Jump to content

Strike Fighters 2 Series by Thirdwire


Sub Category  

All SF2 Series Simulation Modifications and Add-Ons

SUBCATEGORIES

    1. Flakpanzer Gepard Anti-aircraft gun tanks

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      Flakpanzer-Gepard AAA model
      Flakpanzer Gepard
      The Flugabwehrkanonenpanzer Gepard is an all-weather-capable German self-propelled anti-aircraft gun. It was developed in the 1960s and fielded in the 1970s, and has been upgraded several times with the latest electronics.
      Type    Self-propelled anti-aircraft gun
      Place of origin    West Germany
      Specifications
      Mass    47.5 t (46.7 long tons; 52.4 short tons)
      Length    Overall: 7.68 m (25 ft 2 in)
      Width    3.71 m (12 ft 2 in)
      Height    Radar retracted: 3.29 m (10 ft 10 in)
      Crew    3 (driver, gunner, commander)
      Armor    conventional steel
      Main
      armament
      2 × 35 mm Oerlikon GDF autocannon, each with 320 rounds of anti-air ammunition and 20 rounds of anti-tank
      Secondary
      armament
      2 × quad 76mm smoke grenade dischargers
      Engine    10-cylinder, 37,400 cc (2,280 cu in) MTU multi-fuel engine
      830 PS (819 hp, 610 kW)
      Power/weight    17.5 PS/t
      Suspension    Torsion bar suspension
      Operational
      range
      550 km (340 mi)
      Maximum speed    65 km/h (40 mph)
      https://en.wikipedia.org/wiki/Flakpanzer_Gepard
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
      [TargetTypeXXX] <-------- Change to the next number at the bottom of you types list
      Name=GK-Flakpanzer-Gepard
      FullName=GK-Flakpanzer-Gepard
      TargetType=AAA
      ;TargetType=MISC
      UseGroundObject=TRUE
      GroundObjectType=ZSU-23
      ActiveYear=1960
      TargetValue=25
      RepairRate=3.22
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DestroyedEffect=SmallRocketGroundExplosion
      DestroyedModel=Truck_DESTROYED.LOD
      SecondaryEffect=VehicleFireEffect
      SecondaryChance=100

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Coupi for making all the data files and testing the model.
      compufat for making the Brazilian skin.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Vidoe by Coupi

      212 downloads

         (0 reviews)

      1 comment

      Updated

    2. Volkswagen Type 3

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      VW T3 model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
      [TargetTypeXXX] <-------- Change to the next number at the bottom of you types list
      Name=VWT3
      FullName=GK-VWT3
      ModelName=GK-VWT3.LOD
      TargetType=MISC
      ActiveYear=0
      TargetValue=50
      UseGroundObject=TRUE
      GroundObjectType=GK-VWT3
      DamagePoint=140.0
      ArmorValue=24516080.0
      ArmorType=2
      RepairRate=0.150
      StartDetectChance=20
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      CollisionMesh=
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=BUILDING1_DESTROYED.LOD
      SecondaryChance=100
      SecondaryEffect=LargeFire

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      78 downloads

         (1 review)

      0 comments

      Updated

    3. Zastava-M55 AAA

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      Zastava-M55 model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
      [TargetTypeXXX] <-------- Change to the next number at the bottom of you types list
      Name=GK-Zastava-M55
      FullName=GK-Zastava-M55
      TargetType=AAA
      ;TargetType=MISC
      UseGroundObject=TRUE
      GroundObjectType=GK-Zastava-M55
      ActiveYear=1960
      TargetValue=25
      RepairRate=3.22
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DestroyedEffect=SmallRocketGroundExplosion
      DestroyedModel=Truck_DESTROYED.LOD
      SecondaryEffect=VehicleFireEffect
      SecondaryChance=100

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.1.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Coupi for making all the data files and testing the model.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Video by Coupi
       

      206 downloads

         (1 review)

      0 comments

      Updated

    4. Jet pilot

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      New Pilot model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      This is for Strike Fighters 2 Series ONLY.
      Installation:
      Copy the files to Objects\pilot folder
      Add these lines to the _DATA.INI file to any jet you would like to add the new pilot to.
      [Pilot]
      PilotModelName=GK-Pilot     <----
      PilotHeadNodeName=GK-Head    <----
      if you have a two-seater add the Copilot as well.
      [CoPilot]
      PilotModelName=GK-Pilot1    <----
      PilotHeadNodeName=GK-Head    <----

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Fuse
      FaceGen
      If you need any assistance please contact me at 
      gkabs@gkabs.net

      353 downloads

         (2 reviews)

      13 comments

      Updated

    5. UAZ-469

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      UAZ-469 model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
      [TargetTypeXXX] <-------- Change to the next number at the bottom of you types list

