Strike Fighters by Thirdwire

Tornado F3 For SF2:
 
Installation:
Simply extract the contents of the Tornado F3 folder into your Mods\StrikeFighters2 folder.
 
Tornado Team
Main 3d modelling and programming: bobrock
FM and avionics advisors: Crusader, starfighter2
Sounds: Spillone104
Pilots: Aleks, Canadair, Erikgen, NGHENGO, Silverbolt, Spillone104, triplethr3at
Loading screen photo: David Cenciotti
TornadoIDS_Destroyed LOD from NF4+
G-55EUR Pilot Skin by X-RAY
Weapon Models: HiRes AIM-9L skin by ChrisBV
SkyFlash by Mirage Factory
SkyFlash6000 Data by Syrinx
43 Squadron 90th Anniversary Skin by Syrinx
43 Squadron Special Colors Skin by Syrinx
Afterburner TGA by dfang
SF2 Updates and Loading Screens by NeverEnough
 
This is a complete SF2 installation package for the beautiful Tornado F3 by Bobrock and the many talented modders listed above. The Effect Emitters have been updated to January 2011 patch level. The Wingtip Vortices have been changed so they move properly with the swingwing position. The new TorAfterBurnerEmitter utilizes the January 2011 Particle System combined with one of dfang's afterburner tga's to give the model an afterburner plume similar to photos I've found of the Tornado F3 in warp drive. Also included are two additional loading screens of the 43 Squadron Special Colors Tornado F3.
 
To use the additional 43 Squadron Loading Screens, change the line in the Tornado_F3.INI as shown below:
 
[AircraftData]
AircraftFullName=Tornado F3
AircraftShortName=Tornado
AircraftDataFile=Tornado_F3_data.ini
CockpitDataFile=Tornado_F3_cockpit.ini
HangarScreen=F3_HANGARSCREEN.bmp
LoadingScreen=F3_Loading.bmp<<<<Change this to TorF3_Loading.bmp or TornF3_Loading.bmp
 
 
For those of you who have not installed Bobrock's Tornado F3 in the Second Generation Thirdwire sims because there was no SF2 conversion, you owe it to yourselves to take this opportunity to correct that omission. Bobrock's Tornado F3 is really absolutely stunning!

Spitfire MkIXc, No.303 (Kosciuszko Polish) Sqn RAF, 1943-44
 
For use ONLY with SF2 including the Israel Expansion Pack. This will NOT work if you do not have the stock TW Spitfires installed and working.
 
Credits:
 
Model and flight dynamics by Third Wire
Cockpit by Kesselbrut
DEcals and placement by ndicki

BYE BYE Bubba- New Wingman Voices for SFG1
By Renegade
 
This file will allow you to replace all of the stock "Bubba" Wingman voice files with these new sound files I have recorded with a few of my friends. They will provide much more variety to the stock speech files. I am not sure if they will work in SFG2 unless it uses the same speech format.
 
Instructions-
Extract using WinRar to a temporary location.
Backup your original "Speech" Folder in SFG
Drag and Drop these new files into your old
SFG>SPEECH Folder and overwrite the old ones.
Enjoy...
 
Note: These files do not replace ALL of the stock speech files only the wingmen call outs!
 
Thanks goto-
Renegade for the Recording and Voicework
Flasheart and PsychLep for their voices as well.
We had alot of fun making these!
 
*This is my very first upload... please report any problems in the comment section.

This file contains the major gun types used by the combatant nations (UK, USA, Germany, Japan, Italy, USSR, France) in World War Two, along with effects for the specific types of tracer colour used by each nationality.
 
All the credit here goes to gregoryp and Bear of AvHistory
 
As I have had to recompile the original file, please let me know IMMEDIATELY if anything appears incorrect or absent. Thanks!

This goes under the double header since VFA-195 is currently transitioning to the F/A-18E but so far no newe on what the CAG jet may look like so after a request made this based on one of the current schemes (or last one).
 
Eric Johnson 2011
 
Simply drop in your FA-18E folder and go fly. Can work for SF1 except for drop tank textures.

The G 91Y was a tactical fighter-bomber and reconnaissance aircraft capable of carrying out direct support, close interdiction, photographic reconnaissance and air combat missions.
 
