Leaderboard
Popular Content
Showing most liked content on 03/29/2021 in all areas
-
13 points
-
6 points
-
6 points
-
5 points
Version 1.5.0
150 downloads
In mid-1952, the Sabre Mk.4 went into production with the first one flown on 28 August 1952. Apart from some minor structural and systems changes, including improved air-conditioning and gun sight, the Mk 2 and the Mk 4 were identical. Of 438 Mk 4s built, approximately 70 were used temporarily by the RCAF, all surviving examples being passed to the RAF. The other Sabre 4s went directly to the RAF under a mutual aid program, equipping 11 RAF squadrons. The majority served in West Germany with NATO, with two squadrons being based in the UK as part of RAF Fighter Command. The Sabre Mk.4 served with the RAF until mid-1956 when they were replaced by Hawker Hunters. The survivors were overhauled in the UK, fitted with '6-3' wing modifications and handed to the USAF (which had funded these aircraft) which in turn passed them on to other NATO members, with the majority going to Italy and Yugoslavia. WHAT'S IN: - 2 new planes - 23 high rez skins - decals, sounds, weapons etc. CREDITS: - Zur model - Ravenclaw temps - Wrench first SF-2 edition - paulopanz skins, decals, ini edits TO INSTALL: - all in main mod folder and overwrite Enjoy! @paulopanz PS: Canadair Sabre n°2 pack, to be continued soon. -
5 points
-
4 points
-
4 pointsAn interesting What-If. Would be fun to be able to fly it in a sim. Too bad Fairchild disposed of most of Republics records as wind tunnel test would be nice to have.
-
4 points
-
4 points
-
4 points
-
3 points
-
2 pointsThe setting "Generic" means, that this plane, vehicle, ship, Flak or SAM system is available for both sides (red and blue).
-
2 points
-
2 pointsThis entire channel is a goldmine. "How to protect your computer from getting shot at by an MBT" "Chess Trap: Tennison Gambit ICBM Edition" "How to prevent Bike theft using Electronic Warfare Countermeasures" and the most famous: "How to protect your shopping trolley from Improvised explosives"
-
2 pointsHi guys Just learned of and joined this forum from over at Sim HQ! Thank you Eric for the welcome. Cheers! (Deejan at Sim HQ)....
-
2 points
-
2 points
-
2 points
-
2 points
-
1 point
Version 1.0.0
92 downloads
Lockheed F-104H Starfighter for STRIKE FIGHTERS 2 This is a simple mod of the stock Third Wire F-104G to create a fictional F-104H in service with the Fuerza Aérea Argentina in the 1968-2006 timeline and with markings for; Grupo 8 (SEA Camo) Grupo 6 (Lo-Viz Grey N.B. StartDefaultDate=1983) Grupo 4 (Green/Grey Camo) BACKSTORY During the Spring of 1965 the Fuerza Aérea Argentina formally issued an operational requirement for a supersonic fighter-bomber to supplement and eventually replace it's F-86 Sabre force and to operate alongside the Douglas Skyhawks that were just entering service. The BAC Lightning was quickly ruled out as being short on range and undeveloped in the air-to-ground role and by the end of 1965 Fuerza Aérea Argentina officials declared that the choice was between the Dassault Mirage III and the Lockheed F-104 Starfighter. Lockheed had proposed a new variant, the F-104H, a projected export version based on the F-104G but with an optical gunsight and simplified equipment. Following a visit by Lockheed representatives to the Casa Rosada in Buenos Aires in early July 1966 the newly inaugurated President Juan Carlos Onganía announced that 36 F-104H's would be procured for the Fuerza Aérea Argentina. Entering service in March 1968 with Grupo 8 de Caza at the Military Air Base Mariano Moreno the F-104H's served until 2006 when the last Starfighters operating anywhere in the world were finally retired. INSTRUCTIONS 1. From the AIRCRAFT folder drag and drop the F-104H folder into your Aircraft folder. 2. From the DECALS folder drag and drop the F-104H folder into your Decals folder. That's it! I've kept the loadouts to basic stock weapons but if you have Argentine weapons in your install then it's worth editing the F-104H_Loadout.ini to suit what you have. CREDITS As always, thanks to Third Wire for a great little game/sim. And, finally, thanks to everyone in the wider Third Wire community. Regards Spinners Version 1 - 27/03/2021 -
1 point
Version 1.0.0
131 downloads
The second generation of Canadair Sabre aircraft, and first to be built in quantity, was the Mk 2, with 350 produced from 1952–1953. The RCAF received 290 of these improved aircraft. During the first half of 1952, the remaining 60 Mk.2s were supplied to the U.S. Air Force for use in the Korean War. Most RCAF Mk.2 Sabres were utilized in the air defence role with NATO's No. 1 Air Division in Europe, proving itself to be an outstanding dogfighter. Others were assigned to the training role at bases in Canada. After replacement by the Sabre 5 in RCAF service from 1954, just over 210 surviving Sabre 2s were overhauled and modified in the UK and supplied in roughly equal numbers to the Greek Air Force and Turkish Air Forces. WHAT'S IN: - a new plane - 11 high rez skins - decals, sounds, weapons etc. CREDITS: - Zur model - Ravenclaw temps - paulopanz skins, decals, ini edits TO INSTALL: - all in main mod folder and overwrite NOTE: - maybe a better FM (this one is from old Sabre 4) should be needed Enjoy! @paulopanz PS: Canadair Sabre n°1 pack, to be continued soon. -
1 pointOne I took earlier - in flight that scene was special - with the amazing scenery seen moving below through the cloud.
