Strike Fighters by Thirdwire

Dassault Super Etendard & Super Etendard(M), SF2 Combo Pak (by FoxMonter)
 
For SF2, Any & All (Full-4 Merged Prefered - At Minimum, =MUST= have SF2:I AND SF2:V)
 
*Note: the reason for these requirements are the cockpits used on =BOTH= versions of the aircraft. They reference 2 very different cockpits and avionics displays, only truely available in a Full-4 Merged installs.*
 
*Note x2: There are 2 seperate readmes in this Combo Pak - one each for the Super Etendard and Super Etendard (Modernized). It's suggested that after downloading this pak, you unzip to a temp folder or your desktop, and =READ= both before installing, as well as this complete readme. Install instruction are, as usual, the same*
 
This package contains 2 complete aircaft - the early version, Super Etendard as used by the French Navy and Argentinian Navy, and the late 90s to-date version, the Super Etendard (Modernized) as used only by the French Navy. All skins, inis, decal, weapons, etc are included. Specific details for each are in their own readmes, inside this archive. You'd do well to read BOTH!!! (no kidding! really!!) All new SF2-style hangar & loading screens are included (exceptng the SuE loading, it's the orignal converted to jpg).
 
As always, fairly easy to follow, detailed install instructions are included. So, please read them!! I'd reccomend that you unzip this archive FIRST (to a temp folder or your desktop), and READ through this readme document, and the other 2, before installing.
The extensive "Notes" section in each readme also contains a Change List of modifications and other impertinant information. All original readmes are included, for historical reference.
 
Happy Hunting!
wrench
kevin stein
 
EDIT: updated 10/13/2011
-- added the missing Tank_SUE_Gray
For thos that already downloaded this pack, the tank in availalbe in the SF2 Weapons downloads section

EA-6B Prowler, for SF2 by Hawker, Agemmenon & 331KillerBee
 
= For SF2, Any and All (but designed for Full-5 Merged and/or SF2:NA) =
 
*It should work fine in non-SF2NA installs*
 
REMINDER: you =MUST= install this update package to the original download. The location URL and Full instructions ™, are below in the "To Install" section. It is also HIGHLY reccomended you read this entire document, after unzipping but BEFORE installing over the original download. There are a couple of extra steps you'll be taking...
 
The package builds further on the original SF2 conversion done by 331KillerBee, and expands the usable skin set "a bit."
Included is a mix of early Hi-Viz markings, and later Lo-Viz markings. They've been diferentiated by a "guesstimated" transition year of 1985, when the LoViz automaticlly appears. The HiViz skins are listed normally; the LoViz have the "lo" suffix. Decal randomization is set to TRUE.
 
Skins contained herein are:
 
HiViz -
 
VAQ-132 "Scorpions"
VAQ-134 "Garudas"
VAQ-140 "Patriots"
VMAQ-2 "Death Jesters" (later version?)
VMAQ-2 "Playboys" (early - folder is called Playboy)
 
Lo-Viz -
 
VAQ-130lo "Zappers"
VAQ-135lo "Black Ravens"
VAQ-136lo "Guantlets"
VAQ-138lo "Yello Jackets"
VAQ-139lo "Cougars"
VMAQ-1 "Banshees"
 
 
The folder and main ini have been renamed "EA-6B_AH" (for Agemmnon & Hawker) to keep this aircraft seperate from the stock TW EA-6B version that comes with SF2:NA. To further differentiate it from the 3W model, on the Aircraft Selection Drop-down, it will read as
"EA-6B Prowler ICAP II" (KB's work -not mine!)
 
The install method being used here will cause you to do a few more steps =BEFORE= installing, but they are all outlined in the "To Install" section. The new carrier lines for SF2NA have been added, but for End Users without SF2NA, it should pose no issues for use. The earlier Game Engine will simply ignore them. You will still be able to set them for carrier usage via the mission editor or campaigns.
 
As always, fairly easy to follow, yet detailed install instructions are included. Please read them! The Notes section contains further details, descriptions, elightenments, illuminations, and so forth. Be good to read them, too.
No, seriously ... unzip this archive and =READ= everything first!!! It's exceptionly important you do so....and equally important, to follow the instructions exactly as I've given them to you!
 
With thanks to all the skinners and ini dancers to kept this old mod from disappearing! KB's original readme is included, as are one or two from the skin downloads.
 
Happy Jamming!
wrench
kevin stein

KA-6D Refuling Intruder, for SF2 by The Intruders
= For SF2, Any and All (meaning: Full-5 Merged and/or SF2:NA) =
 
This is a semi-complete mod, with almost everything needed to unzip and install. All aircraft inis, lods, new drop tank, etc are included. However ... the cockpit, other than an RWR bmp is NOT! You'll have to supply your own, as outlined in posts on the CA Message Boards. You must also have 1stGen WoV or WoE in your possession to extract the necessary cockpit parts to install to this mod. All I've suppled are the updated inis, and the single RWR bmp (that replaces the dash clock). You must also have the original 1stGen Download of this aricrat to install this Pak to. See "To Install" for more detailed instructions. And follow them to the letter!
 