Instructions:
This aircraft is for SF2, SF2V, SF2I and SF2E last patch.
1) Unzip the file G91Y.rar
2) Copy Object and Sounds folders into your mods folder (for example: C:\Documents and Settings\MyAccount\Documents\ThirdWire\StrikeFighters2 Europe\...).
For people with 4/3 monitors : remember to change the entries into G91Y.ini for Loading / HangarScreen.
Animation 1: canopy open
In order to open the drag-chute land with the airbrakes open.
As the real one this model can reach speed over the airframe limit , be careful with the afterburner.
 
README file included
Credits:



kreelin for the great FM; thanks a lot Andriam



Spillone104 for the jet sound, photos and suggestions during beta testing



Steve S for the invaluable infos about the cockpit , grazie Stefano



bobrock, Soulfreak, Dave, Canadair, 76.IAP-Blackbird, Veltro2k and Nghengo as beta testers



myself ... 3D, skins, pit, blood and tears.




Thank you very much guys.


Last UpDate 14/03/2011 – Ver.2.0


Various improvements; now compatible with Expansion2


Thank you to Veltro2k, Spillone104, X-RAY, "the test pilot", paulopanz and suhsjake for the kind support as beta tester.


Every part of this mod can be used into others mods only if the final product is free of charge for the community and proper credits are listed into the product itself.


Enrico "ErikGen" Gennari
 

READ THE README
 
requires 7z to open:
 
http://www.7z.org
 
Adobe PDF for the readme:
 
http://www.adobe.com
 
Falls under the Combatace.com Freeware License Agreement
 
Version 1.9 Fixes
-SHARP Pod Added
-Improved Textures from the SF2 Version used.
-Fuel capacity adjusted from the US Navy NATOPS manual.
 
It should be advised that this was designed for SFP1/WOV/WOI/WOE, not Strike Fighters 2 as issues from that game will affect gameplay to varying degrees.
 
If you wish to use this in SF2 DO NOT use this version, go here: http://combatace.com/files/file/9401-super-hornet-package-for-sf2-v19/

READ THE README
 
requires 7z to open:
 
http://www.7z.org
 
Adobe PDF for the readme:
 
http://www.adobe.com
 
Has weapon additions, and skin templates.
 
Falls under the Combatace.com Freeware License Agreement
 
Version 1.9 Fixes:
-Improved Textures from the SF2 Version used.
-Fuel capacity adjusted from the US Navy NATOPS manual.
-SHARP Pod also included including weapondata additions.
 
It should be advised that this was designed for SFP1/WOV/WOI/WOE, not Strike Fighters 2 as issues from that game will affect gameplay to varying degrees.
 
 
If you wish to use this in SF2 DO NOT use this version, go here: http://combatace.com/files/file/9401-super-hornet-package-for-sf2-v19/

READ THE README
 
requires 7z to open:
 
http://www.7z.org
 
Adobe PDF for the readme:
 
http://www.adobe.com
 
-Fixed Laser Target HUD Symbology
 
It should be advised that this was designed for SFP1/WOV/WOI/WOE, not Strike Fighters 2 as issues from that game will affect gameplay to varying degrees.
 
If you wish to use this in SF2 DO NOT use this version, go here: http://combatace.com/files/file/9401-super-hornet-package-for-sf2-v19/

Bf109g-10/U4, I./JG 11, Germany, Early 1945.
 
By this date, JG 11 was equipped essentially with Bf109g-10 and g-14 aircraft.The yellow JG 11 Reich Defence fuselage band should not be confused with the narrower Eastern Front markings. THe yellow rudder should theoretically be accompanied by a yellow band around the nose - the final type of quick recognition markings introduced in early 1945. Needless to say, by this stage, official directives were not always scrupulously respected!
 
Despite the fact that MG151/20 gondolas were rarely if ever fitted to g-10 type 109s, this aircraft has them fitted as standard for all air defence missions.
 
For SF2 only.
 
Credits:
Visual model, flight dynamics and original skin template: Monty_CZ
Cockpit including original paintwork: Kesselbrut
Skin, decals, partial cockpit repaint, ini tweaks and loading screen: ndicki

Bf109g-10/U4, 2./JG 300, Borkheide, September 1944.
 
JG 300 was originally created in July 1943 as a Wilde Sau free-range night-fighter Geschwader, but owing to the high accident rate and the relative lack of success, was
transferred at the very beginning of 1944 to daylight operations.
 
