Jump to content

Strike Fighters 2 Series by Thirdwire


Sub Category  

All SF2 Series Simulation Modifications and Add-Ons

SUBCATEGORIES

    1. Mirage F-1CZ

      By ludo.m54

      Mirage F-1CZ
      This mod is dedicated to BPAO, nothing would have been possible without him.
      South Africa began looking for a replacement for the Mirage III in 1971 and purchased a licence to manufacture the Mirage F1 and its engine, the intention being to produce up to 100 Mirage F1s. This license was however cancelled because of the 1977 arms embargo. The SAAF then bought 16 Mirage F1CZs and 32 Mirage F1AZs which were quickly delivered by Dassault before the embargo was implemented, with deliveries starting in 1975. Both the F1CZ and F1AZ variants of the SAAF saw action during operations in the Border War.
      Covered unit :
      N°3 Squadron
      A big thank to all on Combatace and C6 forums that helped us solving issues we encountered.
      Any omission in credits is totally unwanted, if I forgot somebody, let me know, I will correct this.
      This addon is and will in all cases remain freeware.
      Released under CombatAce Fair-Use terms.
      Enjoy
      The Mirage F-1 Team.

      921 downloads

         (14 reviews)

      9 comments

      Updated

    2. What if north Vietnam had the M-84 MBT

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      What if north Vietnam had the M-84 MBT
      All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please change the XXX with the correct number from your //Soundlist:
      [SoundList]
      SoundFileXXX=PKT762
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      SoundFileXXX=grenade
      [PKT762]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [grenade]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Nightshade/PR for searching information for the tank blueprint.
      AleksejFonGrozni as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
      https://sketchfab.com/3d-models/m-84-main-battle-tank-a6839bb9b0d7403aa80951c31d76fe18
      3Dimitrije as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
      https://sketchfab.com/3d-models/1984-uro-akovic-m-84-141ef5a5934742329b7d618c2e004f92
      compufat for making textures for North Vietnam had the M-84
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      1.1.0 Update
      Added the Koaxial PKT MG.
      fixed the texture and corrected some.
      Thanks to strahi and his update of the user list and more information about the tank.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      52 downloads

         (0 reviews)

      1 comment

      Submitted

    3. MiG-29A Series 9-12_Myanmar

      By compufat

      thanks to bazillius for his excellent work on the model and Combatace team

      120 downloads

         (0 reviews)

      3 comments

      Submitted

    4. A4D-2 (TW A-4B & Nyghtfall's A-4E pit) 'Rework'

      By NIELS

      "My rendition of the A4D-2 (Before 1962 change to A-4B & C)"
      INSTALL – unpack/unzip file contents and drag/copy to main YAP Revamp Works (Whatever you have named it) folder.
      THANKS TO:
      * Nyghtfall and Wrench for their help in working/moving cockpit items techniques.
      *Repaint of Nyghtfall's outstanding A-4E pit.
      *TW A-4B stock jet - required for AR probe.
      *Repaint/numbering of A-4A fuselage, Nose, tail numbers from ChampionsVA56 suhsjake.
      *J65-W-5.wav engine sound from ChampionsVA56.
      ** Included is a A-4A_DATA – SAM_Lgt_Active.ini file which activates SAM threat warning equipment if desired. Don't think this mod was worked in until later A-4 models.
      *** Had problems getting the program to load different BuNo, TN, Modex, etc. Sometimes none at all?
      Had to select in the loading phase of a mission each acft individually – then they would show?
      If anyone can help regarding this tail no issue please help.
      Enjoy, NIELS

      142 downloads

         (0 reviews)

