Fictional Mirage F1AZ for Israel called F1AZI
Skin by Valastur based on the original Ludo Mirage F1AZ and templates so kudos to Ludo and team for such a wonderful mod. Edition of the plane inis also by Valastur.
Valastur 2022

Mod of the superb Mirage F-1AZ from the Mirage F-1 Team to make it look like a fictional fighter plane for the spanish air force.
For the weapons you'll need to have one version of the F-1AZ already installed.
The Weapons were created by the Mirage Factory and therefore not covered by the permission.

INSTRUCTIONS
1. Drop the folders into your Mod folder. If asked to overwrite, click yes.

CREDITS
Big Thanks to the Mirage F-1 team for the creation of this superb mod.
Also thanks to Ludo for allowing me to release it.

ORIGINAL CREDITS
- Aircraft : BPAO and Centurion-1.
- Cockpit : Brain32 and Centurion-1
- Skins : Ace888 and Ludo.m54.
- Decals : Ludo.m54.
- Templates : Brain32, ACE888 and Ludo.m54.
- Avionics and data tweaks : Crusader.
- FM : Baffmeister.
- Interception light : Coupi
- Missiles, rocket pods and seat : Ravenclaw_007.
- Weapons : The Mirage Factory.
- Hangars et loading screens : Ludo.m54.

Kindest regards
ValAstur

Español:
Esta es una skin para el A4-AR Fightinghawk inspirado en el A-4P Skyhawk sin pintar del Grupo V de Caza, mas conocido por su apodo "El Tordillo" debido a su similitud con el caballo. El Tordillo se hizo famoso por deshabilitar el HMS Argonaut y el hundimiento del Sir Tristam en el famoso ataque aéreo de bahía Agradable. El matricula C-222 era bastante divisible debido a su falta de camuflaje y este era a su vez uno de los rasgos mas destacables del mismo
Esta skin solamente está inspirada en la pintura del A-4P matricula C-222, sin embargo puede no ser exacto históricamente en algunos aspectos debido al modelo distinto de la aeronave.
Créditos para Nyghtfall por las plantillas que utilicé a la hora de crear la skin, y para The Banidos Team por la aeronave (mod necesario para el funcionamiento de la skin).
Siéntanse libres de modificar la skin con la única condición de que me den el crédito necesario. Seria un descaro decir que me costo muchas horas de trabajo debida a la sencillez del camuflaje en si, pero si tuvo laburo por mi parte.
Sin nada mas que agregar, suerte y éxitos.
 
English:
This is a skin for the A4-AR Fightinghawk inspired by the unpainted A-4P Skyhawk of Fighter Group V, better known by its nickname "El Tordillo" due to its similarity with the horse. El Tordillo became famous for disabling the HMS Argonaut and sinking the Sir Tristam in the famous Pleasant Bay air raid. The C-222 license plate was quite divisible due to its lack of camouflage and this was in turn one of its most notable features.
This skin is only inspired by the painting of the A-4P license plate C-222, however it may not be historically accurate in some aspects due to the different model of the aircraft.
Credits to Nyghtfall for the templates I used to create the skin, and to The Banidos Team for the aircraft (mod needed for the skin to work).
Feel free to modify the skin with the only condition that you give me the necessary credit. It would be cheeky to say that it cost me many hours of work due to the simplicity of the camouflage itself, but it did take work on my part.
With nothing more to add, good luck and success.

Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M992A2 Field Artillery Ammunition Supply Vehicle model
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
/Please change the XXX with the correct number from your //Soundlist:
[SoundList]
SoundFileXXX=TankEngine
SoundFileXXX=GKTankTrack
SoundFileXXX=50caliber
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[GKTankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[50caliber]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
 
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for helping me with the textures big thank you.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop

If you need any assistance please contact me at 
gkabs@gkabs.net

Hi guys.
Correct attachment of the GBU-40 bomb to the BRU-61 carrier has been made in this patch.
Note: It is only for GBU-40 and it works without any problems.
Setup:Put the Bru-61 file in the weapons folder.

This are 2 replacxement highrez (8K) skins for the G.91Y
those will only work, when my reworked G.91Y mod is installed.
Install:
just extract the 7z file to your D:\Users\***\Saved Games\ThirdWire\StrikeFighters2 NorthAtlantic\Objects\Aircraft\G91Y folder.
Let overwrite existing files. That´s it. ;-)
Credit: @ErikGen original G.91Y & temp, @Soulfreak 8K temps & Decals
 

Third-generation Canberra derived from B.6 as an interdictor.
Fitted with a new forward fuselage with teardrop canopy on the port side,
and Navigator station forward of pilot (early marks had the navigator
behind the pilot). Provision for a ventral pack similar to the B(I)6
with 4 20 mm (0.787 in) Hispano Mk.V cannon, one external hardpoint
under each wing for up to 1,000 lb (454 kg) of bombs or unguided rockets,
LABS (Low-Altitude Bombing System) for delivery of nuclear bombs.
Prototype converted from the only B.5 and first flown 23 July 1954,
72 built including 17 for export and two converted from B.2s.
WHAT's IN:
- a new plane
- 10 skins for all squadrons
- every 72 plane serials made
- screens
- sounds, pilot, weapons
CREDITS:
- Bobrock/Soulfreak: model & original temps;
- Paulopanz: skins, decals, screens, ini tweaks
INSTALL:
- All in Main mod Folder and overwrite
Enjoy.
 

 

This is an standalone F-16 as If Ukraine recieved them starting in 2022. Is based on the Viper Team F-16C Blk25/30 and is basically a repaint with some DATA inis and added the Lightning pod, I added the original readme down there, please read it and pay respects to them. Skin and DATA edition by AngelP. Kudos to him!!
Enjoy!

F-16C Blk25/30 By the Viper Team.
Pit by ravenclaw. (A master piece and you haven't seen nuttin' yet.)
Models by bpao, modified highly by Jat and ravenclaw. (You guys are one hell of a team)
Skins templates by Migbuster (Went back and made even higher res skins...because he could)
MFD panel glass by Stary (Did you know he does terrains and clouds too?)
Units skins by Dave and Jat (I think Jat did like 4 and I did the other 70 or so) lol
Weapons by ravenclaw and GrinchWSLG (Masters of disaster)
Technical adviser, Sony Tuckson (If we got it wrong he cracked the whip!)
Avionics by Jat and Crusader (You cant get anything past Crusader, the best MK1 eyeball in SF)
To install:
Drop into your C:\Users\xxxxxx\Saved Games\ThirdWire\StrikeFighters XXXXX
This project started with a little mod here and there to make the Vipers more modern. FastCargo started the PM thread on 28 Jul 2011 and here we are 10 months later we have this.

This mod is dedicated to Oli (bpao) he started us on this journey and I hope, I really hope, we lived up to his expectations.