For SF2 only.
 
Credits:
Visual model, flight dynamics and original skin template: Monty_CZ
Cockpit including original paintwork: Kesselbrut
Skin, decals, partial cockpit repaint, ini tweaks and loading screen: ndicki
 
UPDATED! Now includes modified ini files for the Dev A-Team WGr.21 mortar!
Thanks to Capun and Company!
 
For those who downloaded the original version, the necessary inis are also available separately in the Weapons section.

Modified ini files for the Dev A Team WGr21 weapons add-on.
 
You will need to download the original files here:
http://cplengineeringllc.com/SFP1/
Under "Weapons and Vehicles"
 
This will modify the WGr21 projectiles into IRMs, but without the growl or ability to manoeuvre. Use as unguided rockets from a distance of about 800+ metres. Too close and you will find that your probability of missing actually gets higher - we have cheated a bit, in order to try and get as close as possible to the
originals, which detonated automatically between 1000 and 1500 metres after launch, according to fuzing.
 
These are anti-aircraft projectiles, and were not used against ground targets.
 
For use with the JG 300 Bf109g-10 to be found here:
 
http://combatace.com/files/file/11838-bf109g-10-jg300/
 
Many thanks to Cesar 'Capun' Pun and the Dev A-Team for the visual models and skins, and for thinking up the initial idea!

The second of five skin packs for your F8U-1 Crusader. Included in this set are the following squadrons:
 
FAGU- Fleet Air Gunnery Unit Pacific, NAS El Centro,Calif.
VF-124 'Crusader College'
VF-174 'HellRazors'
VMF(AW)-323 'Death Rattlers'
VMF-215 'Fighting Corsairs'
 
A read-me file with installation steps is included.

Bf109g-10/U4, JG 53, Kirrlach, February 1945.
 
By this date, JG 53 was equipped essentially with Bf109g-10 and k-4 aircraft, and had been absorbed completely into the Reich Defence organisation. The black fuselage band was attributed on 20/02/1945 in replacement of the earlier rust-red one.
 
For SF2 only.
 
Credits:
Visual model, flight dynamics and original skin template: Monty_CZ
Cockpit including original paintwork: Kesselbrut
Skin, decals, partial cockpit repaint, ini tweaks and loading screen: ndicki

Here is my cockpit re-paint for the F-111A that comes with the SF2V Ground War Expansion Pack. I don't know the creator of the cockpit as he left the community some years ago. But I give him credit for the beautiful job on the 3D part.
 
Directions:
 
Drop into your F-111A folder and overwrite when asked.
 
Enjoy!

Pack de armas Argentino -Malvinas 1982-.
 
Pack de armas usadas por los aviones Argentinos durante el Conflicto de Malvinas.
Incluye misiles aire-aire y bombas de caida libre y retardadas.
 
TerceraEscuadrilla
 
--------------------------------------------------------------------
 
Argentinean weapons pack -Malvinas 1982 -.
 
Pack of weapons used by Argentine aircraft during the Falklands Conflict.
Includes air-air missiles and free fall and retarded bombs.
 
TerceraEscuadrilla

This is the SFP1 series cockpit (version 1.4) for the Mig-23MF of the Mirage factory which could fire beyond visual range missiles even for foreign countries. Download the Mirage Factory Mig-23 package here:
http://forum.combatace.com/index.php?autoc...p;showfile=5211
 
Mig-23MF cockpit additions made by Richard "Pitts2A" Ordway, Starfighter2, lindr2. Thanks to Armour Dave and Sal for the cockpit
 
 
The Mig-23MF version saw combat in the Middle East with Syria and reportedly had some F-4 and F-16 kills. It was a much improved export version after the previous MS version.
The Warsaw pact, India, Syria, Egypt, Cuba and others used the MF version.
 
Added are features to make it more "developing worldish" including labeling tape, lots of dust and simplified features. It fired radar-guided missiles and so was a BVR threat with its AA-7 Apex missiles.
 
The Mig-23 was the most important Soviet fighter type from the mid-to-late 1970s
 
pilot report http://www.warbirdsofdelaware.com/Airplane...87/Default.aspx
 
Directions:
 
1) Back up your Mig-23MF folder (if present).
 
2) Download the Mirage Factory basic Mig-23s at the combatace address listed above starting with http://www.combatace.com/indexpht etc, etc above.
 