      1 comment

      Submitted

    5. C-141A Starlifter (by Coyote Aerospace)

      By daddyairplanes

      Lockheed C-141A Starlifter  by Coyote Aerospace
      This mod is a new version of the C-141A Starlifter by Veltro2K, with skins by daddyairplanes
      It features several historical skins covering several important periods in the Starlifters A model career
          Installation
      unzip, open the 141A(v2k) folder, drop contents into desired mod folder
      allow overwrites if needed, weapons may be the only thing needed
          Included
      C-141A Starlifter model
      MATS skin, MAC skins for 1966, 1967, 1970, and 1973 as well as a special Operation Homecoming skin
      Cargo, Jeep, and Paratrooper weapons for the bay
          Known Issues
      - the main cargo doors and paratrooper doors open at the same time. an expert was consulted, and it is not reasonably feasable to seperate the actions.
      - cockpit is an older one, this aircraft is intended more for eyecandy as there are no real transport missions in SF2. anyone who can donate a more modern pit would be greatly appreciated
          Credits
      Veltro2K:    main model, intial idea to revamp this plane
      daddyairplanes:    skin and decal work, ini edits
      Coupi:        QA checks (again thanks for the big catch!)
      dels:        technical consults on whats possible, (or more accurately whats not)
      Killerbee331:     paratrooper, M38 Jeep from weapons pack
      - cargo and pallet are also included although i cannot recall who created those. if it was you or you remember who did it, please let us know so we can fix the credits

      on behalf of the Coyote Aerospace team, thank you for downloading this mod. We hope you enjoy it
      Kevin Unruh aka
      daddyairplanes
      (stickerus prolificus)
      17 October 2021

      161 downloads

         (0 reviews)

      1 comment

      Updated

    6. Mirage F1AD

      By ludo.m54

      Mirage F1AD
       
      This mod is dedicated to BPAO, nothing would have been possible without him.
       
      Libyan Air Force received 16 F1AD, 6 F1BD & 16 F1ED aircraft. All were grounded but twelve were contracted for refurbishment, of which only four were returned to service.Of these twelve, two were taken to Malta when their pilots defected. France will renovate Libya's small fleet of Mirage F1s and train its personnel as part of a defence co-operation agreement signed in 2012. Three Mirage F1 were reported lost during the western 2019 offensive.
       
      Covered unit :
      1011th "Ground Attack" Squadron.
      GAN post 2012 aircrafts.
       
      A big thank to all on Combatace and C6 forums that helped us solving issues we encountered.
      Any omission in credits is totally unwanted, if I forgot somebody, let me know, I will correct this.
       
      This addon is and will in all cases remain freeware.
       
      Released under CombatAce Fair-Use terms.
       
      Enjoy
       
      The Mirage F.1 Team !

      200 downloads

         (3 reviews)

      2 comments

      Updated

    7. Saab J25/J25R Svärd (Sword)

      By ValAstur

      Saab J25/J25R Svärd (Sword) for STRIKE FIGHTERS 2 (Israel or Quad-Merged)
      Mod of the stock MiG-17F and PF from SFP:I to make them look like  fictional fighter planes for the swedish air force.

      INSTRUCTIONS
      1. Drop the folders into your Objects folder. If asked to overwrite, click yes.

      CREDITS
      Big Thanks to Thirdwire for the games and the superb models they have.

      Kindest regards
      ValAstur

      42 downloads

         (0 reviews)

      1 comment

      Submitted

    8. 101sq IAF for Dels' F-23A Black Widow II

      By ValAstur

      101sq IAF for Dels' F-23A Black Widow II
      Skin for Dels beautiful F-23A depicting a possible camoflage for the israeli air force in case the aircraft would have gone into serial production and being purchased by Israel.

      INSTRUCTIONS
      1. Drop the folders into your Objects folder. If asked to overwrite, click yes.

      CREDITS
      Big Thanks to Dels for the F-23A.

      Kindest regards
      ValAstur

      47 downloads

         (0 reviews)

      0 comments

      Submitted

    9. FW-190A8R2

      By torno

      FW 190A8R2, (similar to the FW190A8 but with more armor), this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cockpit with 1 historical skin, the new pilot Luftwaffe (there are 2 lods, one with glasses and one not, the pilot with glasses is worn by default). It includes all the decals of the previous fw190 created by me.
      Hope you enjoy it, more info in the readme file.
      Sorry my English is bad

      210 downloads

         (1 review)

      1 comment

      Submitted

    10. Repainted WW2 Pilot for P-51D

      By Coupi

      A fast attempt in order to have a 'new' high altitude pilot for the P-51D Mustang 
      from the ooold WW2 pilot created in 2004.
      I don't know who has created the original WW2 Pilot mod ! Thanks to him.
      Note : in my opinion we need a cute new WW2 USAAF (high altitude/G force suite, mask, visor, etc...) pilot 
      for our beautiful P-51D mustangs (TW and  FastCargo ones).
      Lod file included
      Position for the TW P-51D : 0.000,-0.835,0.700
      Position for the FastCargo Mustang : 0.000,-0.875,0.665
      Many many thanks to modders and skinners for their beautiful works !!!
      Best regards
      Coupi.

