Jump to content
SUBCATEGORIES
    1. Dassault Mirage IIIVE 'Arab Nations' for STRIKE FIGHTERS 2 

      Dassault Mirage IIIVE 'Arab Nations' for STRIKE FIGHTERS 2 
      This is a simple mod of Veltro2K's Mirage IIIV to create a fictional Mirage IIIVE in service with the following Arab Nations in the 1968-1982 timeline;
      Egypt (used as the default nation)
      Jordan
      Lebanon
      Syria
      For all four I've used the superb 'aluminio' skin by torno. 

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the MirageIIIVE folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the MirageIIIVE folder into your Decals folder.
      That's it! I was keen to make this readily accessible to everyone so everything is stock and the F-100D pit is used as it's in every version of Strike Fighters. This isn't accurate so if you've got any of the Third Wire Mirages then it's best to use those pits.

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Thanks to Veltro2K for bringing us the Mirage IIIV and so much more!
      Thanks also to michaelk for his recent MirageIIIV minor update which brought this aircraft to my attention.
      Thanks to torno for the 'aluminio' skin - ¡muy buen trabajo!
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 1 - March 28th, 2023

      68 downloads

         (0 reviews)

      3 comments

      Submitted

    2. Mirage F1EQ-6

      Mirage F1EQ-6
      Iraqi Air Force received 106 F1EQ & 15 F1BQ between 31 January 1981 and 1989.
      F1EQ-6 specifics:
      R550, no R530, S530F, AUF2, CLB4, CLB8 Radio-altimeter Inertial Navigation System Radio-compass VOR/ILS Seat Mk10 RWR Sherloc AAR probe Sycomor, Remora, Caiman, Syrel, Baz-AR, COR2, CC420 pods capability Sycomor gondolas (P0 station, retrofit 1986)  Harold pod RPL201 EFT Intertechnique AAR pod (Shift-1 for Hose-Drogue deployment/retraction, MaxSpeed=550 km/h=300 kts) Patrick LPD1 Laser Designation Pod AS-30L  AM39 Exocet (Fuselage + Underwings) SLAR Side Looking Aiborne Radar Recon Pod Covered units :
      81st Squadron 91st Squadron This addon is and will in all cases remain freeware.
      Released under CombatAce Fair-Use terms.
      Enjoy
      The Mirage F.1 Team

      239 downloads

         (3 reviews)

      1 comment

      Submitted

    3. MirageIIIV Minor update.

      Version 2.0
      Mirage III V Very Minor update, which corresponds to the actual description of the aircraft.
      Flight model & main aircraft data not changed, left as is (as the author, very careful takeoff/landing control is required).
      1.Main engine update (Added Afterburner / Effects).
      2.Cockpit/ Avionics.(In my opinion, since this is still a prototype aircraft).
      3.Default Loadouts.
      Thanks Plane Authors.

      82 downloads

         (0 reviews)

      7 comments

      Updated

    4. Dassault Falcon 50

      There are two models in this package, military and civilian.
      https://en.wikipedia.org/wiki/Dassault_Falcon_50
      https://theaviationgeekclub.com/the-story-of-suzanna-the-modified-iraqi-falcon-50-business-jet-that-almost-sank-us-navys-guided-missile-frigate-uss-stark/
      Special credit goes to my dear friend and brother in arms, Angel.

      260 downloads

         (2 reviews)

      1 comment

      Submitted

    5. Embraer R-99

      Embraer E/R-99 AWACS
      https://en.wikipedia.org/wiki/Embraer_R-99
      Special credit goes to my dear friend and brother in arms, Angel.