3) Just download the whole filefolder Mig-23MF intact into your aircraft folder as one folder.
 
4) When asked to overwrite say yes.
 
-Finished!
 
5) OPTIONAL: Add Nele's accurate Mig-23MF flight model (data.ini) which is in the NeilFlightModel folder called MiG-23MF_data.ini.
 
Just pop it in and overwrite when asked...back it
 
up as always.
V1.3- I added knobs under the warning panels, added Neles avionics.ini and gave the option for Nele's accurate Mig-23MF flight model.
 
MARCH 2011- Version 1.4. I revised and added some files to hopefully fix some problems some gamers were reporting.

Another collection of various hangars/walls etc aimed mainly at desert type terrain although they can be used in any you like.

Spitfire MkIXc, No.312 (Czech) Squadron RAF, June-July 1944
 
For use ONLY with SF2 including the Israel Expansion Pack. This will NOT work if you do not have the stock TW Spitfires installed and working.
 
Credits:
Model and flight dynamics by Third Wire
Cockpit by Kesselbrut
DEcals and placement by ndicki

Simply drop in the FA-18E folder and go fly
 
March 2011
 
Eric Johnson

Modern RAF Smart Bombs.
 
Includes:
 
-Enhanced Paveway II
 
-Enhanced Paveway III
 
-Paveway IV
 
In order to simulate the fact that these weapons can be either GPS or laser guided depending on what the aircrew decide before dropping them I have included two of each type. One is GPS guided and the other is laser guided. On my RAF aircraft (GR4, GR7, GR9 and Typhoon) that use these bombs I have used the loadout.ini file to load a mix of GPS and laser guided versions of the same bomb to imitate that flexability in the air.
Credit goes to 331KillerBee for his Ordnance Shop II where these weapons have been modified from.
 
Drop the files into your weapons folder to install, easy as that.

Templates for Alouette III.
Fully layered.
Format: psd
 
 
Enjoy!

Ara ALOUETTE III For SF2 By Tracker
 
This pack contains a conversion to SF2 of the Beautiful Alouette III made by Tracker.
All credits goes to the author, i'm just the man who made the conversion.
 
Installation : decompress rar file in a temporary location then put everything in your Mod Folder. After you can go flying !
Warning ! ArgentineNavy must be declared in your terrain's limitednation so as to your chopper's weapons work !
 
Best Regards
Galoub

 
 

This is a "What If" nation missile system based off of the real SA-18 Grouse (or what I could find though internets sources).
 
It is set for the "Taliban" nation for my Afghanistan install but can be adapted of course for any map or nation:
 
[Nationxxx]
Name=Taliban
DisplayName=Taliban
Alignment=ENEMY
Mercenary=TRUE
PilotNameList=NamesMercs.lst
RankList=RanksUSAF.lst
CallsignList=CallsignsUS.lst
Formation.Fighter=USFighter
Formation.Attack=USFighter
Formation.Bomber=USBomber
Formation.Transport=USBomber
Formation.Tank=USTank
Formation.MobileAD=USAD
PilotTrainingStandard=EXCELLENT
GenderRatio=0
DebriefSuccessMusic=DebriefSuccess.wav
DebriefFailMusic=DebriefFail.wav
DebriefKilledMusic=DebriefKilled.wav
SpeechFile=USAFSpeech.cat
SpeechTextFile=USAFSpeechText.str
StartDate=1994
 
It uses Pasko's "SAM Gunner" since I have no modeling skills and is setup for SF2. It can be of course adapted for SF1 but that requires a bit of work that can be found in the SF2 Knowledge Base and is a drag and drop as all files and folders are already organized.
 
Afghanistan rules of thumb:
 
Kandahar-Shindand-Herat-Qala I Naw "ring" stay above 24,000ft MSL + for traveling. When you break that (usually 23,000 ft) you may get shot at. Other areas roughly 22,000 ft MSL + is a good altitude to stay above but again use flares conservatively. It's not very accurate but if enough are fired you will get shot down. I've seen earlier versions of this shred SEAD flights.
 
This is strictly for What If scenarios or installs rather than real world setups as so far there is no heavy use of SAMs in-country.

After finding a good resource I was able to skin this aircraft
 
Able to be used in SF1 as well as the drop tank texture is not required. Simply drop in the FA-18E folder and go fly.
 
Eric Johnson 2011.