A wealth of skins are included in the pak; pretty much ALL the 1stGen KA-6 skins I could find. Most, if not all, are the work of AllenJB & Paul Nortness. You'll have, in Full Color:
 
VA-35 (USS Nimitz?)
VA-35cs (USS Coral Sea)
VA-42 (USS Forestall)
VA-52 (USS Kitty Hawk)
VA-65 (USS Independence)
VA-65e (USS Enterprise)
VA-115 (USS Midway)
VA-128 (no ship listed)
VA-145 (USS Ranger)
 
In Lo-Viz markings:
 
VA-35lo (USS Saratoga)
VA-42lo (USS Forestall)
VA-52lo (USS Kitty Hawk)
VA-75lo (USS John F. Kennedy)
VA-85lo (USS Enterprise)
VA-95lo (USS Abraham Lincoln)
VA-176lo (no ship listed)
VA-185lo (USS Midway)
VA-196lo (USS Coral Sea)
 
All Lo-Viz skins have a default start date of 1985 (my best guess as to the date-of-transition. Feel free to correct, and post the actual date). Decal radiation is set to TRUE for all skins, due to they're extreamly low amount (4-5 Modex/BuNum) per aircraft.
 
All inis have been brought as close as possible to the latest (3/2012 and/or SF2:NA) standards. The FM remains untouched, but small changes in the Data INI add manually folding wings (Shift/9), and I've adjusted the auto deployment speeds for the refueling drogue. The avionics have also been slightly adjusted.
Again, there have been some statement added that may only work with installs patched to 3/2012 and/or SF2:NA. Use in other, earlier dated installs is at the End Users risk.
 
It should be noted, as AFR is NOT supported in-game, this aircraft mostly exists as "Eye Candy", to be seen parked on deck, airfield ramps, and just flying around turning jet fuel into noise.
 
As always, fairly easy to follow, yet detailed install instructions are included. Please read them! The Notes section contains further details, descriptions, elightenments, illuminations, and so forth. Be good to read them, too.
No, seriously ... unzip this archive and =READ= everything first!!! It's exceptionly important you do so....
 
Happy Landings!
wrench
kevin stein

MiG-9 "Fargo" (by Timmy & Lexx_Luthor) -- SF2 UpDate Pak
 
= For SF2, Any/All (Full 4/5 Merged Reccomended) =
 
An upgrade pack for Timmy/Lexx_Luthor's early Soviet Jet Fighter. This mod will replace any others, including the one I did several years ago. This'll give another early 1stGen Jet Fighter for the Red side, for whatever use you see fit to put it to.
 
This is the complete aircraft package, with a new cockpit - a slight modification of Stary's Mig pit-, all new 90% SF2 compliant FM, and 7 skins (all the ones I could find). All weapons (ie: the drop tank) are included. You should already have the necessary guns, so they are not supplied. A pilot figure and seat are also included, as are new Hangar and Loading screens. Also new are dds damage textures.
 
The skins are basically the same as when first released, with the additon of a nicer natural metal Soviet by p10ppy (shown in the accompanying screenshot). The Soviet skins have been renamed slightly. Check the drop down on the loadout screen for the selection. Included is Timmy's fictional Polish AF camo*. Where necessary, all decal inis have been pointed to stock items; decal randomization is set to TRUE for all skins.
*Please note, the Polish skin references bort numbers that may only be available in SF2E*
 
As always, fairly easy to follow, yet detailed install instructions are included. Please read them! Don't forget the 'Notes' section for other usless information, clarifications, and general ramblings.
For historical purposes, the Original Release Read-me is included. Other credits are listed further down this (the readme) document.
 
Happy Landings!
wrench
kevin stein

MiG-21F Fishbed-C, Fuerza Aérea Revolucionara (Cuba)


 
 

= For SF2, Any and All, Merged or Not, With Access to MiG-21F =


 
As stated above, you MUST have an install that has the MiG-21F in it. As this is pretty much ALL installs, it should work in all types, merged or not. It also assumes you've made the aircraft flyable. If not, consult the CombatAce Knowledge Base for instructions.
 
The skin is a base natural metal with a partly repainted (from a partial template) tail bmp to add the FAR rudder flash. The stock in-game Bort number decals are used, as all the photographic evidence seems to point that way. (in fact, other than the repainted tail bmp, everything is stock!)
 
The latest (as of 1/11 patch) _data ini is included, as I've activated the canopy, and included a modified Loadout ini, that adds the centerline drop tank to the base Air-to-Air loadout, and reset the RECON loadout. The engine sound has been set to the old TMF "MiGEngine.wav" (not supplied), but there are several good/better ones out there for you to find.
A replacement main ini (MiG-21F.ini), and a NEW avionics ini that activates the gun-ranging radar are included. When installing allow for the overwrite. Any other skins will be automatically added (so, not to worry!)
 
The canopy is activated via a manual animation key (use shift/0 to open and close it). As all the decals used are stock, there are no additional decals to be added.
 