      166 downloads

         (1 review)

      1 comment

      Submitted

    6. Re-upload A4D-2 (TW A-4B & Nyghtfall's A-4E pit) 'Rework' with ini fixes

      Re-upload of the A4D-2 with data and texture ini updates submitted by Cliff7600:
      Addition of cockpit visual of refueling probe
      USN & USMC 'Stock' texture numbering not showing
      Inst: All fixes/additions have been made in applicable ini files - just drop 'Object' and 'Sound' folders in main folder and overwrite.
      ** Note - if you have added additional units/skins applicable changes will have to be made to your A4D-2.INI file.
      "Thanks Cliff7600"



      134 downloads

         (0 reviews)

      0 comments

      Updated

    7. E-3A RSAF

      (TMF) E-3A SENTRY RSAF by PeacePuma 
      In the late 1980s the Royal Saudi Air Force purchased 5 E-3A Sentry aircraft which were assembled in the UK with the new CFM56 engines.
      They had a relevant participation in the Gulf War, being part of the more than 300 missions that prevented Iraq from doing something in secret. They are currently based at 6 Wing and No. 18 Squadron of the RSAF
      This mod recreates current and early 90s liveries
      Credits 
      The Mirage Factory...... for the original Aircraft
      PeacePuma ................. addons 3d, skins, decals, ini edits
      Strahi............................ ini edits
      Wrench ........................ approval on behalf of TMF members 

      You must know:
      This mod does not include a virtual cockpit (if you find a suitable one you can include it yourself)
      The engines are not animated as it is just a mod overlay for the false seat technique.
      You must not distribute without permission of its original authors!!!

      PP Mar, 2023

      81 downloads

         (0 reviews)

      5 comments

      Submitted

    8. Su-35I Flanker-E IRIAF

      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      Su-35I Flanker-E IRIAF
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist (If you don't have the WAV sound added) under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=GSH301
      [GSH301]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.4.1
      Fixed nose gear as it was not animated correctly and made it not swivel from its center position to +/- 45 degrees left/right and remains locked
      Fixed Right and left main gears wobbling
      Added the AKU170 attachment point for the R77 missile.
      1.4.0
      added CanopyNodeName=Canopy to fix Canopy ejecting. and added the sound file for the 30MM GSH301 gun
      1.3.0
      Corrected Autolanding. 
      1.2.0
      Corrected the main left landing gear roll correctly. 
      1.1.0
      Corrected VTOL thrust vectoring control when you press ctrl+/-
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Model by g00r00
      I would like to thank Coupi and Compufat for working with alongside me on this project. Work from 3d modeling, texture, data file, and testing. I enjoyed working with each of you on this together.
      YEYEYE for the Cockpit
      I would like to thank Coupi and Compufat this is group work from 3d modeling, texture, data file, and testing it's too hard to say how to get credit for but I tell you that everyone had a hand in this project and without them all you wouldn't have it.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net

      278 downloads

         (0 reviews)

      3 comments

      Submitted

    9. SF2 A-26C Invader Pak (Revamped) by Bobrock, Gerwin & Wrench

      SF2 A-26C Invader Pak (Revamped) by Bobrock, Gerwin & Wrench        3/5/2023
      = For SF2, Full-5 Merged (Reccommended/Preferred) =
      *Note: This a semi=major overhaul of the original A-26C released in 2013. Gerwin has reworked many aspects of the model, and THIS MOD WILL REPLACE ALL OTHER EARLIER VERSIONS!!!  You are advised to move, remove, or delete any other versions of this you have in any/all mod folders. This new packaging covers the WW2 and post-war time frame. *
      *Note: (again!) In 1947, the "A" for "Attack" designation was removed from use, and the A-26 Invader renamed to B-26 Invader (for Light Bomber Squadrons). Also, with the retirement of the Martin B-26 Marauder after WW2, the number was "open for reuse". However, the displayed name on the Single Mission screen will read "A-26C Invader"; as that's what it be. BTW, this is the GLASS NOSED bomber version, with working Norden bombsight. Instructional PDF included.
      The revamp is supplied with 3 skins:
      552nd BS, 386th BG, 9th AF ETO (1944 start date)
      13th BS, 3rd BG (<1950) Korean War Era
      Generic NMF for any time period (10/47 start date)
      All skins are "natural metal", some with painted on national or squadron markings. The Generic NMF marking are ALL decals, and carries post-1947 USAF markings. The serial/Buzz numbers =ARE= correct for this aircraft, but represent no particular unit. This is true for the WW2 skins serials as well. The SF2 "Date Switch" is active, and will change from the WW2 to the post-war skin in October 1947.
      Weapons are =NOT= included; all stock items are used.The engine sound are included, it's been switched to the AvHistory R2600 x2 wav. Each skin has its own Hangar Screen.
      This aircraft is also equipped with a fully functional bombsight/bombadiar position. Included is Kesselbruts pdf on "How To Use the Bombsight". I'd suggest reading it however many times it takes, and to practice, Practice, PRACTICE!!! using it on the Bombing Range Terrain.
       
