The purpose of this mod is to improve the ground gun accuracy especially the AA Guns. It changes the game's default ballistic coefficient entries and make better speed retention for trajectory items. Thus it makes guns perform much better for anything flying straight line.
I have included 2 types of data in this mod. Please choose the one that works better for you.
Type A = Ballistic Coefficient changed to 1.1 times, better gun accuracy.
Type B = Ballistic Coefficient changed to 1.2 times, even higher gun accuracy but may influence AI plane in missions.
 
Also included the ballisticdata change program which when open in a folder that contains G1.dat, will allow you to change the entries. 
 
For artillery, in addition to this mod, you can also change the accuracy in the gun data to 125 (yes, you can actually exceed 100)
 
 
Installation:
-----------------------------------------
Extract the G1.dat file under Type A or Type B folder under Objects folder in your mod directory
 
Uninstallation
----------------------------------------
Delete G1.dat file under Objects folder in your mod directory
 

Mikoyan-Gurevich Ye-2PFM "Faceplate-D" for STRIKE FIGHTERS 2 
Released 'as is', this is Mikoyan-Gurevich Ye-2PFM 'Faceplate' - featuring a 3D model by KnightWolf45 (the artist formerly known as Cocas). 
In the mid-1950's the MiG OKB was tasked in developing a new lightweight supersonic interceptor fighter for the Soviet Air Force and flight-tested two distinct designs in parallel - one with a thin, swept-wing and one with a tailed delta wing. The tailed delta would eventually win out to become the famous MiG-21 'Fishbed' but it's tantalising to consider 'what if' the swept-wing Ye-2A prototype had either won or was considered good enough to also be procured. Anyway, this is the swept-wing Ye-2 as it might have looked in service with the Soviet Air Force and I've also included Egyptian, Mongolian and Parani skins. 
Giving the aircraft a service designation is tricky as it was given a provisional designation of MiG-23 but, of course, this conflicts with the swing-wing 'Flogger' that came later. We can't use an even number like MiG-20 or MiG-22 so I've just called it the Ye-2PFM and you can change this to suit your own thoughts on this matter.

INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the Ye-2PFM folder into your Aircraft folder.
2. From the DECALS folder drag and drop the Ye-2PFM folder into your Decals folder.
3. From the WEAPONS folder drag and drop the Faceplate-GP-9 folder into your Weapons folder.
That's it!

CREDITS
As always, thanks to Third Wire for a great little game/sim.
Huge thanks to KnightWolf45 for creating the Ye-2PFM 3D model a few years ago and to the CAF team for any inputs that followed.
Special thanks also to Coupi for sending me his templates that I've used to create the skins.
Thanks to Paladrian for the MiG-21 pit.
And, finally, thanks to everyone in the wider Third Wire community.
Regards 
Spinners
Version 1 - Dec 24th, 2021

Tactical numbers and insignias for stock tanks
*****************************************************
This mod is made for SF2.
----------------------------------------------------------
I.
In the history it was common that tanks got tactical numbers and showed insignias for better friend and foe identification.
This package included modded stock tank files, so that the tanks will show numbers and insignias in single missions and campaigns.
It contains insignias and tactical numbers for:
Leopard A1 to A5
Centurion Shot and Shot Kal
M48 Magach 3
M60 Magach 6
M48A2
M48A3
M60A1
T-34-85
T-54
T-55
T-62A
T-72A
For M48, M60, T-54 and T-55 i added workable anti-aircraft-machine guns. I also changed the armour of some tanks values to make them closer to real world
 
-----------------------------------------------------------------------
II.
INSTALLATION:
-Unzip the object folder into your SF2 mod folder

----------------------------------------------------------
III.
For remarks, comments, bugs, etc please use the forum or send me a PM.
-------------------------------------------------------------
IV.
All  files are FREEWARE. COMMERCIAL USE IS NOT ALLOWED!
------------------------------------------------------

------------------------------------------------------------

Hope you enjoy it.

Michael (Gepard)

Made in Germany
December 2021
 

Mirage F1CH (1983-2007)
 
This mod is dedicated to BPAO, nothing would have been possible without him.
30 Mirage F1CH were ordered from Dassault by the Royal Moroccan Air Force (RMAF) in 1975, with the first deliveries taking place in 1978.
 
F1CH_Late specifics:
same as CH_Early
+ AN/ALE-40 Chaffs/Flares dispenser (control panel on left bench)
+ ELT-### ECM Pod capability
+ AAQ-8 capability
 
Covered unit :
Escadron ASSAD  
A big thank to all on Combatace and C6 forums that helped us solving issues we encountered.
Any omission in credits is totally unwanted, if I forgot somebody, let me know, I will correct this.
 
This addon is and will in all cases remain freeware.
 
Released under CombatAce Fair-Use terms.
 
Enjoy
The Mirage F.1 Team

--------------- Seafire for CombatAce ---------------
SF2 version 2021

TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Ravenclaw_007 : rocket ini
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis. New rockets 3D models and new weapons system ini.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Seafire Mk3
- Seafire L Mk3 w PTO skins
- Seafire Mk3 hybrid (Air Spotting Wing)
- Seafire Mk3 Irish Air Corp
- Seafire Mk3 French Navy

Mirage F1CH (1978-1985)
 
This mod is dedicated to BPAO, nothing would have been possible without him.
30 Mirage F1CH were ordered from Dassault by the Royal Moroccan Air Force (RMAF) in 1975, with the first deliveries taking place in 1978.
 
F1CH_Early specifics:
R550, R530, S530F, CLB4, no CLB8 radio-altimeter Doppler Radar Seat Mk6 RWR BF COR-2 recon pod capability with animated cockpit COR-2 sight  
Covered unit :
Escadron ASSAD  
A big thank to all on Combatace and C6 forums that helped us solving issues we encountered.
Any omission in credits is totally unwanted, if I forgot somebody, let me know, I will correct this.
 
This addon is and will in all cases remain freeware.
 
Released under CombatAce Fair-Use terms.
 
Enjoy
The Mirage F.1 Team

Hello and thank you for downloading my work.
What's included:
Two USMC USA, NATO, and Israel M109A2 howitzer models one with the Spades up and the other is down.
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please change the XXX with the correct number from your //Soundlist:
[SoundList]
SoundFileXXX=155MM_M126
SoundFileXXX=TankEngine
SoundFileXXX=GKTankTrack
SoundFileXXX=50caliber
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[GKTankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[155MM_M126]
Priority=NORMAL
Looped=FALSE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[50caliber]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
 
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for helping me with making these textures big thank you.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.

Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop

If you need any assistance please contact me at 
gkabs@gkabs.net
Site
https://gkabs.net
https://gulfknights.net

--------------- Seafire for CombatAce ---------------
SF2 version 2021

TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Seafire Mk1b
- Seafire Mk1b w Vokes filter
- Seafire Mk2c
- Seafire Mk2c w Vokes filter
- Seafire LF Mk2c