As always, fairly easy to follow, highyl detailed install instructions are included. So, please read them ....
 
Wrench
Kevin Stein

MiG-15bis Fagot-B, Fuerza Aérea Revolucionara
 
= For SF2, Full-4 Merged, PLUS Expansion Pak 1 =
 
As stated above, you MUST have -at minimum!!- SF2 (full-4 merged) plus and/or SF2I with Expansion Pak 1, as this added the 15bis to our aircraft stable. As I have a full-4 merged, plus both expansions, I can't say for sure it's available any other way.
 
The skin, is a base natural metal, with a partly repainted (from a partial template) tail bmp to add the FAR rudder flash. The stock in-game Bort number decals are used, as all the photographic evidence seems to point that way. (in fact, other than the repainted tail bmp, everything is stock!)
 
The latest (as of 1/11 patch) _data ini is included, as I've activated the canopy, added a different pilot (my craptastic PilotER), and a seat ("liberated" from Pakso's old version -- fits quite nicely, too!) for him to park it on. The 'main' ini is also included, as I've included Ordway's Mig Pit, making the aircraft player-flyable (as if you all haven't done that alreadly!). The engine sound has been set to the old TMF "MiGEngine.wav" (not supplied), but there are several good/better ones out there for you to find.
 
The canopy is activated via a manual animation key (use shift/0 to open and close it).
 
As always, fairly easy to follow, highyl detailed install instructions are included. So, please read them ....
 
¡Aterrizajes felices!
 
Wrench
Kevin Stein
 
(hope the translation came out ok! or at least right!)

F-80 Shooting Star, Fuerza Aérea Colombiana (Columbian Air Force) for SF2
 
= For SF2, Any/All Versions =
 
A new skin for the recently released F-80C Shooting Star by erikgen. The aircraft is available at the following url:
http://combatace.com/files/file/13411-sf2-lockheed-f-80crf-80ct-33a-shooting-stars-pak-by-erikgen/
 
This skin represent the 15 aircraft the FAC used in the 10° Escuadrón de Caza-Bombardeo from 1958 thru 1966.
Like the other Shooting Stars, the skin is in dds format, and the decals are Randomized.
Weapons, sounds, pilot figures, etc are =NOT= included; they are in the 'base pak' linked above. You WILL need them!!
 
As always, fairly easy to follow, detailed install instructions are included. So, please read them.
 
Happy Landings!
wrench
kevin stein

A-6E TRAM (aka "A-6E_79) Skin Pak 1
 
= For SF2, Full-5 Merged Required; and/or SF2:NA -ONLY!!- =
 
Again, as stated above this is for the stock 3rdWire A-6E_79 ONLY!! If you do not possess SF2NA, DO NOT download this mod, as you will =NOT= be able to use it.
 
The skin pak is designed to be used with my A-6E_79 Upgrade/Fixit/WhatHaveYou Pak, located here at CA at the following URL:
 
http://combatace.com/files/file/12760-3w-a-6e-tram-upgrade-kit/
 
The shins herein are conversions from the 1stGen A-6E Tram by MontyCZ. I'm really not sure who created the original skins/decals, but suspect it may have been Paul Nortness. The Lo-Viz skins are new creations, from the TRAM template I created a few weeks back, and the stock 3W Gray/White skin is used for VA-128, so =ONLY= the decals are being reused.
 
The skins in this pak are:
 
=Standard GullGray/White:
 
VA-128 "Golden Intruders"
 
=In Lo-Viz:
 
VA-42 "Green Pawns" (called VA42lo)
VA-52 "Knight Riders" (called VA52lo)
VMA-533 "Hawks" (called VMA533lo) as seen during Desert Shield/Storm when based in Bharain.
 
There is no "StartDefaultDate=" line for the Lo-Viz skins, as yet. When more have been created/converted, then it's suggested to add that line to the textureset inis with the date of 1985. That's a fair apporximation of the transition. For now, you'll just have to
select them from the drop down on the loadout screen.
 
Some of the decals have been modified from their original form to give a better 'fit' on the 3rd Wire model. To that end, some will notice the checks on the rudder for the Hawks is a seperate decal, whereas it was a single piece before. For the "Knight Riders", I've tried as best as possible to get the notch on the knight's helmet to line up with the position light (same as in Real Life; the light represented the Knight's eye).
 
Decal Randomization is set to TRUE, but be advised of some oddities; these may be caused by the lack of a full squadron's numbers (TK has always reccomended a minimum of 18) or something odd induced by NA or 3/2012 patch. I personally suspect it's the lack of numbers.
 
As always, fairly easy to follow, yet detailed install instructions are included. Please read them before installing!
 
