Here are the templates for the T-45A for anyone who wants to improve on what I did...Have Fun.
Regards, Pappy

This is a replacement for the T-45A Goshawk skins that have been around for nearly 10 years. I felt they needed to be updates. These skins have
flaws that are inherent to this aircraft, so I apologize. Other than that, I hope you guys enjoy...
Regard, Pappy
 
Any questions or concerns can be sent to me here...

Just a quick errata sheet for the USMC Skyraider skins I released last month, I just noticed a glaring error, ie I had misnumbered the decals in the decal.ini on 3 of the skins I uploaded that is for VMA212 - 251 - 333 causing the tail numbers to be errr rather truncated on the right side of the fin.....ooops !! 
So, here are the 3 corrected decal.ini's for the relevant skins, just rename them ie just delete the names I have put on them for reference, and rename EACH one "Decals" and drop them into the relevant skin folder and allow it to over write the existing decal.ini file if you didnt delete it first of course, oh yes, I had also forgotten to enable the prop decals on those 3 skins so that has been rectified as well.
Totally my bad here, I shall be having strong words with my quality control department , apologies for the error , silly me !!   

After a few request i had, i went ahead to release the blank templates i have done.
3 folders :
1) All white, no black parts, no prop line
2) All white, black parts, no prop line
3) All white, black parts, prop line.
 
So have fun if you wish :)

This is another rework of the available A-1H  Skyraider skins, this time for USMC A-1's same details as the previous upload for the USN versions. 3 of which are generic USMC airframes, the bu numbers etc are also generic as not many A1's were in use with the Marines in Vietnam as most of the squadrons had re equipped with A4's by then.
 
included are 
VMA 212 generic
VMA 225
VMA 251 generic
VMA 331
VMA 333
the reworked data.ini to stop the clipping issue
Decals
All the Sounds needed
weapons 
Pilot ( a different one from the USN one )
lo res screens if you need them
as with the previous skins I have re-enabled the wingfold system,and the canopy so the usual shift-9 for the wings and shift-0 for the canopy
 
Enjoy, fly safe, and give 'em hell.

This is a rework of the available A-1H  Skyraider skins, the project started when I noticed there was a clipping issue on the original user made skins, after the stock aircraft had been made flyable etc. being an OCD sufferer I couldn't live with it, so I had to comb the DATA.INI of the aircraft to find the issue, which I never didi, probably one number out of place , or something of that nature. So I re did the whole data file, using a frankenstien of a couple of the available ones, mainly Wrench's , so worry ye not good campers, very little has been altered, so the A/C still operates as Wrench intended, just NO CLIPPING !!! ................YAY !! RESULT !! HAPPY BLOODY DANCE !! ......
 
Anyhow, I then went on to re do all the skins, utilising the templates from bot Wrench, and Nyghtfall, so a mix and match of those as well, I hope you like and enjoy the results !!
Included are 
VA-35
VA-52 ( two versions, one dirty one clean , the clean one has new decals for the squadron markings made by me )
VA-65 (Early version )
VA-65 ( USS Enterprise )
VA-85
VA-105 ( A really shiny pristine skin ) 
VA-176 (USS Shangri La )
VA-176 (USS Intrepid)
the reworked data.ini to stop the clipping issue
Decals ( of course....no use without 'em as I have altered theDECAL.INI of all the skins , 'cos I like to make trouble harharhar )
All the Sounds needed
Finally the weapons ie drop tanks and the bog bomb, and the Pilot I myself use for this aircraft, oh yes and all the screens, both in hi res, and lo res if you need lo res screens for any reason. 
One final note, on the  VA-176 ( Intrepid ) skin, two of the aircraft have kill markings, I have put the entry to enable those in the DECAL.INI of that particular aircraft, however I have them disabled, as in reality the Bu Numbers of the skins and the Actual aircraft are not the same, and I couldnt be bothered to make the correct bu numbers for thos 2 particular aircraft, however if you do not have OCD, and you want the marking showing ( they are keyed to the correct nose numbers ) the just remove the hash marks in the DECAL.INI
[Decal019]
MeshName=Fuselage
DecalLevel=2
DecalFacing=LEFT
//FilenameFormat=A-1H/VA176a/D/kills    <<<<<<<<<<<<<<<<<<<<<<<<< THAT THERE !!! 
Position=-0.70,0.70
Scale=0.55
DecalMaxLOD=3
Thats about it, please enjoy, and please leave feedback if you like...........................cheers !! 
 
OH yes, I forgot one last thing, I have re-enabled the wingfold system, , yes , yes I know its not perfect, as it leaves the stores hanging in a weightless environment, but hey ho, if ya dont like it, eith re disable it or , simply ignore it !! so canopy opens with SHIFT-0 and the wingfold is SHIFT-9.

2 Skins for Erikgen's Superb RF-101 Voodoo.
 
Please read the readme.

This is a set of Camouflages for Su-34
THIS IS ONLY TEXTURE SET and decals, There are no other files in this pack. This set is for persons who have this aircraft. I know that it is difficult to find this model last times. Do not ask me how to get it cuz I do not know. I got this aircraft many years ago and do not know its fate and why it is not available.
I tried to make the skins as accurate as possible. But some details missed because of the limitations of the model, some details i was too lazy to tune. As all old aircrafts, it has ugly UV map which is hard to use for texturing. Some early cammuflages can be not accurate too much to real aircraft for some details. There is a long "antiblick" strip over white nose on one photo, and the same aircraft has short strip before gray nose at another photo, one aircraft has "no step" dashes, anothe haven't it etc. Сoloration is often very different from year to year and sometimes from an aircraft to an aircraft from the same serie.
If you ask me why there is a chaos in a decal folder, the answer is that there is a chaos only for a first look ;) I used decals from NATO fighters pack and all decals on places which in that pack. I do not like doubles and i do like in my Mod folder. That is why decals not in one folder.
Skins was drawn based on outlines by Mariusz Wojciechowski and real photos.
http://www.mariwoj.pl/

NEW SKINS:
Prototype Su-32 1993
Prototype Su-32 1995
Le Bourget 1997
Russia_1 - Standard modern colors
Russia_2 - Standard modern colors with "No Step" marks
Serial Su-34 2006
OLD SKINS
Aubergine 2011 - old gray skin from pack below looks too black in game. i tuned it and made some decals.
Aubergine 2012 - same with color tunes and some different decals for 2012 with "No Step" marks
===========
BACK UP you original Su-34  folder first.
installation: unpack and copy to your installed Su-34 folder. Be sure to overwrite the decals folder. It is very important! There is a fix for the  UV grid of the original model, cause of which the tail had a reflection of the another. All other decals like numbers are not changed and ruins nothing if you overwrite. If you didnt changed them youself.
===========

I used these files:
Decals:
NATO Fighters 4+
https://combatace.com/files/file/12230-nato-fighters-4-part-5/
By Dave (approved by Dave, January 20, 2016)

I took some skin details like engines, nozzles, marks, from this skin:
Su-34 Skins
https://combatace.com/files/file/14713-su-34-skins/
By WINGSOVERISRAEL (approved by Dave, April 5, 2014)

===========
All the best, bazillius
other skins by other users are here:
https://combatace.com/files/category/565-su-34/