Freeware FS2002 \FSX model adapted by me Russouk2004
This model is NOT to be uploaded to ANY site apart from here at CombatAce.com.
This model isnt brilliant but ive spent a long while fixing bits ,remaking bits,altering mapping that used sub objects(more than 1 texture per mesh) as game doesnt support it.
I will upload a base texture with wireframe and labelled parts in day or so...as I couldnt find any templates anywhere..and I did look...ages....
Original model by Rick Piper....
Despite some of the the original readme wording quoted bottom,...this model IS allowed to be shared as its now 100% Freeware,though obvioulsy some rules apply...no back engineering to use parts for something else....just sensible usage.
Only fair use and NON commercial use is ALLOWED...
Model used is not bad,and as I pointed out,took a lot to sort it for SF2 usage...had basically to stitch the meshes together,even polys....
Also included are..
Pilot and Copilot model...
Correct seat...
sounds...
Low poly Distance LOD
Also LOD for those who dont want self illuminated lights...(nav lights and nose light) just replace as required.
Uses Starys Cockpit for the Saab 105,minus few parts I "removed" with ini dance...
I added some of its performance characteristics where I was able to,limited by my knowledge of the flight data in SF2 lol...
anyone wishing to better its flight data go ahead...
also
Lights arent perfect so feel free to fiddle with them...if you desire.and share results
This model has no weapons as its a trainer....if required I can knock up some pylons as later versions did have some before it became the Full Strikemaster version.
any bugs let me know ASAP at CA.....enjoy the A\C and hopefully it well get upgraded....
usual routine....drop folders into Mod folder and appropriate sub folders.
cheers
Russouk2004
original creators credits....
original pilots.......Rick Piper (2004)
original Provost ......Rick Piper (2004)
........................ORIGINAL README..........................
Copyrights
----------
The included files have been tested and have been determined not to be harmful.
However, the authors are not responsible for any direct, consequential or indirect damage these files may cause to you and your computer. Use entirely at your own risk.
Any gauge provided with this panel can not be used in another panel without the permission of its author.
This is FREEWARE. These files are strictly for your own personal, non-commercial use.  Any redistribution, repackaging or reselling of these files in any form is expressly prohibited without the permission of the authors.
Regards
Rick
http://www.btinternet.com/~rick.piper/

Third Wire MiG-23MLD update & flyable for SF2
-    Made flyable with the MLD cockpit and avionics available here at CA by Stary 
-    Leading edge flaps fixed to now automatically deploy during manoeuvring as they did on the MLD with the type 3 wing.
-    Radar data and performance is corrected from the S-23MLA radar to the S-23MLA-II radar as fitted in the MLD.
-    KDS-23 countermeasure dispenser installed in the centreline drop tank pylon. This is a 12 shot chaff/ flare countermeasure dispenser that could be used once the drop tank had been jettisoned.
-    Ejection seat (from ODS mod) and more suitable pilot added.
-    Canopy can be opened and closed.
-    Primary and secondary roles expanded to reflect the evolution of the MLD version of the MiG-23 into a more multi role fighter platform.
-    Loadouts enhanced and corrected. Some Afghanistan specific ones added.
-    Used of Kh-25M air-to-surface missile and datalink pod added.
-    Fuselage AA-8 positions corrected.
-    Removed ECM jammer.
-    Updated weapons from the RSSW 099 mod.
-    Various Soviet- Afghan war skins added.
Drop into your main mods folder to install, OVER-RIDE!!!
CombatAce fair agreement applies.