Happy Landings, and Good Hunting!
wrench
kevin stein

A-1H "Skyraider" VA-52 Skin Pak


 
 

-- For FULL-4 Merged SF2 (Prefered) and/or SF2:V =ONLY!!!= --


 
(it can acutally be used in any SF2 install that has the access to the A-1H)
 
This pak will add a new skin/decal set for the stock 3rdWire A-1H Skyraider. It represents aircraft from VA-52 "Knightriders" from the USS TICONDEROGA ~ August, 1964, during the time of the attacks on the US Destroyers, and the "Flaming Dart" retalitory raids.
It is designed to add to the "A-1H Update Pak" released some months ago. You can find the update pak at CombatAce, at the following URL:
 
http://combatace.com/files/file/11249-3rdw-a-1h-skin-and-ini-update-pak/
 
A highly reccomended mod, if I do say so meself <grin>
 
As always, READ the enclosed readme for full, detailed instructions. This package has been broken down into the various folders that SF2 needs, to make it a LOT easier to install (read: drag and drop).
 
Good Hunting!
Wrench
Kevin Stein

A-1H Skyraider VA-65 Tigers Skin Pak
 
-- For SF2, Full-4 Merged (Prefered), and/or SF2V --
 
(it can acutally be used in any SF2 install that has the access to the stock A-1H)
 
This skin/decal represents VA-65 Tigers as seen in 1962/63 when based USS ENTERPRISE (CVAN-65) during her Mediterranean Cruise and "Caribbean Cruise" of Oct/Nov 62 as part of CvG-6. All new decals have been created for the various markings and such. (well, not ALL -- some are reused from my other Skyraider skin paks, but you get the idea).
For use with or without my A-1H Skyraider Upgrade Pak. (available in the CombatAce SF2/Skins/Downloads section)
 
As always, READ the enclosed readme for full, detailed instructions. This package has been broken down into the various folders that SF2 needs, to make it a LOT easier to install (read: drag and drop).
 
Happy Landings!
Wrench
kevin stein

Douglas A-1H (AD-6) Skyraider, VA-105 Skin/Decals pak
- For SF2 (Any and All, but Full-4 Merged Prefered*) -
 
*Note: you MUST, at the very least, have SF2:V for the A-1H. Hence, the 'Full-4 Merged Prefered' warning label*
 
This skin pack reproduces A-1H (AD-6) Skyraiders of VA-105 "Gunslingers" circa 1958, as seen aboard USS Essex (CVA-9) as part of ATG-201, during the Beirut Crisis of that timeframe, supporting the US Marines during the intervention.
 
Can (or Should?) be applied to my Skyraider Upgrade Paks, available here at CombatAce.
 
As always, fairly easy to follow, detailed install instructions are included. So, please read them ....
 
wrench
kevin stein

A-1J "Skyraider" Skin and Ini Update Pak


 
 

-- For FULL-4 Merged SF2 (Prefered) and/or SF2:V =ONLY=!!!


 
This package contains inis, full skin and decals sets, a few weapons and a complete cockpit, to make the stock AI-only A-1J "Skyraider" flyable. While the cockpit is not 100% correct (or, more truthfully, close), it does have all the gauges working as they would be in a propeller aircraft. Until such time a a proper AD-7/A-1J pit arrives, this WILL have to suffice.
 
Ini edits include some enhanced AI statements, corrected ammo counts, fuel quantity, on-board countermeasures (chaff and flares for Vietnam era usage) the addition of the running/formation lights on the tail, a landing light, and a working canopy (use Shift/0 to open and close). Wingfold is NOT activated, due to odd movement and placement issues with the outer wing stores locations. At some point in the future, I'll try and get them dailed in properlly, so the wingfold will work and the weapons follow the wing.
 
A new 300 gallon drop tank has also been included, as the LOD lacks the nodes for built-in drop tanks as seen on other SF2 aircraft (even though called out in the data ini, it just ain't there!). And just for extra added enjoyment, the "Special Weapon", as used by VA-25 is also included. Yup, the world (in)famous Toilet Bomb.
 
A new SF2-style hangar screen, and a new loading screen are also included. All decals are new, with correct Modex, squadron codes and BuNums. It should be noted, that in Vietnam era squadrons (and possibly before) most Skyraider units used a mix of AD-6/7 (or A-1H/J after 1961), so these may not be fully historical, as the BuNums reflect only the one type (AD-6 or A-1H) per squadron. But the BuNums ARE 100% accurate for the models they indicate; and in the cases where photos or profile were available, the actual aircraft represented.
 
Skins included in this set are:
 
VA-25 "Fist of the Fleet", USS Coral Sea, 11/1966
VA-115 "Arabs", USS Kitty Hawk, 3/1966
VA-145 "Swordsmen",USS Intrepid 9/1967
VA-152 "Wild Aces", USS Oriskany, 8/1965
 
The new "A-1J.INI" has been edited to move these new skins to the top, and the original 3W "USNGray1" and "USAFCAmo1" to the bottom, making it easier to select the USN/USMC marked skins.
 
As always, READ the enclosed readme for full, detailed instructions. This package has been broken down into the various folders that SF2 needs/requires, to make it a LOT easier to install.
 