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat big thank you for making all 4 textures for the model and the Driver/Gunner.
      Coupi for his outstanding work with the data file without him this is nothing big thank you, my friend.
      Google for some photos and information.
      Driver and gunner are free low poly from the net without skin.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      videos by Coupi
       

      121 downloads

         (0 reviews)

      1 comment

      Updated

    6. Oshkosh M978-Fuel Truck and M977-Truck

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M978 HEMIT and M977 HEMIT models
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
      [TargetTypeXXX] <-------- Change to the next number at the bottom of your types list
      Name=GK_M977_HEMTT
      FullName=GK_M977_HEMTT
      ModelName=GK_M977_HEMTT.LOD
      TargetType=MISC
      ActiveYear=0
      TargetValue=50
      UseGroundObject=TRUE
      GroundObjectType=GK_M977_HEMTT
      DamagePoint=140.0
      ArmorValue=24516080.0
      ArmorType=2
      RepairRate=0.150
      StartDetectChance=20
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      CollisionMesh=
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=BUILDING1_DESTROYED.LOD
      SecondaryChance=100
      SecondaryEffect=LargeFire
      [TargetTypeXXX] <-------- Change to the next number at the bottom of you types list
      Name=GK_M978_HEMTT
      FullName=GK_M978_HEMTT
      ModelName=GK_M978_HEMTT.LOD
      TargetType=MISC
      ActiveYear=0
      TargetValue=50
      UseGroundObject=TRUE
      GroundObjectType=GK_M978_HEMTT
      DamagePoint=140.0
      ArmorValue=24516080.0
      ArmorType=2
      RepairRate=0.150
      StartDetectChance=20
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      CollisionMesh=
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=BUILDING1_DESTROYED.LOD
      SecondaryChance=100
      SecondaryEffect=LargeFire

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      turbosquid for using their model photos for references and for some texture.
      https://www.turbosquid.com/Search/3D-Models/m978
      Some textures have been used from other games that were in the google search.
      Google for some photos and information.
      gerwin for some of his data file
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      120 downloads

         (2 reviews)

      2 comments

      Updated

    7. M163-PIVADS

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M163-PIVADS model with 10 textures.
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      add this to your soundlist under the Flight folder if you don't have it listed there.
      SoundFileXXX=Vulcan.wav
      Note Change the XXX with the last number in your soundlist 
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to  compufat for making three textures for the model (CamoChile, TanChile, and TanArmy)
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      157 downloads

         (1 review)

      2 comments

      Updated

    8. PBR-MK-II riverboat

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      PBR-MK-II riverboat model.
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to swambast for adding more detail to the model and enhancing the texture with great details.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      192 downloads

         (2 reviews)

      2 comments

      Updated

    9. Command and Communications Boat

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      COM-Boat model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      add this to your soundlist under the Flight folder is you don't have it listed there.
      SoundFileXXX=PatrolBoatSlow
      SoundFileXXX=PatrolBoatSlow
      SoundFile003=AAA
      SoundFile009=Cannon

      [PatrolBoatSlow]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=3
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [PatrolBoatSlow]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=3
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [AAA]
      Priority=NORMAL
      Looped=FALSE
      NumBuffers=2
      3DSound=TRUE
      DopplerEffect=TRUE
      MaxDist=1200.000000
      MinDist=100.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [Cannon]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=100.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      Note Change the XXX with the last number in your soundlist 
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to guuruu and KJakker for helping me with all my questions regarding the data file 
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      124 downloads

         (0 reviews)

      0 comments

      Updated

    10. Patrol Craft Fast ak Swift Boats

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      Patrol Craft Fast (Swift boat) model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      add this to your soundlist under the Flight folder is you don't have it listed there.
      SoundFileXXX=PatrolBoatSlow
      SoundFileXXX=PatrolBoatSlow
      SoundFileXXX=50CAL_M2
      [PatrolBoatSlow]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=3
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [PatrolBoatSlow]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=3
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [50CAL_M2]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=100.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      Note Change the XXX with the last number in your soundlist 
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to guuruu and KJakker for helping me with all my questions regarding the data file 
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      150 downloads

         (1 review)

      1 comment

      Updated

    11. Asian Junk-Furled -Sail

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      GK-Junk-Furled -Sail model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to guuruu and KJakker for helping me with all my questions regarding the data file 
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      98 downloads

         (1 review)

      1 comment

      Updated

    12. Asian Junk boat

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      Junk Boat model with two textures for the sail
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      add this to your soundlist under the Flight folder if you don't have it listed there.
      [SoundList]
      SoundFileXXX=ShipMovement
      [ShipMovement]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=3
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      Note Change the XXX with the last number in your soundlist 
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      108 downloads