F-2H Banshee Updated data pack v1.1
This is a further update of the DATA.inis of the RAZBAM F-2H Banshee.
In this updated data pack, there are changes in the data.ini, trying to achieve realistic performance specs.
So changes are done in almost every aspect of the specs (weight, flightdata, engine thrust etc) for being as close to the real thing as possible.
For using this pack you need to have downloaded first

- the original RAZBAM Banshee (Go to RAZBAM website for more details)
- the Banshee Tweeks Pak -for Razbam Banshees of Wrench
https://combatace.com/files/file/14889-sf2-kaw-f2h-2-banshee-tweeks-pak-for-razbam-banshees/
https://combatace.com/files/file/15415-sf2-f2h-3-banshee-tweeks-pak-for-razbam-banshees/
https://combatace.com/files/file/15417-sf2-f2h-4-banshee-tweeks-pak-for-razbam-banshees/
Credis should go to
- RAZBAM for the original release
- Wrench for making this really usable in missions/campaings
- Ravenclaw_007 for the AN-M30 bomb
- Spillone for - at least - some of the sounds

Thoughts for further upgrades
- The AltitudeTableNumData & DryMachTableNumData are really very limited and are restricting realism. Please give me help to correct them. DONE
- The F2H-3 (F-2C) is without wingtip tanks but in reality all the -2,-3,-4 models had the capability of carrying wingtip tanks.
I am planning to substitute the LOD of the -3 with the -4 model (since these two were identical externally) but for doing so I am waiting your feedback.DONE
INSTALLATION INSTRUCTIONS
- Overwrite everything above v1.0. Place the banshee f2h4.LOD (which you can purchase from the RAZBAM website) in your F-2H3 folder.

What's new in v1.1
- The Destroyed Model now it's the stock F-84F one.
- The F3H-3 (F-2C) now uses the F3H-4 LOD. Indeed, the -3 also used more the wing tip tanks than not, since they had a minimal effect on overall performance.
- Further updated engine data.
- Corrected ground clearence for the F3H-2.
- Corrected loadouts. Now the wing pylon can be loaded with bombs (historical).
- Small touches here & there for better overall result.
Issues
- The -4 used a different radar than the -3 model that had also a different radar screen with different symbology (not a successful one, as it often mentioned).
However, it seems that we have the -3 style radar screen for the - 4 model too.
- In some sources it's stated that the -4 had 20% more range than the -3 model. I am not convinced for that.
Most likely it had to do with the need for full throttle/max power more often than the -4 model
in combat conditions, something which indeed reduced endurance. Therefore I kept the same radius for the -3 & -4 models.
- The Canadians seldom used their wing tip tanks. I had a hard time to spot canadian F-2s with wing tip tanks when in actual service.
The most likely explanation is that with the small canadian aircraft was too much to handle the take off of the approx. extra 1 ton of weight with the wingtips on the weak -3 model.
If someone wants a tank-less RCN F-2, I can update the pack. However the final solution will be to add the tanks as loadouts.

***
sQUADRONS
[SquadronXXX]
Name=VF73
DisplayName=VF-73 Jesters
Nation=USN
[SquadronXXX]
Name=VF193
DisplayName=VF-193 Ghostriders
Nation=USN
[SquadronXXX]
Name=VF870
DisplayName=VF-870 of Royal Canadian Navy
Nation=CANADA
Remember this is a freeware!

AH-60 BAttleHawk for Strike Fighters 2
Version 1.0 Release 03/12/2020
This model is not to be used in any commercial or for-profit packages. It may, however, be used in any freeware mod. According to the Combat-Ace terms of use.

Contents:
-Objects-
AH-60 BattleHawk
-Weapons-
Spike NLOS
Spike LR
 
-Decals-
Fictional 124sq

Installation (SF2):
Extract each folder into the matching folders in your mod directory.

Notes.
This model represents a What If Battle Hawk Modification of the UH-60L in service with the Israeli Air Force.  In order to make the model work, you will need a suitable cockpit since the only uh-60 cockpit is from that site. Rivet counters please save energy, this is a What If helicopter based on a proposed modification of the UH-60 and the Arpia IV of the Colombian Air Force (WIP). The models uses Rocket Pods from the At-6 model availabel here (not included)
Credits:
Model:angelp
Skins and textures: angelp
Ini files:angelp
Decals: angelp
Weapons; angelp
 

Incorporates a waypoint marker in the middle of the HUD of the F-35.
 
