Leaderboard

single-seat fighter for the RAF. Two prototypes converted from F.1s; 224 were built, 20 were exported to Norway, and 150 to Canada for the Royal Canadian Air Force. Mexico had 55 ex RAF nicknamed Aguacate ("avocado") due to colour and shape. WHAT'S IN: - 16 new skins - historical decals/serial numbers - some ini/tga tweaking CREDITS: - plane model A-TEAM - skin & decal works paulopanz TO INSTALL: - grab (*) proper lod file from A-TEAM site and put inside aircraft/vampire1 folder - all in your main mod folder and overwrite

single-seat fighter version for the RAF; Three prototypes (named Spider Crab) built for specification E.6/41. 228 production aircraft built, including 70 for Sweden as the J 28A. 30 ex-RAF F.1s were transferred to the Armee de l'Air in 1948 for familiarization. In 1946, the Swiss Air Force purchased an initial four Vampire F.1. TG431 was supplied to Royal Australian Air Force (RAAF) as A78-1 in May 1947 for familiarization. TG372 to Royal Canadian Air Force (RCAF) on an evaluation basis. The Dominican Air Force purchased 25 of Sweden's Vampires in 1952. WHAT'S IN: - 20 new skins - historical decals/serial numbers - some ini/tga tweaking CREDITS: - plane model A-TEAM - skin & decal works paulopanz TO INSTALL: - grab (*) proper lod file from A-TEAM site and put inside aircraft/vampire1 folder - all in your main mod folder and overwrite NOTE: This plane hasn't fuel tanks but a sub version with fuel tanks should be very wellcome as there are some evidence about their use mostly from Sweden and Swiss AF. The tanks textures are already included.

Nene-powered single-seat fighter-bomber for the Royal Australian Air Force; 57 built in Australia by the De Havilland Australia (DHA) WHAT'S IN: - 2 new skins - historical decals/serial numbers - some ini/tga tweaking CREDITS: - plane model A-TEAM - skin & decal works paulopanz TO INSTALL: - grab (*) proper lod file from A-TEAM site and put inside aircraft/vampire1 folder - all in your main mod folder and overwrite

Nene-powered upgraded F.30, 28 F.30s converted and 23 built new by De Havilland Australia. WHAT'S IN: - 4 new skins - historical decals/serial numbers - some ini/tga tweaking CREDITS: - plane model A-TEAM - skin & decal works paulopanz TO INSTALL: - grab (*) proper lod file from A-TEAM site and put inside aircraft/vampire1 folder - all in your main mod folder and overwrite

Stephen1918 Fokker E cockpits for First Eagles 1 Fokkers EI, EIa, EII, EIIa, EIII, EIIIa, EIV & EIVa cockpit pack for First Eagles 1. I did new textures and new painting approach for Stephen1918's Fokker E cockpits. You will find, a new Spandau machine gun, a new Parabellum machine gun, Vrt, compass.bmp figures & a new Glass.tga and a complet new set of textures for Stephen1918' cockpits. The Spandau, Parabellum machine gun, Vrt, compass and all gauges, still with the same size of the original aircraft & cockpits bmp files. Inside the pack you will find folders for optional cockpit leather colors (Black & brown) for all these fokkers above. To use one of them just rename one of your choice as: - BROWN LEATHER-FokECockpit.bmp rename it as FokECockpit.bmp - BLACK LEATHER-FokECockpit.bmp rename it as FokECockpit.bmp __________________________________________________________________________________________________________ Installation instructions for First Eagles 1 users: (cockpit & aircraft BMPs & TGA files) First make a back-up or rename your original cockpit folder, the Spandau, Parabellum, Vrt, compass BMP figures and the Glass.tga figures. This is just in case you wish return with your former cockpit textures later. Then just drop or copy all the Fokker folders from mine Aircraft folder to your Aircraft folder. That's all. _________________________________________________________________________________________________________ *OPTIONAL* I slightly modded my MinPitchFront for a little wide cockpit views (see the screenshots). If you wish to use my MinPitchFront edition ini, Open your COCKPIT.ini and make these following editions: [CockpitSeat001] MinPitchFront=-80 <----------------- you must to add this valor. This is not mandatory. All cockpit files will work normally without this edition as well That's all. __________________________________________________________________________________________________________ Credits: - Julio Junqueira skin textures (BMP & TGA files) for Stephen1918' Fokker E cockpits. - Stephen1918 for the Cockpit ini files. __________________________________________________________________________________________________________ - special thanks to Stephen1918 for the excellent Fokker E cockpit models. - special thanks to CombatAce.com hosting the files. __________________________________________________________________________________________________________ These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.