      The canopy opens with the Standard Animation Keystroke (tm), Shift/0.
      When 'in game', you'll see
      A-26C Invader (BRG)
      on the Aircraft Selection Drop down menu. This, also, will help to differentiate the aircraft from any other Invader you may (or may not) have. It stands for "Bobrock/Gerwin" as they did the real heavy lifting.
      As always, fairly easy to follow, yet detailed install instructions are included. So, please read them. Also, give the "Notes" section a read too.
      Good Hunting!
      Wrench
      Kevin Stein
      from the KAW Team, circa 2013

      784 downloads

         (6 reviews)

      3 comments

      Updated

    10. [Fictional] Lockheed Nighthawk GR.1

      Lockheed Nighthawk GR.1 for STRIKE FIGHTERS 2 
      This is a simple mod of the amazing F-117A by Dels to create a fictional Nighthawk GR.1 in service with the Royal Air Force in the 1989-2010 timeline. I made this for myself but I'm releasing it 'as is' following a request.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the NighthawkGR1 folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the NighthawkGR1 folder into your Decals folder.
      That's it!
       
      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Big thanks to Dels for bringing us the F-117A and for generously uploading the templates.
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 1 - March 8th, 2023
       
       

      107 downloads

         (0 reviews)

      0 comments

      Submitted

    11. Su-35K Flanker-E EAF

      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      Su-35 Flanker-E EAF
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist (If you don't have the WAV sound added) under the Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=GSH301
      [GSH301]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.4.1
      Fixed nose gear as it was not animated correctly and made it not swivel from its center position to +/- 45 degrees left/right and remains locked
      Fixed Right and left main gears wobbling
      Added the AKU170 attachment point for the R77 missile.
      1.4.0
      added CanopyNodeName=Canopy to fix Canopy ejecting. and added the sound file for the 30MM GSH301 gun
      1.3.0
      Corrected Autolanding. 
      1.2.0
      Corrected the main left landing gear roll correctly. 
      1.1.0
      Corrected VTOL thrust vectoring control when you press ctrl+/-
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Model by g00r00
      I would like to thank Coupi and Compufat for working alongside me on this project. Work from 3d modeling, texture, data file, and testing. I enjoyed working with each of you on this together.
      YEYEYE for the Cockpit
      I would like to thank Coupi and Compufat this is group work from 3d modeling, texture, data file, and testing it's too hard to say how to get credit for but I tell you that everyone had a hand in this project and without them all you wouldn't have it.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net

      200 downloads

         (0 reviews)

      0 comments

      Updated

    12. Su-35K Flanker-E PLAAF

      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      Su-35K Flanker-E PLAAF
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist (If you don't have the WAV sound added) under the Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=GSH301
      [GSH301]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Model by g00r00
      I would like to thank Coupi and Compufat for working alongside me on this project. Work from 3d modeling, texture, data file, and testing. I enjoyed working with each of you on this together.
      YEYEYE for the Cockpit
      I would like to thank Coupi and Compufat this is group work from 3d modeling, texture, data file, and testing it's too hard to say how to get credit for but I tell you that everyone had a hand in this project and without them all you wouldn't have it.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net

      314 downloads

         (1 review)

      1 comment

      Updated

    13. Su-35S Flanker-E VKS

      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      Su-35S Flanker-E VKS
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist (If you don't have the WAV sound added) under the Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=GSH301
      [GSH301]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Model by g00r00
      I would like to thank Coupi and Compufat for working alongside me on this project. Work from 3d modeling, texture, data file, and testing. I enjoyed working with each of you on this together.
      YEYEYE for the Cockpit
      I would like to thank Coupi and Compufat this is group work from 3d modeling, texture, data file, and testing it's too hard to say how to get credit for but I tell you that everyone had a hand in this project and without them all you wouldn't have it.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net