Good Hunting!
Wrench
Kevin Stein
 
oppsy edit! I had H, when I meant J!!! Sorry! -w

A-1H "Skyraider" Skin and Ini Update Pak


 
 

-- For FULL-4 Merged SF2 (Prefered) and/or SF2:V =ONLY!!! --


 
This package contains inis, full skin and decals sets, a few weapons and a complete cockpit, to make the stock AI-only A-1H "Skyraider" flyable. While the cockpit is not 100% correct (or, more truthfully, close), it does have all the gauges working as they would be in a propeller aircraft. Until such time a a proper AD-6/7 (or A-1H/A-1J) pit arrives, this WILL have to suffice.
 
Ini edits include some enhanced AI statements, corrected ammo counts, fuel quantity, on-board countermeasures (chaff and flares for Vietnam era usage) the addition of the running/formation lights on the tail, a landing light, and a working canopy (use Shift/0 to open and close). Wingfold is NOT activated, due to odd movement and placement issues with the outer wing stores locations. At some point in the future, I'll try and get them dailed in properlly, so the wingfold will work and the weapons follow the wing. A new 300 gallon drop tank has also been included, as the LOD lacks the nodes for built-in drop tanks as seen on other SF2 aircraft (even though called out in the data ini, it just ain't there!). A new SF2-style hangar screen, and an new loading screen are also included. Almost all decals are new, with correct Modex, squadron codes and BuNums. It should be noted, that in Vietnam era squadrons (and possibly before) most Skyraider units used a mix of AD-6/7 (or A-1H/J after 1961), so these may not be fully historical, as the BuNums reflect only the one type (AD-6 or A-1H) per squadron. But the BuNums ARE 100% accurate for the models they indicate; and in the cases where photos or profile were available, the actual aircraft represented.
 
Skins included in this set are:
 
VA-35 "Black Panthers",USS Saratoga, Med Cruise, 7/1958 (possibly during the Beirut Crisis)
 
VA-85 "Black Falcons", USS Forrestal, 1962 (also possibly on a Med Cruise)
 
VA-176 "Thunderbolts", USS Intrepid, Vietnam War (1st SEA cruise, before the famous "bee and lightning bolt" added)
 
VMA-331 "Killer Bees", circa 1956-59, before transfering to Skyhawks. This one's for Gunny!
 
The new "A-1H.ini" has been edited to move these new skins to the top, and the original 3W "USNGray1" and "USAFCAmo1" to the bottom, making it easier to select these USN/USMC marked skins.
 
As always, READ the enclosed readme for full, detailed instructions. This package has been broken down into the various folders that SF2 needs/uses, to make it a LOT easier to install.
 
Good Hunting!
Wrench
Kevin Stein

SF2 Korean War Era AD-4NL Skyraider (by MontyCZ)
 
= For SF2, Full-5 Merged (Reccomended/Preferred) =
 
This is an SF2/SF2NA upgraded version of my previously released AD-4NL Skyraider. It is designed to replace all my older versions for use in the SF2 environment.
 
This mod represents AD-4NL's from VC-35 "Night Hecklers". The squadron was deployed in various "Dets" of 2-4 aircraft aboard almost all USN Carriers during Korea.
 
The aircraft is fully carrier-capable, with all the SF2NA coding for deck 'parking'.
Skins are still in bmp format, I didn't bother converting them to jpg. Most markings are decals and Modex/BuNums are Randomized. BuNums are accurate for the aircraft variant depicted, but not for the actual ones used by this squadron, as I couldn't run them down; consider them 'generic' for this purpose.
 
All the necessary weapons, effects, sounds and etc are included, as is the NEW Skyraider cockpit by Dels.
Standard Animations keystrokes are used for the canopy (Shift/0) and wingfold (shift/9)
 
As always, fairly easy to follow, highly detailed install instructions are included. So, please read them. Also, give the "Notes" section a read too. There is important information on Night Operations (what VC-35 specalized in)
You may consider this 'Ver.3' of the AD-4NL.
 
Good Hunting!
wrench
kevin stein

SF2 AD2/3 Skyraider
 
= For Your Korean War Flying Pleasure =
= For SF2, Full-4/5 Merged, (Reccomended/Preferred) =
 
*Note: you MUST have SF2:V as part of your merged install. This aircraft references the A-1H lod from SF2V,
and will =NOT= work without it.*
 
This is a mod of the 3rdWire A-1H Skyraider, to the earlier AD-2/3 version as used by the USN and USMC
during the Korean War. It was thrown together as an experiment some long time ago, and I thought you all would like to have it, "just because". The aircraft is supplied with 2 skins:
 
VA-35, "Black Panthers" US Navy, USS Leyte 1950 *
VMA-121 "Wolf Raiders", USMC, Pyongteak, 1950-53
 
This is a complete aircraft (well, minus the Stock Lod ™ of course!), with a new radar-equipped cockpit
by Dels. Skins are still in bmp format, making it usable in all SF2 merged game installs with access to the
A-1H.lod. The skins are new from my Home Grown Templates ™, in the 1950s Dark Gloss Navy Blue; all
markings are decals and are Randomized. BuNums are accurate for the aircraft variant depicted, but not for
the actual ones used by the squadrons; consider them 'generic' for that purpose.
The 'USMC50s' pilot figure, AN/APS-4 radar pod and engine sounds are included. The only weapon included is the 120 gallon drop tank. Bombs and rockets reference those WW2 units from the GunnyPak, and are NOT
included (simple edits can make the stock 3W ones usable, if one has Expansion Pak 1).
 