      41 downloads

         (0 reviews)

      0 comments

      Submitted

    11. FW-190A8

      By torno

      FW 190A8, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cockpit with 3 historical skin and 2 clean so you can fly with the nation you like, the new luftwaffe pilot (there are 2 lods, one with glasses and one not, the pilot with glasses is worn by default).
      Hope you enjoy it, more information in the readme file.
      Sorry my English is bad
      Torno
       




      165 downloads

         (1 review)

      0 comments

      Submitted

    12. TW A-4A Cockpit repaint and ini tweaks

      By NIELS

      Repaint of the Third Wire A-4A Cockpit and cockpit.ini tweaks. (TW DLC009 A-4A reuired for 'A' model pit components) Go to your A-4A and drop in – allow files to overwrite. Thanks to Nyghtfall and Wrench for their help in working the cockpit techniques/tweaks. Thanks to Third Wire and TK for the DLC009 A-4A. Thanks to all the Modders and Staff here at Combat Ace. A little tiny piece of pay back for all the outstanding work offered here at this great site! Enjoy, NIELS

      96 downloads

         (0 reviews)

      0 comments

      Updated

    13. F-15A Aeronautica Militare

      By ValAstur

      Fictional mod of the stock F-15A Baz to make it look like a fighter plane for the italian air force.
      YOU WILL NEED AT LEAST SF2:I TO GET THIS PLANE RUNNING!

      INSTRUCTIONS
      1. Drop the folders into your Objects folder. If asked to overwrite, click yes.

      CREDITS
      Big Thanks to Thirdwire for the games and the superb models they have.
      And also to Geary for the template to the F-15A.

      Happy flying
      ValAstur

      56 downloads

         (0 reviews)

      0 comments

      Submitted

    14. M-84AS / M-84AB1 Yugoslav MBT

      By GKABS

      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M-84AS / M-84AB1 Yugoslav MBT model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please change the XXX with the correct number from your //Soundlist:
      [SoundList]
      SoundFileXXX=PKT762
      SoundFileXXX=TankEngine
      SoundFileXXX=TankTrack
      SoundFileXXX=grenade
      [PKT762]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [TankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [grenade]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      Nightshade/PR for searching information for the tank blueprint.
      AleksejFonGrozni as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
      https://sketchfab.com/3d-models/m-84-main-battle-tank-a6839bb9b0d7403aa80951c31d76fe18
      3Dimitrije as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
      https://sketchfab.com/3d-models/1984-uro-akovic-m-84-141ef5a5934742329b7d618c2e004f92
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net

      110 downloads

         (0 reviews)

      1 comment

      Submitted

    15. Modern Diesel-Electric Train

      By strahi

      Finally we now have a modern train model. Thanks to my friends Angela and Gkabs, for the help. I hope you'll like it. If anyone wants to make a better skin, I thank you in advance.
       

      117 downloads

         (0 reviews)

      3 comments

      Submitted

    16. [Fictional] Supermarine Spitfire IXc 'Iran'

      By Spinners

      Supermarine Spitfire IXc 'Iran' for STRIKE FIGHTERS 2 
      This is a simple mod of the stock Third Wire Spitfire IXc to create a fictional Spitfire IXc in service with the Imperial Iranian Air Force in the 1946-1951 timeline.

      BACKSTORY
      When Iran ordered Hawker Hurricanes from the UK in 1940 there was never any real hope of the order being immediately fulfilled due to the urgent wartime demands of the Royal Air Force although 10 war weary Hurricanes were transferred from RAF Middle East Command stocks during 1943. When hostilities ceased the Iranian government asked the UK government for more advanced fighters and this was agreed leading to the transfer of 26 Supermarine Spitfire IXC's from RAF Mediterranean and Middle East Command. All 26 Spitfires were delivered to the Advanced Fighter Training Group of the Flying Training School at Doshan Teppeh during 1946.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the Spitfire9cIIAF folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the Spitfire9cIIAF folder into your Decals folder.
      That's it!