      887 downloads

         (6 reviews)

      18 comments

      Updated

    14. Su-35 prototype

      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      Su-35 prototype 901 & 902 
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist (If you don't have the WAV sound added) under the Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=GSH301
      [GSH301]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Model by g00r00
      I would like to thank Coupi and Compufat for working with alongside me on this project. Work from 3d modeling, texture, data file, and testing. I enjoyed working with each of you on this together.
      YEYEYE for the Cockpit
      I would like to thank Coupi and Compufat this is group work from 3d modeling, texture, data file, and testing it's too hard to say how to get credit for but I tell you that everyone had a hand in this project and without them all you wouldn't have it.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net

      531 downloads

         (7 reviews)

      9 comments

      Updated

    15. [Fictional] McDonnell Voodoo FAW.4 - RAF

      McDonnell Voodoo FAW.4 for STRIKE FIGHTERS 2
      This is a simple mod of erikgen's superb McDonnell F-101B Voodoo to give a fictional Voodoo FAW.4 in the markings for the famous 'Treble One' Squadron of the Royal Air Force during the 1960's. This revised upload now adds a second skin (No.74 Squadron) and a nifty fixed in-flight refuelling probe.
       
      BACKSTORY
      Delays in the English Electric Lightning programme and the rather pedestrian performance of the Gloster Javelin encouraged the McDonnell Aircraft Company to offer various versions of their outstanding Voodoo aircraft to the RAF initially with the F.1 single-seater and FAW.2 two-seater for RAF Fighter Command and followed by the FR.3 single-seater reconnaisance aircraft for RAF Germany and the improved FAW.4 two-seater for Fighter Command. Entering service in 1961 the Voodoo FAW.4 served with three squadrons of RAF Fighter Command and supplemented the earlier FAW.2's in the air defence role. Normally armed with two De Havilland Skystorm radar-guided missiles and two Fairey Firestorm infra-red heat-seeking missiles the Voodoo FAW.4's were a quantum leap in performance over the Gloster Javelin and remained a popular type in RAF service right up until their retirement in 1981.
       
      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the VoodooFAW4 folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the VoodooFAW4 folder into your Decals folder.
      3. From the PILOTS folder drag and drop the VoodooIFR folder into your pilots folder (this is the IFR probe so is optional).
      4. From the WEAPONS folder drag and drop the AIM-4K, Skystorm and VoodooFAW4_Tank folders to your Weapons folder.
      That's it!
       
      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Special thanks to the legend that is erikgen for producing the Voodoo in all its variants and to Column5 for the FM.
      Special thanks also to yakarov79 for making the IFR probe for me.
      Thanks also to the creators of the Genie and Falcon missiles that I've tweaked and rebadged (just for a giggle).
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 2 - March 4th, 2023
       
       

      139 downloads

         (0 reviews)

      1 comment

      Updated

    16. [Fictional] Nord Aviation HC-127B Noratlas - USCG

      Nord Aviation HC-127B Noratlas for STRIKE FIGHTERS 2 
      This is a simple mod of the Nord 2501 Noratlas transport aircraft (originally released by Coyote Aerospace in 2021) to create a fictional HC-127B in service with the US Coast Guard in the 1960-1990 timeline. I made this for my own use but a few people were interested in it so I'm releasing it 'as is' and with just a small serial number range.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the HC-127B folder into your AIRCRAFT folder.
      2. From the DECALS folder drag and drop the HC-127B folder into your DECALS folder.
      3. From the SOUNDS folder drag and drop the 'Hercules' file into your SOUNDS folder.
      That's it! 
      Please note that the aircraft is listed as a HC-127B in 'Player Aircraft Type' and instead of creating the USCG as a new nation I have just allocated it to the USN.