Wingfold is NOT activated, but the canopy is. Use the Usual Suspect (shift/0) to open and close it. All
lighting is hisotrically correct.
 
As always, fairly easy to follow, highly detailed install instructions are included. So, please read them.
Also, give the "Notes" section a read too. Please.
 
Good Hunting!
wrench
kevin stein
 
 
*note: VA-35 may have actually used AD-4s as opposed 2/3... my references were a little vague on the point*

RDAF Camo SkinPak for F-84G Thunderjet
 
=For SF2, Any and All (Full-4 Merged Reccomended/Preferred,etc)
 
A simple reskin/redecaling for the recently released F-84G Upgrade Pak.
 
This skin represent Euro-style camoflaged Thunderjets of the Royal Danish Air Force. They were painted such (as what little data seems available) during the later years of their service. The skin itself is a repainted/relined version of the 1stGen JRV (Yugoslavian AF) skin by Homer. I just retouched some bits to remove other bits! Full credit goes to him for the skin (wherever he may be).
 
As always, fairly easy to follow, detailed install instructions are included. So, please read them!!
 
Happy Landings!
 
wrench
kevin stein

F-84F "Thunderstreak" Skin and Inis Update Pak


 
 

-- For FULL-4 Merged SF2 (Prefered) and/or SF2:E =ONLY!!!=


 
This ini and skin pak will update your stock F-84F Thunderstreak to a player-flyable aircraft (if you havn't done so already), and adds a new skin representing the 170th TFS, 183rd TFW, Illinois ANG, circa 1961 when the unit was Federalized during the Berlin Crisis.
Also, an update to the stock "USAFSilver1" skin, adding serial and buzz number decals, and repositioning the TAC tail badge. Consider this a 'generic' USAF skin, NOT representing any particular unit. Just 'dressing up' the old girl a little for the dance...
 
New, updated inis have been included; main, data, loadout and avionics, along with a loadout tga and NEW hangar screen. A radar-ranging gunsight has been added (APG-30), and all the lights have been corrected and expanded, adding the landing/taxi light and formation/ID lights on the vertical stab. The canopy has been activated via a manual animation control keystroke; use shift/0 to open and close.
 
Other upgrades included "splitting" the inboard stations into 2 groups, allowing for the historic use the Mk.7 nuclear weapon on the left side, and the drop tank on the right. This loadout is NOT set in the loadout ini (standard bombs are), but is available for player selection from the loadout screen when in game. The Mk.7 weapons ARE included, courtesy of one lindr2's weapons paks. They've been converted for SF2 usage. Nuke effects are NOT included. The cockpit is from Zur's F-86s, with my K-14 gunsight.
 
As always, =READ= the enclosed readme for full, detailed instructions. This package has been broken down into the various folders that SF2 needs, to make it a LOT easier to install. Of course, there's the usual 'Notes" section for explanations, ramblings, and other odd things.
 
Happy Landings!
Wrench
Kevin Stein

SF2 Korean War Era USAF ANG F-84E Skin Pak
 
= For SF2, Full-4/5 Merged (Reccomended/Preferred) =
 
The pak contains 2 new skins for the RussoUK's F-84E, and is designed to be used with my Thunderjet pak found at CA at the following URL:
http://combatace.com/files/file/12300-republic-f-84e-thunderjet-by-russouk-for-sf2/
 
Skins/decal sets included are for the:
 
154th FBS, 136th FBW (Arkansas ANG)
159th FBS, 116th FBW (Florida ANG)
 
All new, 100% historically correct serial and BuzzNumber decals have been created for all skins.Those skins have stars (*) in their number lists next to the ID number, denoting those with 100% positive identification. Those without stars (*) served in the KTO, but I was unable to run down exactly which wing/squadron.
There are only 18 serial/buzz numbers for each aircraft. All decals are Randomized.
Also included is a small update for the 7/8/9th FBS skins; the addition of the squadron patch for the 'paint chip' seen on the Loadout Screen.
 
As always, fairly easy to follow, fairly detailed install instructions are included. So, please read them.
 
Good Hunting!
wrench
kevin stein

F-84G Thunderjet, Imperial Iranian Air Force
=For SF2, Any and All (Full-4 Merged Reccomended/Preferred,etc)=
 
A simple addition for the recently released F-84G Upgrade Pak.
 
This skin represent all aircraft as used by the IIAF during the 1950s and 60s, until they were replaced by F-5As sometime around 1965ish.
 
All new historical serial numbers for the 75 aircraft were created, depicting the 3 squadrons of the Wing that operated them from Mehrabad (like, how hard is it to do 3-01 thru 3-75???).
Decal radomization is set to TRUE, so be at whatever patch level is requried (post May/June/whatever!)
 