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Extra special thanks to Starfighter2 for the Spitfire cockpit.
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 1 - 10/04/2021

      62 downloads

         (0 reviews)

      0 comments

      Updated

    17. [Fictional] Supermarine Spitfire IXc 'Dhimar'

      By Spinners

      Supermarine Spitfire IXc 'Dhimar' for STRIKE FIGHTERS 2 
      This is a simple mod of the stock Third Wire Spitfire IXc to create a fictional Spitfire IXc in service with the Royal Dhimari Air Force in the 1943-1947 timeline.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the Spitfire9c_Dh folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the Spitfire9c_Dh folder into your Decals folder.
      That's it! Although you will need a suitable 'prop' pilot (not supplied here).

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Extra special thanks to Starfighter2 for the Spitfire cockpit.
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 1 - Sept 24th, 2021

      60 downloads

         (0 reviews)

      0 comments

      Updated

    18. [Fictional] Avia S-199P for Strike Fighters 2

      By Spinners

      Avia S-199P for STRIKE FIGHTERS 2 
      This is a simple mod of the stock Avia S-199 to create a fictional S-199P in service with the Parani Air Force in the 1946-1952 timeline.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the S-199P folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the S-199P folder into your Decals folder.
      That's it!
      (But you will need a suitable 'prop' pilot).

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Special thanks to Starfighter2 for bringing us the superb Me-109 cockpit used here.
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 1 - Sept 21st 2021
       

      73 downloads

         (0 reviews)

      0 comments

      Submitted

    19. Blast Shield

      By GKABS

      Hello and thank you for downloading my work.

      What's included:
      all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      Installation:
      Copy all the files to Terrains folder and add the following lines to _TYPES.ini file
      [TargetTypeXXX]
      Name=Blast Shield-4NL
      FullName=Blast Shield-4NL
      ModelName=GK-Blast-Shield-4NL.lod
      TargetType=MISC
      ActiveYear=0
      TargetValue=0
      UseGroundObject=FALSE
      DamagePoint=0.001
      ArmorValue=0.0
      ArmorType=0
      RepairRate=10.0
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=
      DestroyedModel=
      SecondaryChance=0
      [TargetTypeXXX]
      Name=Blast Shield-4WL
      FullName=Blast Shield-4WL
      ModelName=GK-Blast-Shield-4WL.lod
      TargetType=MISC
      ActiveYear=0
      TargetValue=0
      UseGroundObject=FALSE
      DamagePoint=0.001
      ArmorValue=0.0
      ArmorType=0
      RepairRate=10.0
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=
      DestroyedModel=
      SecondaryChance=0
      [TargetTypeXXX]
      Name=Blast Shield-NL
      FullName=Blast Shield-NL
      ModelName=GK-Blast-Shield-NL.lod
      TargetType=MISC
      ActiveYear=0
      TargetValue=0
      UseGroundObject=FALSE
      DamagePoint=0.001
      ArmorValue=0.0
      ArmorType=0
      RepairRate=10.0
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=
      DestroyedModel=
      SecondaryChance=0
      [TargetTypeXXX]
      Name=Blast Shield-WL
      FullName=Blast Shield-WL
      ModelName=GK-Blast-Shield-WL.lod
      TargetType=MISC
      ActiveYear=0
      TargetValue=0
      UseGroundObject=FALSE
      DamagePoint=0.001
      ArmorValue=0.0
      ArmorType=0
      RepairRate=10.0
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=
      DestroyedModel=
      SecondaryChance=0
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      GKABS for creating the model and the skins
      Credit goes to: https://www.textures.com as a use a lot of their photos to create the skins.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      If you need any assistance please contact me at 
      gkabs@gkabs.net
       

      99 downloads

         (0 reviews)

      0 comments

      Updated

    20. Concrete Blocks

      By GKABS

      Hello and thank you for downloading my work.
      What's included:
      all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      Installation:
      Copy all the files to Terrains folder and the falowing to _TYPES.ini file
      [TargetTypeXXX]
      Name=Concrete Blocks
      FullName=4 Concrete Blocks
      ModelName=GK-Concrete-4Blocks.lod
      TargetType=MISC
      ActiveYear=0
      TargetValue=0
      UseGroundObject=FALSE
      DamagePoint=0.001
      ArmorValue=0.0
      ArmorType=0
      RepairRate=10.0
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=
      DestroyedModel=
      SecondaryChance=0
      [TargetTypeXXX]
      Name=Concrete Block
      FullName=Concrete Block
      ModelName=GK-Concrete-Block.lod
      TargetType=MISC
      ActiveYear=0
      TargetValue=0
      UseGroundObject=FALSE
      DamagePoint=0.001
      ArmorValue=0.0
      ArmorType=0
      RepairRate=10.0
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=
      DestroyedModel=
      SecondaryChance=0
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      GKABS for creating the model and the skins
      Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      If you need any assistance please contact me at 
      gkabs@gkabs.net
       

      78 downloads

         (0 reviews)

      0 comments

      Updated

    21. Windsock

      By GKABS

      Hello and thank you for downloading my work.