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Huge thanks to Coyote Aerospace for bringing us the Noratlas (the original read me is included to give credit to those who participated).
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 1 - Feb 11th, 2023
       

      40 downloads

         (0 reviews)

      0 comments

      Submitted

    17. Spitfire Mk6b / b Trop

      --------------- Spitfire for CombatAce ---------------
      SF2 version 2021
      TurboSquid : original 3D model
      Snapper21 : source file donated to CA
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Spitfire Mk6b
      - Spitfire Mk6b Trop

      144 downloads

         (2 reviews)

      0 comments

      Submitted

    18. F-104JS "Super Starfighter" (what If...) by Wrench

      F-104JS "Super Starfighter" (what If...) by Wrench    1/10/2023
      -- For SF2, Full 5 Merged REQUIRED --
      *** Please note: your game's mod folder/install MUST have access to the stock 3rd Wire F-104G Starfighter to make use of the mod ***
      This is a modification of the stock F-104G into a "What If..." F-104Js Super Starfighter of the Japan Air Self Defense Force. The mod is supplied with 2 skins:
      Blue Camoflague (1982 - 1990)
      Air Superiority Grey (1990 - 2004)
      These skins represent aircraft from the 207th Hikotai, and carry it's tail badge. The SF2 date switch is active, and will change accordingly.
      Skins remain in bmp format. All new "accurate" decals have been created for 24 aircraft (see Notes for more info on JASDF serial numbers). All markings are decals and decal randomization is TRUE. All weapons used are stock in-game items, excepting the "F104S pylon set". This has been edited to not conflict with the AMI or Turkish F-104S series. All items have been included (cockpit, avionics displays, etc) for ease of installation.
      As always, =READ= the enclosed readme for full, detailed instructions. PLEASE read it!!!
      Happy Landings!
      Wrench
      Kevin Stein

      94 downloads

         (1 review)

      4 comments

      Submitted

    19. Mirage F1 CT Standard T2

      Mirage F1CT standard T2
      This mod is dedicated to BPAO, nothing would have been possible without him.
      The Mirage F1CT is a ground attack version of the Mirage F1C200. Following their replacement in the air defence role by the Mirage 2000, the French Air Force had a number of surplus Mirage F1C-200s, and in 1988 it launched a conversion programme to turn these aircraft into interim ground attack aircraft to replace elderly Mirage IIIEs and Mirage Vs. The Mirage F1CT program brought the avionics of the F1C up to the standard of the F1CR, with the radar upgraded with the additional air-to-ground modes of the Cyrano IVM-R, an improved navigation/attack system fitted, with a laser rangefinder fitted under the nose. It was fitted with new Mk 10 ejection seats, while improved radar detection and warning devices, chaff/flare dispensers, and secure radios were also added. It gained the ability to carry a variety of air-to-ground weapons, including rockets, cluster bombs and laser-guided bombs, while retaining the F1Cs air-to-air armament (Wikipedia).
      F1CT2 specifics:
      R550, no R530, S530F, AUF2, no CLB4, no CLB8 Radio-altimeter Inertial Navigation System Seat Mk10 RWR Aigle AAR probe Laser ranging and sensing TMV632, can sense illuminated targets for LGB (but no self-illumination) Barax, Barracuda, Phimat, Corail gondolas (P0 station)  CC420 pods capability RPL201 EFT No left gun Double wingtip position lights A big thank to all on Combatace and C6 forums that helped us solving issues we encountered.
      Any omission in credits is totally unwanted, if I forgot somebody, let me know, I will correct this.
      This addon is and will in all cases remain freeware.
      Released under CombatAce Fair-Use terms.
      Enjoy
      The Mirage F-1 Team

      244 downloads

         (2 reviews)