-
1 point
-
1 pointGreat stuff guys, With BHaH II on the horizon and WOTR hopefully getting some love in he coming months then a place for the mods is an excellent idea.
-
1 point@macelena & @Wrench Here are the aircraft I was playing with to make use Air to Air rockets. F4D-1, F-86D, F-89D, and F-102A. These are more experimental than complete and I did not fly a test run before compiling them so they are as is. KJakker's Air to Air Rockets Mods.7z
-
1 pointThank you @VonS ! You have mentioned all necessary things. I'm new on CA, so let's find the best way for the user to get an overview about the BH&HII-mods. Greetings
-
1 pointView File Canadair CL-13 Sabre F.Mk.4 In mid-1952, the Sabre Mk.4 went into production with the first one flown on 28 August 1952. Apart from some minor structural and systems changes, including improved air-conditioning and gun sight, the Mk 2 and the Mk 4 were identical. Of 438 Mk 4s built, approximately 70 were used temporarily by the RCAF, all surviving examples being passed to the RAF. The other Sabre 4s went directly to the RAF under a mutual aid program, equipping 11 RAF squadrons. The majority served in West Germany with NATO, with two squadrons being based in the UK as part of RAF Fighter Command. The Sabre Mk.4 served with the RAF until mid-1956 when they were replaced by Hawker Hunters. The survivors were overhauled in the UK, fitted with '6-3' wing modifications and handed to the USAF (which had funded these aircraft) which in turn passed them on to other NATO members, with the majority going to Italy and Yugoslavia. WHAT'S IN: - 2 new planes - 23 high rez skins - decals, sounds, weapons etc. CREDITS: - Zur model - Ravenclaw temps - Wrench first SF-2 edition - paulopanz skins, decals, ini edits TO INSTALL: - all in main mod folder and overwrite Enjoy! @paulopanz PS: Canadair Sabre n°2 pack, to be continued soon. Submitter paulopanz Submitted 03/29/2021 Category F-86
-
1 pointThought people might get a laugh out of this.
-
1 pointhttps://www.patrulla-azul.com/FreeIL2modding/forum/viewtopic.php?f=15&p=26394#p26394
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point1972, the Spanish Air Force sends its soon to be disbanded 104 Squadron to Vietnam in support of Operation Linebacker. Decals by Paulopanz, Textures by Wrench, Mistakes by me
-
1 pointsome pictures showing the new vents on the bottom side and the new panel lines on nose ,fuselage and tail , the wings are next and no rivets yet and a new walkway on the top fuselage , i made a lot of new mapping on the nose section and the fuselage section still a long way to go i may need someone , as soon as the templates are done , to help me with the skins and decals and as test pilot
-
1 point
-
1 pointnot exactly perfect, but close enough to what I wanted!! (it's also a cool shot with the moon!!) thanks guys!
-
1 pointVideo of the first test of the TNC-45 I need to work next on the guns and missiles.
-
1 pointYeah, I'm sorry we didn't release this yet. We were working on a major rework of the cockpit last year, then the pandemic happened and the 3d modeller had to leave source files away from home. We restarted work recently with older source files. There's still much to do cockpit related, but I want to make sure it's a definitive release.
-
1 point
-
1 pointwell if that breaks down, you've got something to haul it back in (just as soon as two Kevins quit tormenting you )
-
1 point
-
1 point
-
1 pointBTW, Midway will be updated too. I've new hi-res (maybe mid res ) skins for deck and corrected few bugs.
-
1 point
-
1 point
-
1 pointmeasure once cut seven times. or measure 7 times and cut 3. or just keep snipping here and there til it matches thats it for tonight, get the other side in the morning
-
1 pointJust found I still have the folder in my SF2....took for spin...guess what My memory is deserting me...forgot what I had already done... bit of flutter on stailisers but thats fixable....seems vectorthrust ok
Important Information
By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..