      What's included:
      all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      Installation:
      Copy all the files to Terrains folder and the falowing to _TYPES.ini file
      [TargetTypeXXX]
      Name=Windsock-New
      FullName=Windsock-New
      ModelName=GK-Windsock.lod
      TargetType=MISC
      ActiveYear=0
      TargetValue=0
      UseGroundObject=FALSE
      DamagePoint=0.001
      ArmorValue=0.0
      ArmorType=0
      RepairRate=10.0
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=
      DestroyedModel=
      SecondaryChance=0
      AnimationID=1
      AnimationTime=1.0
      Effect=RedlightEffect
      EffectOffset=0.0,0.0,36.0
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      GKABS for creating the model and the skins
      Credit goes to: https://www.textures.com as a use a lot of their photos to create the skins.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      If you need any assistance please contact me at 
      gkabs@gkabs.net
       

      82 downloads

         (0 reviews)

      0 comments

      Updated

    22. Airbase radar

      By GKABS

      Hello and thank you for downloading my work.
      What's included:
      all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      Installation:
      Copy all the files to Terrains folder and the falowing to _TYPES.ini file
      [TargetTypeXXX]
      Name=AB_Radar
      FullName=AB_Radar
      ModelName=GK_AB_Radar.LOD
      TargetType=RADAR
      ActiveYear=1960
      TargetValue=200
      UseGroundObject=FALSE
      DamagePoint=1.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=0.555
      StartDetectChance=80
      StartIdentifiedChance=20
      IncreaseDetectChanceKey=10
      MaxVisibleDist=6000.0
      DamagedModel=
      DestroyedEffect=SmallFire
      DestroyedModel=GK_Radar-Destroyed.LOD
      SecondaryEffect=SmallExplosionEffect
      SecondaryChance=50
      AnimationID=1
      AnimationTime=2.0

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      GKABS for creating the model and the skins
      Credit goes to: https://www.textures.com as a use a lot of their photos to create the skins.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      If you need any assistance please contact me at 
      gkabs@gkabs.net
       

      157 downloads

         (1 review)

      0 comments

      Updated

    23. Control Tower

      By GKABS

      Hello and thank you for downloading my work.

      What's included:
      All my Zip file should include the Strike Fighters 2 Series game files (.LOD) and the texture required.
      Installation:
      Copy all the files to Terrains folder and the falowing to _TYPES.ini file
      [TargetTypeXXX]
      Name=AB-Tower
      FullName=AB-Control Tower
      ModelName=GK-Control-Tower-Yellow-B.lod
      TargetType=TOWER
      ActiveYear=0
      TargetValue=20
      UseGroundObject=FALSE
      DamagePoint=10.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=20.00
      StartDetectChance=100
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=GK-Control-Tower-Destroyed.LOD
      DestroyedEffect=SmallTallStructureCollapse
      DestroyedModel=tower1_destroyed.LOD
      SecondaryEffect=SmallExplosionEffect
      SecondaryChance=100
      Or
      [TargetTypeXXX]
      Name=AB-Tower
      FullName=AB-Control Tower
      ModelName=GK-Control-Tower-Brown-B.lod
      TargetType=TOWER
      ActiveYear=0
      TargetValue=20
      UseGroundObject=FALSE
      DamagePoint=10.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=20.00
      StartDetectChance=100
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=GK-Control-Tower-Destroyed.LOD
      DestroyedEffect=SmallTallStructureCollapse
      DestroyedModel=tower1_destroyed.LOD
      SecondaryEffect=SmallExplosionEffect
      SecondaryChance=100
      This model comes with 2 skins.
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      GKABS for creating the model and the skins
      Credit for photos to create the skins goes to: 
      - https://www.textures.com
      - http://www.evidence.org.kw/index.php
      - https://picryl.com/search?created_date_from=1990&created_date_to=1995&q=kuwait hangar&page=3

      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      If you need any assistance please contact me at 
      gkabs@gkabs.net
       

      104 downloads

         (0 reviews)

      0 comments

      Updated

    24. Chu containers & HESCO WALL

      By GKABS

      Hello and thank you for downloading my work.