      3 comments

      Submitted

    20. SF2 T-34C Turbo Mentor Pack by Various

      SF2 T-34C Turbo Mentor Pack by Various       1/20/2023
      -For SF2, Any and All-
      As seen in the "Found on my HD" thread on CombatAce, I present the Beechcraft T-34C Turbo Mentor for your edification and enjoyment. Brought to you by a combination of luck and the work of our good friends in Latin America. With a little help by me (grin).
      There are 3 skins/decal sets supplied in this package,
      Argentine Navy:
      Armada (a dark blue overall; 1978-1980)
      Malvinas (2-tone camo, as seen during the Falklands War; < 1980)
      US Navy:
      VT-2 "Wildcats", TAW-5 NAS Whiting Field, Florida
      Skins are in jpg format. Many markings are decals, many are painted on. All skins have accurate serial/modex decals. The USN skin has 18, the Argentine skins 29, and 16 respectively. The Argentine skins use the SF2 date switch to active themselves at the proper time.
      Both canopies are manually operated; the Standard Animation Keystroke(s) are used; shift/0 (zero) for the pilot's window, and shift/9 for the backseat driver.
      When in game you see:
      T-34C TurboMentor (OJ)
      The "OJ" is for the modeler, and will differentiate this T-34C from any others that may or may not be available.
      Be advised, that while tagged as a "T-34C" this is actually a "T-34C-1" which has 4 underwing hardpoints for various ordnance. The C-1 was an export only version, but will work nicely for USN customers/users/flyer/game players over The Range terrain for weapons practice. Or flying for fun.
      As is always recommended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions. PLEASE read them!!
      Happy Landings!
      Wrench
      Kevin Stein
       

      152 downloads

         (2 reviews)

      1 comment

      Submitted

    21. SF2 T-34B Mentor (USN) Upgrade Pack by RussoUK/Wrench

      SF2 T-34B Mentor (USN) Upgrade Pack by RussoUK/Wrench       1/12/2023
      -For SF2, Any and All (Full 4/5 Merged plus Expansion 1 Recommended)
      Modifications to RussoUK's fun little T-34B Mentor (USN) make some major and minor adjustments in skins, decals, data ini and other misc stuff. This is the full aircraft, with all the bits as issued by Russ in the original release. Just in case you don't have said original release, you won't have to go scrambling around trying to find the "weapons" (ok, drop tank) pilots and sounds. Also, because I was/am too lazy to pick out and remove stuff. Easier this way :)
      All new historically correct decals have been created. It should be stated that the serial numbers (BuNums) and Modex numbers, while historically correct, are generic in nature representing no particular base unit or squadron. The SF2 Date SWtich (tm) is active, and will cause the skins to change on particular dates.
      The skins are:
      Navy1 -- VT-1 "Eaglets"(>1965) Aircraft is painted in standard "Trainer Yellow"
      Navy2 -- VT-1 "Eaglets" (<1965). Aircraft is painted white/orange ID panels
      the < and > indicate "before 1965" and "after 1965". As you can see, they represent Mentors from VT-1 "Eaglets" based at NAS Saufley Field, Florida.
      Most markings are decals; exceptions would be wing insignia/nation names on fuselage and/or wings. Other markings are decals, and Decal Randomization is TRUE. There are 18 serial/BuNum numbers for each aircraft; both skins share the same 'pool' of decals. The aircraft keeps all it's original designations, so will appear the same in-game as the original download. When in game, on the Aircraft Selection Dropdown menu, you'll see:
      Beech T-34B Mentor USN (R)
      Hopefully, this will differentiate it from any other T-34B Mentors that may (or may not) be available. The "R" stands for RussoUK, the model maker.
      As is always recommended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions.
      Happy Landings!
      Wrench
      Kevin Stein
       

      89 downloads

         (0 reviews)

      0 comments

      Submitted

    22. T-34A Mentor for Uruguay

      A bit of history. Extract from Facebook page - https://www.facebook.com/399877246768865/photos/a.783005898455996/866828416740410/?type=3

