names for the entire class for the Thirdwire Kitty Hawk and Nimitz aircraft carriers.
Installation
1. Drop CVA-63_Names into the CVA-63 folder in your Thirdwire/Strike Fighters 2/Objects/Groundobjects folder. Put CVN-68_Names into the CVN-68 folder.
2. Enjoy how you will.
Known issues
1. CV-67 is not a member of the Kitty Hawk-class. However, there is no existing model for the JFK, nor is there going to be one in the foreseeable future. However, she is a historically significant vessel and was closely based on the Kitty Hawk carriers, so I have chosen to place her with them.
Thanks for downloading!
Any questions, issues, or requests please contact me through my profile Swordsman422 at Combatace.com
212 downloads
(0 reviews)0 comments
Submitted
-
KS-3/4 Ejection Seats
Hello Guys,
We are releasing the KS-3 and KS-4 Ejection Seats for the upcoming Sukhoi family.
KS-3 was used by Su-7/9/11/17 early
KS-4 was used by Su-15/17M/20/22
If the seats were used by other planes, just post the info in the comments pls.
Place the seats on the Objects/Pilots folder on your game folder and use this in the (plane) data.ini for the new seats:
Positon for the TK Su-7: (example)
// Crew ---------------------------------------------------------
[Pilot]
SystemType=PILOT_COCKPIT
PilotModelName=Pilot_Mi-8
SetCockpitPosition=TRUE
Position=0.0,4.93,0.83
SeatModelName=KS-4
SeatPosition=0.0,4.79,0.86
****************************************
You need to remove the Su-7 standart seat first with ini edits:
"Su-7_data.ini"
[AircraftData]
***
***
Component[0xx]=EjectionSeat <----- add this to the components (take care of the number for the xx)
[EjectionSeat] <----- Add this section down below the components
ParentComponentName=Fuselage
ModelNodeName=EjectionSeat_ok
DestroyedNodeName=tailgun_cabin_glass
DetachWhenDestroyed=TRUE
HasAeroCoefficients=FALSE
------------------------------------------------------------------------------------------------------
Model by 76.IAP-Blackbird
Skin by Enoc alias Flogger23
143 downloads
(2 reviews)0 comments
Updated
-
Lavochkin static prop fix
By Wilches
Dear simmers
This files are made to fix the Bunyap´s great Lavochkin La-9/11 wich´s lacking the static prop. To install place the DATA.INI files inside the respective plane. The SLOWPROP.TGA goes to every skin folder replacing the older one. Now the Lavs got props when parked and start engine! Hope you guys like it.
It´s a freeware, so you can use freely wich means that you don´t need to ask any kind of permission to post, change or anything else.
Claudio Wilches - August 2013
116 downloads
-
LED-TEMPORARY-RWY-CLOSURE-MARKER
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
LED-TEMPORARY-RWY-CLOSURE-MARKER
this model come with two skin white and sand color.
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the files to Objects folder and the falowing to _TYPES.ini file
[TargetTypeXXX]
Name=GK-LED-TRCM
FullName=GK-LED-TRCM
ModelName=GK-LED-TRCM.LOD
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=FALSE
DamagePoint=0.1
ArmorValue=0.1
ArmorType=0
RepairRate=10.0
StartDetectChance=20
StartIdentifiedChance=20
IncreaseDetectChanceKey=0
MaxVisibleDist=4500.0
DamagedModel=
DestroyedEffect=VehicleFireEffect
DestroyedModel=
SecondaryEffect=SmallRocketGroundExplosion
SecondaryChance=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
36 downloads
(0 reviews)0 comments
Updated
-
Ludun 2000 (LD-2000) SPAAGM
By angelp
Ludun 2000 (LD-2000) SPAAGM
The Ludun-2000 is a Chinese copy of the Thales Nederland Goalkeeper 30 mm close-in weapons system (CIWS) mounted on the rear a 8 x 8 single cab flat bed truck and generator and system container behind the cabin.
The Type 730B gun is a copy of the General Electric GAU-8 30 mm x 173 mm seven-barrel Avenger gun used on the A-10. It fires at 4,200 rounds-per-minute with the APDS round having a muzzle velocity of 1,150m/sec and the HE cartridge of 920m/sec. There are two 500 round cylindrical magazines either side of the gun.
By design, the LD-2000 is essentially a land based derivative of the existing PLAN Type 730 CIWS, itself modelled on the closed loop tracking US Phalanx CIWS and EU Goalkeeper CIWS.
More recent imagery depicts the addition of a mast mounted search radar and six launch tubes for the TY-90 Surface-to-Air-Missile.
Instalation:
-------------------------------------------------------------
Put the content of the objects/ folder in your mod folder.
Crédits :
--------------------------------------------------------------
3d Model, textures, INI files: angelp
This addon is and will in all cases remain freeware, and is only allowed to be available here in Combat Ace
Released under Combat Ace Fair-Use terms
121 downloads
(1 review)0 comments
Submitted
-
M-84 Yugoslav MBT
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M-84 Yugoslav MBT model
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please change the XXX with the correct number from your //Soundlist:
[SoundList]
SoundFileXXX=PKT762
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
SoundFileXXX=grenade
[PKT762]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[grenade]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Nightshade/PR for searching information for the tank blueprint.
AleksejFonGrozni as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
https://sketchfab.com/3d-models/m-84-main-battle-tank-a6839bb9b0d7403aa80951c31d76fe18
3Dimitrije as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
https://sketchfab.com/3d-models/1984-uro-akovic-m-84-141ef5a5934742329b7d618c2e004f92
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
110 downloads
(2 reviews)0 comments
Updated
-
M-84AS / M-84AB1 Yugoslav MBT
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M-84AS / M-84AB1 Yugoslav MBT model
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please change the XXX with the correct number from your //Soundlist:
[SoundList]
SoundFileXXX=PKT762
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
SoundFileXXX=grenade
[PKT762]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[grenade]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Nightshade/PR for searching information for the tank blueprint.
AleksejFonGrozni as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
https://sketchfab.com/3d-models/m-84-main-battle-tank-a6839bb9b0d7403aa80951c31d76fe18
3Dimitrije as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
https://sketchfab.com/3d-models/1984-uro-akovic-m-84-141ef5a5934742329b7d618c2e004f92
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
101 downloads
-
M106A3 mortar carrier
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M106A3-MC model with 14 textures
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=50cal
SoundFileXXX=Mortar
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[50cal]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[Mortar]
Priority=NORMAL
Looped=FALSE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Big thanks to guuruu for fixing my mortar dataINI and adding these explosion effects and everyone who replied to my question and offered to help
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
99 downloads
(2 reviews)0 comments
Updated
-
M106A3-NC (No Crew)
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M106A3-NC (No Crew) model with 14 textures
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=50cal
SoundFileXXX=Mortar
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
[50cal]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[Mortar]
Priority=NORMAL
Looped=FALSE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Big thanks to guuruu for fixing my mortar dataINI and adding these explosion effects and everyone who replied to my question and offered to help
compufat for making most of the texture for the model Thanks a lot for your help as always
Thanks to however made the sounds and Effects as I don't know their names.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
60 downloads
-
Download Statistics