      What's included:
      all my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      Installation:
      Copy all the files to the Terrains folder and the following to _TYPES.ini file

      [TargetTypeXXX]
      Name=Container 4RWW
      FullName=Container-4Rooms-WW
      ModelName=GK-Container-4Room-WW.LOD
      TargetType=MISC
      ActiveYear=0
      TargetValue=20
      UseGroundObject=FALSE
      DamagePoint=10.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=0.150
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=building1_destroyed.LOD
      SecondaryChance=50
      SecondaryEffect=SmallExplosionEffect
      [TargetTypeXXX]
      Name=Container 7Room
      FullName=Container-7Room
      ModelName=GK-Container-7Room.LOD
      TargetType=MISC
      ActiveYear=0
      TargetValue=20
      UseGroundObject=FALSE
      DamagePoint=10.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=0.150
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=building1_destroyed.LOD
      SecondaryChance=50
      SecondaryEffect=SmallExplosionEffect
      [TargetTypeXXX]
      Name=Container-LRoom
      FullName=Container-L-Room
      ModelName=GK-Container-L-Room-1.LOD
      TargetType=MISC
      ActiveYear=0
      TargetValue=20
      UseGroundObject=FALSE
      DamagePoint=10.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=0.150
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=building1_destroyed.LOD
      SecondaryChance=50
      SecondaryEffect=SmallExplosionEffect
      [TargetTypeXXX]
      Name=Container Room
      FullName=Container-Room
      ModelName=GK-Container-Room-1.LOD
      TargetType=MISC
      ActiveYear=0
      TargetValue=20
      UseGroundObject=FALSE
      DamagePoint=10.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=0.150
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=building1_destroyed.LOD
      SecondaryChance=50
      SecondaryEffect=SmallExplosionEffect
      [TargetTypeXXX]
      Name=Jersey-Barriers
      FullName=Jersey-Barriers
      ModelName=GK-Jersey-Barriers.LOD
      TargetType=MISC
      ActiveYear=0
      TargetValue=20
      UseGroundObject=FALSE
      DamagePoint=10.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=0.150
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=building1_destroyed.LOD
      SecondaryChance=50
      SecondaryEffect=SmallExplosionEffect
      [TargetTypeXXX]
      Name=Container-7RWW
      FullName=Container-7Room-WW
      ModelName=GK-Container-7Room-WW.LOD
      TargetType=MISC
      ActiveYear=0
      TargetValue=20
      UseGroundObject=FALSE
      DamagePoint=10.0
      ArmorValue=0.0
      ArmorType=0
      RepairRate=0.150
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DamagedModel=
      DestroyedEffect=MediumShortStructureCollapse
      DestroyedModel=building1_destroyed.LOD
      SecondaryChance=50
      SecondaryEffect=SmallExplosionEffect

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      GKABS for creating the model and the skins
      Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
      and daddyairplanes for sharing his photo, many thank to him.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      If you need any assistance please contact me at 
      gkabs@gkabs.net
       

      94 downloads

         (0 reviews)

      0 comments

      Updated

    25. BTR-50

      By GKABS

      Hello and thank you for downloading my work.

      What's included:
      all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      there are 2 skins for the model and I have made a bump file.
      Installation:
      Copy folder to Objects/GroundObject and the following to _TYPES.ini file

      [TargetTypeXXX]
      Name=BTR-50
      FullName=BTR-50 APC
      TargetType=MISC
      ActiveYear=0
      TargetValue=50
      UseGroundObject=TRUE
      GroundObjectType=GK-BTR-50
      RepairRate=0.555
      StartDetectChance=0
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DestroyedEffect=SmallRocketGroundExplosion
      DestroyedModel=GK-BTR-50-Destroued
      SecondaryEffect=VehicleFireEffect
      SecondaryChance=100

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      GKABS for creating the model and the skins
      Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
      The gunner - skin form SP1
      And finally not to forget the wonderful site of https://combatace.com and all the nice member's and their dedicated support for this game.
      If you need any assistance please contact me at 
      gkabs@gkabs.net
       

      150 downloads

         (0 reviews)

      0 comments

      Updated



×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..

  I accept