As always, fairly easy to follow, detailed install instructions are included. So, please read them!! The expected "Notes" section as well, for those interested.
 
Happy Landings!
wrench
kevin stein

Republic F-84E Thunderjet by RussoUK
=For SF2, Any and All (Full-4 Merged Reccomended/Preferred,etc)=
 
*Expansion Pak 1 may be necessary for WW2 era weapons, if not using the GunnyPak*
 
Some modifications, tweeks, and general fiddlating on Russo's fine F-84E Thunderjet.
 
Skins provided are:
 
36th FBW, USAFE circa 1952 when commanded by Col. Robert L. Scott (yes, that guy!)
49th FBG, FEAF/5th AF, Tageu, Korea circa 1951/53 -yes, the entire group, all 3 squadrons:
7th FBS (Blue/White)
8th FBS (Yellow/Black)
9th FBS (Red/White)
 
All new, 100% historically correct serial and BuzzNumber decals have been created for all skins. It should be noted, that while those for the 36th FBW =ARE= for those aircraft from the 36th, I was unable to pin down exactly which squadron(s) in the Wing.
Some of the 49th FBW skins have stars (*) in their number lists (7th & 8th FBS) next to the ID number, denoting those with 100% positive identification; excepting the 9th FBS, where =ALL= have been 100% positively IDed as serving in that squadron. Those without stars (*) served in the 49th, but not to my full satisfaction as to which squadron. Rest assured, if I say they're correct for The Wing, they are.
 
Like the recently released F-84G, it has a new 'experimental' SF2-level flight model, uses the same Sabre drop tanks, and uses the same manual keyed animation (surprise! Shift/0) to open and close the canopy. It also uses the same sound file, not included. The same 'generic-style' hangar screen from the G is included as well. A userlist is included; it may need some adjustments as to other NATO/MAP users -which are welcomed!
 
As always, fairly easy to follow, detailed install instructions are included. So, please read them!! As always, the usual "Notes" section for other interestering details and stuff.
 
Good Hunting!
wrench
kevin stein

Republic F-84C Thunderjet, 59th FIS, 33 FIW (by RussoUK)
=For SF2, Any and All (Full-4 Merged Reccomended/Preferred,etc)
 
*Expansion Pak 1 may be necessary for WW2 era weapons, if not using the GunnyPak*
 
Some modifications, tweeks, and general fiddlating on Russo's early Thunderjet.
AKA: revamping of my very old F-84B/C mod, refocused on just the C model (Bs did a lot of crashing and self-disassembly, and wound up back at the factory, or on 'fire training')
 
Serial/Buzz number are 100% correct for the 33rd FIW; those marked in the Numbers.lst with a star (*) have 100% positively IDed as being from the 59th FIS. All others are, again, from the 33rd, but was unable to 'attach' them to any specific squadron(s) within The Wing. Decal radomazation is set to "TRUE"
 
Like the recently released F-84E & G, it has a new 'experimental' SF2-level flight model, uses the same Sabre drop tanks, and uses the same manual keyed animation (surprise! Shift/0) to open and close the canopy. It also uses the same sound file, not included. The same 'generic-style' hangar screen from the G is included as well. A userlist is included; as these were ONLY used by the USAF, it may be moot!
 
As always, fairly easy to follow, detailed install instructions are included. So, please read them!! As always, the usual "Notes" section for other interestering details and stuff.
 
Good Hunting
wrench
kevin stein

Republic F-84G Thunderjet by RussoUK
=For SF2, Any and All (Full-4 Merged Reccomended/Preferred,etc)
 
*Expansion Pak 1 may be necessary for WW2 era weapons, if not using the GunnyPak*
 
Some modifications, tweeks, and general fiddling on Russo's fine F-84G Thunderjet.
 
Skins provided are:
 
159th FBS, USAF in Korea
468th SFS, 508th SFW, USAF/SAC, Turner AFB, GA (both by JSF_Aggie)
6th Aerobrigata AMI (originally by Stephan S, with all new decals by me)
Royal Danish Air Force
Portugese Air Force, 20th Squadron
Generic Natural Metal (above 3 by me)
 
All new decals for the RDAF (historicaly correct, but representing no particular squadron) and a 'generic' set of serials and Buzz Numbers for the G-NM are included. As generic in nature, they represent no particular squadron, but these along with the G-NM skin can be used for other NATO operative countries (Greece, Turkey, etc). The 6 ACB skin has several actual, historic serials. These are marked with a star (*) on the number lst. All others ARE those as used by AMI T-Jets, but was unable to lock in a particular unit.
 
Some of the additions/changes are locating the node-name so the nose wheel now piviots for steering, addition of a landing light (nose only), canopy operated via manual animation key (use, as expected, Shift/0). Armor protection has also been upgraded. The avionics have been adjusted to activate the radar-ranging gunsight. A new userlist was also created -it may not be fully accurate, and adjustments are welcomed! Loadouts use WW2 era bombs from the GunnyPak, but is easily readjusted to use those from SF2 expansions 1 & 2. External drop tanks use the everpresent F-86 tanks for those under-fuselage mounts (closest shape and size). A new AN-M81 260 lb fragmentation bomb (from KAW) is included and used for CAS/Armed Recon.
The inner hardpoints have been split into 2 groups, as the G model had a nuclear delivery mode, with a bomb on one inner hardpoint, and a drop tank on the other. These early bombs are available in my 3W F-84F upgrade kit, available here at CA. For mission builders, an "alternative loadout for CAS/Attack/SEAD is included using the Triple rocket racks.
 