      "In 1976, Fuerza Aérea Uruguaya (Fuerza Aerea Uruguaya - FAU) began to seek a replacement for its North American AT-6 trainers and to complement its fleet of Cessna T-41D primary trainers, which had been acquired in 1969.
      Once the Beechcraft T-34 was considered as a suitable substitute for the "tejanos", to be incorporated into the FAU inventory, these mentors were registered FAU-660 to 684. La Escuela de Aviación Militar (Escuela Militar de Aviación - EMA) I received four planes, these were registered FAU-669, 670, 676 and 677, while FAU kept two planes: FAU-650, 651, 660, 662, 663, 664, 665, 666, 668, 671, 672 and 678, all operating with Grupo de Aviación N° 1. On July 14, 1980, four mentors were acquired by Chilean Naval Aviation, namely a T-34A, serialized FAU-651, and three T -34Bs, which received serial FAU-685 to 687.
      In 1982, when the (Centro de Instrucción y Entrenamiento de Vuelo Avanzado - CIEVA) was created, Group No. 1 of Aviation was designated as an "attack" unit, being replaced from its T-34B by the IA-58 Pucará. In turn, the T-34s were transferred to CIEVA just created.
      With the passage of time, the wear and tear, the accidents and the presumed cuts passed the invoice and the number of operating aircraft decreased considerably, until the point of having only 10 planes available for training at CIEVA and EMA for mid-1989.
      Fortunately, the following year, through a subsidy from the Spanish Government, the FAU received one T-34A that had been withdrawn from the Air Force of that country between 1987 and 1988, and had been stored in very good conditions. These T-34A arrived by boat in Uruguay on March 8, 1991, joining FAU on April 24, with registration numbers FAU-630 to 646.
      In May 1992, two T-34As were transferred to Naval Aviation, these being FAU-630 and 639.
      After 20 years of service, it was considered necessary to modernize the EMA training fleet, so in 1999 FAU awarded a contract for 13 Aermacchi SF.260s to a company in the United States."
      -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
      * In this pack, everything BUT plane´s numbers and skins are not 100% correct as the planes were used mainly as trainers. This should be pretty boring! *
      Anyone is allowed to use the blank skins for other skins without ask me any permission, but don´t forget to share it! 
      -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
      Credits:
      RussoUK - 3D work 
      Wrench - inspiration, support and inside ReadMe text.
      Ideal for Gepard´s awesome terrain "Rio de La Plata". 
      Skins and decals - Me, myself and I
      Have fun!!
       

      48 downloads

         (1 review)

      1 comment

      Submitted

    23. T-34A Mentor for Argentina

      First, my congratulations to russouk2004 for the bird!
      A special thanks to Wrench for the support. 
      The Beechcraft Mentor in the Argentine Air Force
       
      By the mid-50s, the Air Force required a basic trainer capable of replacing the nationally manufactured I.Ae.22 DL and the Fiat G-46, then in service. The choice fell on the modern Beechcraft B-45 Mentor that just three years ago had entered service with the USAF.
       
      The contract signed with the North American company in 1956 contemplated the acquisition of 15 units manufactured at the Beechcraft plant located in Kansas and another 75 that would come in kit form to be assembled at the Military Aviation Factory.
       
      The 15 examples manufactured in the United States arrived in the country in flight on June 20, 1957, while the assembly of the other 75 began in 1959 and ended in 1962. The first example manufactured in Córdoba took flight on 11/1 /1959.
       
      Initially, the Mentors entered service with Training Group I of the I Morón Air Brigade, where they served between 1962 and 1970, later they would move to the VII Morón Air Brigade and finally they would form part of the Military Aviation School. Some copies were in service in the Reconquista Military Air Detachment, between 1962 and 1963, these copies would later go to the Directorate of Development, being re-registered as LQ-..., these devices would go to the EAM in 1969.
       
      In 1979, 50 new 260 hp Continental IO-470-N12B engines were purchased to re-engine the 41 Mentor in operation at that time, the works were carried out in the Material Area of Río IV.
       
      Mentor in action:
       
      Despite being a pure trainer, the T-34 served during the 70s as reconnaissance and aerial observation aircraft in search and attack of insurgent positions during Operation Independence, carried out on the soil of the province of Tucumán and in Operation Torrión.
       
      The last days of the Mentor:.
       
      Between 1996 and 1999, the former LMAASA proceeded to carry out structural reinforcement, avionics renewal and fine-tuning work on 30 still-operable Mentors, this served for a handful of copies to continue flying until the year 2011, at which time they are permanently discharged after almost 50 years of service.
       
      On September 18, 2001, a fatal accident occurred during the baptism flight of the first-year cadets of the Military Aviation School, when one of the aircraft crashed after brushing the control tower with its wing, killing its two occupants. . From that moment on, the fame of the Mentor was undermined, but its operation continued, until on October 8, 2010, the E-046 crashed after taking off, due to a planted engine. Finally, in August 2012, the Air Force decides to decommission the venerable T-34 Mentor.
       