         (2 reviews)

      0 comments

      Updated

    13. DaNang Round-basket

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      DaNang Round-basket model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to guuruu and KJakker for helping me with all my questions regarding the data file 
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      94 downloads

         (2 reviews)

      0 comments

      Updated

    14. Ha-Long longboat

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      Ha-Long longboat model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to guuruu and KJakker for helping me with all my questions regarding the data file 
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
       

      113 downloads

         (2 reviews)

      0 comments

      Updated

    15. Asian Harbor

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      Asian Harbor model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      To add to your terrain of choice simply add the following entry into your terrain_TYPES.INI
      [TargetTypexxx]  <------- make sure to add your sequence number
      Name=Harbor
      FullName=Asian Harbor
      ModelName=GK-Harbor.lod
      TargetType=MISC
      ActiveYear=0
      TargetValue=20
      UseGroundObject=FALSE
      DamagePoint=10.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=0.150
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=15000.0
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=barrack2_destroyed.LOD
      SecondaryChance=25
      SecondaryEffect=SmallExplosionEffect
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to guuruu and KJakker for helping me with all my questions regarding the data file 
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      85 downloads

         (0 reviews)

      0 comments

      Updated

    16. DaNang longboat

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      DaNang longboat model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      also, add the sound file name to the soundlist.INI under the flight folder 
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to guuruu and KJakker for helping me with all my questions regarding the data file 
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      114 downloads

         (2 reviews)

      3 comments

      Updated

    17. M106A3 mortar carrier

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M106A3-MC model with 14 textures
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=50cal
      SoundFileXXX=Mortar
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [50cal]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [Mortar]
      Priority=NORMAL
      Looped=FALSE
      NumBuffers=2
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1500.000000
      MinDist=400.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to guuruu for fixing my mortar dataINI and adding these explosion effects and everyone who replied to my question and offered to help
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      103 downloads

         (2 reviews)

      0 comments

      Updated

    18. M106A3-NC (No Crew)

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M106A3-NC (No Crew) model with 14 textures
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=50cal
      SoundFileXXX=Mortar
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [50cal]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [Mortar]
      Priority=NORMAL
      Looped=FALSE
      NumBuffers=2
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1500.000000
      MinDist=400.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Big thanks to guuruu for fixing my mortar dataINI and adding these explosion effects and everyone who replied to my question and offered to help
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      66 downloads

         (0 reviews)

      1 comment

      Updated

    19. M113 APC

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M113APC model with 15 textures
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=50cal
      SoundFileXXX=Mortar
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [50cal]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [Mortar]
      Priority=NORMAL
      Looped=FALSE
      NumBuffers=2
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1500.000000
      MinDist=400.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      90 downloads

         (0 reviews)

      1 comment

      Updated

    20. M113 APC (No crew)

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M113APC-NC (No crew) model with 15 textures
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=50cal
      SoundFileXXX=Mortar
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [50cal]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [Mortar]
      Priority=NORMAL
      Looped=FALSE
      NumBuffers=2
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1500.000000
      MinDist=400.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      65 downloads

         (0 reviews)

      1 comment

      Updated

    21. Pantsir S1 missile system (SA-22 Greyhound)

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      SA-22 Greyhound / Pantsir-S1  model and 4 textures.
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Michael Weinert for the model and the textures.
      guuruu for fixing my data files and testing the model and making the missile hit the target as it should.
      compufat for the missile /model textures
      Me for compiling the textures and the data files.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      PS. I forgot to upload these two photos for the winter texture.


      279 downloads

         (3 reviews)

      0 comments

      Updated

    22. M113 ACAV 80's

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M113 ACAV 80's model with 19 textures
      two armed ambulances (i know it is not realistic but it is there)
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=50cal
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [50cal]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      97 downloads

         (2 reviews)

      0 comments

      Updated

    23. M113 ACAV 60's and 70's

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M113 ACAV  60' and 70's model with 15 textures
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=50cal
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [50cal]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      135 downloads

         (1 review)

      0 comments

      Updated

    24. M113 ACAV 90's and 2000

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M113 ACAV 90's model with 18 textures
      M113 ACAV 2000 model with 18 textures
      the only changes are the crow helmet shape and uniform color
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=50cal
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [50cal]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      151 downloads

         (0 reviews)

      0 comments

      Updated

    25. M113 UN and Ambulance

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M113 one UN and two ambulances
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please add to Soundlist under Flight directory and change the XXX with the correct number
      [SoundList]
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for making most of the texture for the model Thanks a lot for your help as always
      Thanks to however made the sounds and Effects as I don't know their names.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      65 downloads

         (0 reviews)

      1 comment

      Updated



×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..

  I accept