As always, fairly easy to follow, detailed install instructions are included. So, please read them!! PLEASE read the extensive "Notes" section ... there's Vital Information ™ on operation uses and glitches that you need to be aware of.
 
Happy Landings!
wrench
kevin stein

IIAF F-86F-40 Sabre Aircraft/Skin Pak


 
 

=For SF2 & SF/SFG/WoV/WoE and maybe WoI @ 08 Levels and above=


 
This package creates a 'nationalized', stand alone aircraft for Zur's F-86F-40, representing Sabres as used by the Imperial Iranian Air Force in the 1960s/70s. aka "Swords of the Shah". Designed to fill in a small gap, between the Imperial Iranian AF prop-jobs (P-47s), and the third sets of jets (F-5A/B/Es and Phantoms; the first set being straight-winged F-84s, and these Sabres that replaced them). This nationalized version was created for specific reasons, outlined in the "Notes" section below.
 
The skin is a basic bare-metal, with serial number decals for 18 aircraft (standard squadron). With information so scarce, some "WAG" had to be used. The number conventions follow those as seen on F-5s and F-4 Phantoms,and a profile I found online, so should be relatively accurate.
 
As always, -READ- the enclosed readme for full, highly detailed, step-by-step install instructions. For those wishing to install to 1st Gen games, =PLEASE= make double damn sure you read the special section for you. I've tried to keep it as simple a possible, while covering all bases.
 
Good Hunting!
Wrench
kevin stein

A-16A 'Attack Falcon'
 
-- For SF2, Full-4 Merged (Prefered) and/or SF2:I ONLY!!! --
 
As stated above, you =MUST= have a Full-4 Merged install, or at the VERY LEAST SF2:I to make use of this mod package, as it references all stock items for the aircraft and cockpit lods that are ONLY found in SF2:I or Full-4 Merged game installs. If you have neither of these, don't download this, as you'll not be able to use it.
 
This is a modification of the F-16 Netz into the proposed A-16A 'Attack Falcon', a specalized ground support aircraft intended to replace the A-10 Thunderbolt II. Those wishing more infromation on it, are encouraged to Google it, and also look at F-16.net.
 
The aircraft has been completely reskinned in 3-tone Euro 1, from a new home-grown template. Markings represent those based a Nellis AFB, Nevada (for weapons testing and integration). All basic inis, skins and decals are included, as is new green painted version of the AIM-9P Sidwinder (just for this mod/skin pak). All markings are decals, with the exception of the Nellis tail stripe. Serial numbers are spurious; taken from another source.
 
In the Loadout ini, several alternate loadouts are listed. These can be accessed from the 3rdWire mission editor screen (for post-Expansion Pak 2 users). With the exception of the green 9P winder, all loadouts use stock items.
 
As always, =READ= the enclosed readme for full, detailed instructions. This package has been broken down into the various folders that SF2 needs/requires/should have, to make it a LOT easier to install. Also, as usual, the expected 'Notes and Other Nonesense' comments by me. Any and all inaccuracies are mine, as we only have the Netz to work from
 
Good Hunting!
Wrench
Kevin Stein

A-12 'Avenger II' by Rhugouvi
=For SF2, Full-4 Merged (Reccomended/Preferred)
 
This is an upgrade package for the Beta A-12 that's been around for several years, with tweeks to bring it more in line with SF2.
 
This package contains 2 skins for the A-12, one each for Atlantic & Pacific Fleets (cause I don't want to show favoritism either way). They are:
 
VFA-105 "Gunslingers"
VFA-192 "Golden Dragons" (The World Famous Golden Dragons)
 
All markings are decals.
 
As this is a Low-Observabale Strike aircraft, with a secondary CAP role, there is no internal gun. However, for those mission profiles that don't require the greatest of stealth (CAS/Armed Recon, Anti-ship & CAP), a 'mission specific' gunpod is included/available with a 30mm GAU-13 cannon, similiar to how it's done for the F-35 JSF. It's suggested you have the GunnyPak installed for the various modern/post-modern prescision strike munitions.
 
All the sounds are also provided, as are new SF2 style hangar and loading screens. The wingfold works (use the Shift/9 key), but the canopy does not. Running light positions have been adjusted, and they follow the wings when folding.
 
As always, fairly easy to follow, detailed install instructions are included. So, please read them .... There are 'Operational Usage Helps' that might be quite usefull in a pinch. Rhugouvi's original readme is also included (in French). With thanks to TMF via Sony Tuckson for use of the F/A-18 Hornet cockpit & avionics.
 
Happy Landings!
wrench
kevin stein