      In 2002 and 2003, two second-hand units were acquired from the Uruguayan Air Force, which in turn had received them from the Spanish Air Force."
      extract from here https://amilarg.com.ar/beech-t-34.html  (What a site!)
      I strongly recommend you to fly it over the fantastic Gepard´s new Rio de La Plata terrain. Thanks boss!
       
      Have fun!!!

      75 downloads

         (2 reviews)

      0 comments

      Submitted

    24. SF2 T-34A Mentor (USAF) Upgrade Pack by RussoUK/Wrench  

      SF2 T-34A Mentor (USAF) Upgrade Pack by RussoUK/Wrench       1/12/2023
      -For SF2, Any and All (Full 4/5 Merged plus Expansion 1 Reccomended)
      Mofications to RussoUK's fun little T-34A Mentor (USAF) make some major and minor adjustments in skins, decals, data ini and other misc stuff. This is the full aircraft, with all the bits as issued by Russ in the original release. Just in case you don't have said original release, you won't have to go scrambling around trying to find the "weapons" (ok, drop tank) pilots and sounds. Also, because I was/am too lazy to pick out and remove stuff. Easier this way :)
      Both the NMF and NMF/Orange skins have been redone with a lighter shade of pale metal, all new historically correct decals. It should be stated that the serial and buzz numbers, while historically correct, are generic in nature representing no particular base unit or squadron. The SF2 Date SWtich (tm) is active, and will cause the skins to change on partucular dates.
      The names in quotations "xxxx" are how they will appear on the game's Drop Down Menu on the Loadout Screen. The skins are:
      NMF (Early - starts Day 1) -- "USAF NMF (Early)"
      NMF/Red-Orange (Late - starts 1959) -- "NMF/Red-Orange (Late)"
      USAF 3-tone SEA came (1965). This is a non-real skin; I suspect the original FSX/? version is based on a Warbird, privately owned Mentor. However, the markings are correct for the time frame. They represent 80th Flight Training Wing at Sheppard AFB.  --- "80th FTW (F)"
      Most markings are decals; exceptions would be wing insignia/nation names. Other markings are decals, and Decal Randomization is TRUE. There are 18 serial/Buzz numbers for each aircraft. The 2 NMFs use a 'pool' of the same numbers. The Camo uses the correct style for the Vietnam Era. The "F" in the title obviously means "fake".
      The aircraft keeps all it's original designations, so will appear the same in-game as the original download.
      When in game, on the Aircraft Selection Dropdown menu, you'll see:
      Beech T-34A USAF (R)
      Hopefully, this will diferentiate it from any other T-34A Mentors that may (or may not) be available. The "R" stands for RussoUK, the model maker.
      As is always reccomended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions.
      Happy Landings!
      Wrench
      Kevin Stein
       

      123 downloads

         (2 reviews)

      0 comments

      Submitted

    25. P-3F "Orion" (Iran) Pak by Florian/stahri/Wrench

      P-3F "Orion" (Iran) Pak  by Florian/stahri/Wrench        1/3/23
      -- For SF2, Any & All --
      This is a mod to Florian's Lockheed P-3C "Orion" martime patrol and anti-submarine aircraft, creating the P-3F as used by the Imperial Iranian Air Force, and later the Islamic Republic of Iran Air Force. Consider this a "new(ish)" airplane. This mod is based on Starhi's work. (thank you!)
      The skin is all new, from Viper63a's enhanced template, and in jpg format. It is, however still based off Starhi's original. All new decals are included. Decal randomization is TRUE (I mean, c'mon -- there's only 6 airplanes!!!!). All markings are decals. All serials are 100% historically correct.
      All sounds, weapons* and various misc stuff are included. (*weapons are the same as the ones included in the recently uploaded P-3C Remod Pack). The SF2 date switch is "on", so in 1979 the IRIAF skin will become active. The only difference is the fin flash.
      As always, =READ= the enclosed readme for full, detailed instructions. PLEASE read it!!!
      Happy Landings!
      Wrench
      Kevin Stein
       

      110 downloads

         (0 reviews)

      0 comments

      Submitted

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..