Installation :
Extract files to Objects/Aircraft/F-35 (Any version) and overwrite when prompted.
If required, rename the avionics.ini file to suit the version, e.g. F-35A_AVIONICS.ini to F-35B_AVIONICS.ini
 
Credits :
Fastcargo - Original F-35A/B/C Lightning II V 2.5 for SF2 pack
JAT81500 - Armée de l'air Rafale Mod for SFP V2 (SteeringCue.tga and Steerpoint.tga)
 

Westland Wessex Hu 5
Royal Navy skin 
 
A re work of the skin for the Wessex HU5 , the aircraft is originally from the A-Team site, so you will ( if you want to fly this aircraft ) have to obtain the files and lods from there, 
This is a complete re do of the whole thing, as I was never happy with the colour, so I have corrected that, I have re drawn all the panels relatively accurately, I haven't bothered with rivet detail as to be honest it doesn't actually show up too well, I have corrected and updated ALL the stencilling, as the original effort was a dogs breakfast to be honest. I have also re done the decals and markings.
So what is included.........2 skins, one for aircraft from 848 NAS who were the squadron in action during the Falklands operation, and one skin for 845 NAS flying off HMS Bulwark in 1966 during the Brunei and Indonesia debacle. I have included the decals for both Squadrons, and also the pilots that I personally use, although green helmets were more the flavour of the day during the Falklands, so feel free to swap out the pilots if that is your taste.
A quick note about the shortfalls of these skins, the aircraft I believe was originally done for SF 1 so it is a little aged, therefore there are some clipping issues you may encounter, I am unable to do anything about this, in reality, we could do with a completely new model of this important aircraft, and hopefully one day it will happen !! So pretty much I have made a silk purse from a sows ear here, the aircraft itself. looks a little "off" I am sure there are some dimension errors, it doesn#'t seem tall enough, and it looks a little bit odd from the front view.....but I could of course be wrong, and the thing is perfect, but I doubt it. The stuff we all are getting used to like working lights and hatches......yeah ok.......not happening on this model, and I forgot to make lights work at least....oh well, such is life !! 
Hopefully I shall do some skins for RAF HC3's next so watch this space for those.
 
As always, ENJOY !! 

NF-5B Freedom Fighter for SF2
This is the Canadair NF-5B

WHAT´S IN:
1 aircraft with 20 brand new skins (only KLU)

CREDITS:
- FastCargo - 3D modeler of the original F-5B
- yakarov79 - heavy 3D work on the specific NF-5B (Thank you so much mate!)
- 331killerbee - sea camo template
- Soulfreak - paintwork, decals, ini dance, screens etc.
- Pilot is a reworked one from Volker´s German Pilot
Special thanks to: Luuk Boerman from www.dutchdecal.nl who provided me great references.
TO INSTALL:
- extract NF-5B.7z into your mod folder
if asked, let overwrite old files.
 
Schapen, March 7th 2020
Carlo "Soulfreak" Vecchi

SF2 DHC-1 Chipmunk Pack       2/25/2020
-For SF2, Any and All (Full 4/5 Merged Reccomended, plus Exp 1)
This is a remake & reissue of the the DHC-1 Chipmunk trainer aircraft first released in 2008 by "Big Al". It has been reworked to bring it more into compliance with SF2 standards, as best as possbile. Be advised, there are a number of issues & flaws; they are enumerated in the "Notes" section.
This is the full aircraft, with all necessary parts. The skin maps, still in bmp format, have been slightly repainted to allow the use of decals for insignia, 'plane-in-squad' letters and serial numbers. Serial numbers, while historically accurate for the version depicted, should be considered generic in nature. Decal randomizaion is TRUE. As exported is TRUE, a user list has been created. It does not list all the Chipmunk's export users. End Users (tm) are encouraged to fill it in as needed.
While this is an exceptionally old model, the canopy does work via standard manual animation keystroke (Shift/0 -zero). Expansion Pack 1 is required for the destroyed model (Spitfire). If you do not have it, you'll have to find another to use in it's place.
As is always reccomended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions. 
Please see the "Notes" section for a list of changes to make the aircraft more SF2 compliant, and certain other explinations. The original release readme, from 2008, is included within the aircraft's main folder.

Happy Landings!
Wrench
Kevin Stein