Laton's Fokker Eindeckers for First Eagles 2 Andre (Laton) Simpson Fokkers EI, EIa, EII, EIIa, EIII, EIIIa, EIV & EIVa pack for First Eagles 2. This is a pack for Laton's Fokkers E, with 3D LODs setted to use jpg format. You still need all those Fokkers above installed in your FE 2 Aircraft main folder. This pack will only replace the original 3d LODs that still using BMP figures. Also, I Hexa edited the LODs files of Laton's Fokker EIIa that had wire wheels. I comverted them to wheel covers, as they were usually in combat areas. There is 4 optional (Vrt) used by Fokkers EI, EIa, EII, EIIa, EIV & EIVa at your choice. You will find them on the folder "OPTIONAL PROPELLERS" . (2 "Garuda" propellers, one "Integrale" propeller and one "Germania" propeller) To use one of them just rename it as "Vrt". I did, one new Spandau machine gun, one new Parabellum machine gun, Vrt, compass.jpg figures & a new Glass.tga textures. The Laton's Eindeckers 3d LODs are setted to use jpg files. So you will be able to use my new Spandau, Parabellum, Vrt and compass in jpg format figures together with Stephen1918's Fokkers cockpits using JPGs textures. __________________________________________________________________________________________________________ Installation instructions for First Eagles 2: ONLY FOR FE 2 USERS (Laton's Fokker E aircrafts 3d LODs using JPGs) First make a back-up or rename all your "original Laton's Fokker E 3d LODs". Make a back-up or rename all your COMPASS.BMP, SPANDAU.BMP, VRT.BMP, PARABELA.BMP, SPANDAU_BARREL.BMP and GlASS.TGA files. Then just drop or copy all the Fokker folders from mine Aircraft folder to your Aircraft folder. *ATTENTION* After this you must to convert all Fokker E "bmp" skin files that you are already have installed before to JPG format, using your favorite image editor. That's all. __________________________________________________________________________________________________________ Credits: - Julio Junqueira skin textures (JPG & TGA files) for Laton's Fokker Eindeckers. - Andre (Laton) Simpson for the Fokker Eindeckers 3D LODs. __________________________________________________________________________________________________________ - special thanks to Andre (Laton) Simpson for the excellent Eindeckers models. - special thanks to CombatAce.com hosting the files. __________________________________________________________________________________________________________ These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.

Stephen1918 Fokker Eindecker cockpits for FE 2 Fokkers EI, EIa, EII, EIIa, EIII, EIIIa, EIV & EIVa cockpit pack for First Eagles 2. I did new textures and new painting approach for Stephen1918's Fokker E cockpits The size of the instruments were slightly increased for a better view of them. The cockpit 3D LODs are setted to use jpg files. You will find, a new Spandau machine gun, a new Parabellum machine gun, Vrt, compass.jpg figures & a new Glass.tga textures. There is 4 optional (Vrt) at your choice. You will find them on the folder "OPTIONAL PROPELLERS" . (2 "Garuda" propellers, one "Integrale" propeller and one "Germania" propeller) To use one of them just rename it as "Vrt". __________________________________________________________________________________________________________ I'm including also, here at CombatAce.com in a separated download only for FE 2 users with the Andre (Laton) Simpson's Fokker E 3d LODs, setted to use jpg files. So you will be able to use my new Spandau, Parabellum, Vrt and compass in jpg format figures together with Stephen1918 cockpit using JPGs textures. __________________________________________________________________________________________________________ Inside the pack you will find 3 folders for optional cockpit leather colors (Black & brown) for all these Fokkers above. To use one of them just rename one of your choice as: - BROWN LEATHER-FokECockpit.jpg rename it as FokECockpit.jpg - BLACK LEATHER-FokECockpit.jpg rename it as FokECockpit.jpg __________________________________________________________________________________________________________ Installation instructions for First Eagles 2: ONLY FOR FE 2 USERS. (Stephen1918's cockpit 3d LODs USING JPGs) First make a back-up or rename your "original cockpit folder". This is just in case you wish return with your former cockpit Textures and 3d LODs later. Then just drop or copy all the Fokker folders from mine Aircraft folder to your Aircraft folder. That's all. _________________________________________________________________________________________________________ *OPTIONAL* I slightly modded my MinPitchFront for a little wide cockpit views (see the screenshots). If you wish to use my MinPitchFront edition ini, Open your COCKPIT.ini and make these following editions: [CockpitSeat001] MinPitchFront=-80 <----------------- you must to add this valor. This is not mandatory. All cockpit files will work normally without this edition as well That's all. __________________________________________________________________________________________________________ Credits: - Julio Junqueira skin textures (JPG & TGA files) for Stephen1918's Fokker Eindecker cockpits. - Stephen1918 for the Fokker Eindecker Cockpit 3D LODs & ini files. __________________________________________________________________________________________________________ - special thanks to Stephen1918 for the excellent Fokker E cockpit models. - special thanks to CombatAce.com hosting the files. __________________________________________________________________________________________________________ These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.