-
Available Subscriptions
Strike Fighters by Thirdwire
All SF / WOV / WOE / WOI Simulation Modifications and Add-Ons
Subcategories
-
The Last Stand
December 14th, 1974. Being almost certain that the US wont intervene anymore, the North Vietnamese Army (NVA) launch a full scale invasion of the Republic of South Vietnam.
Defence aid to the South from the US has been drastically reduced and the South Vietnamese economy has all but collapsed. Ammo, spares and fuel are in short supply, and so is the moral of the South Vietnamese people. Your only hope is to hold out long enough to gain renewed US support.
The South VNAF currently have the Worlds fourth largest airforce thanks to the "Enhance" and "Enhance Plus" programs from the US.........
Historical only in the Aircraft, Units and Air Bases used by the VNAF squadrons. Other than that you will be limited to hitting Targets in Southern NV/South Vietnam/Laos/Cambodia only - You wont be going up North - the VNAF never had the range anyway.
Only for Wings Over Vietnam SP4 version v08.30.06 - only tested with the default terrain also - but should be no issues adding trees etc
MUST be a new install - none of the stock campaigns will work after you have installed this!
Read the instructions - they will tell you which jets to download and where from
The gamplay file should give you some hints of how the campaign should be played
Only parts of this Mod comes under the CA Freeware licencing - read the Credits file for details
Northrop F-5E Tiger II (Mirage Factory ) - CombatAce or www.column5.us
Northrop F-5A Freedom Fighter (Mirage Factory) - CombatAce or www.column5.us
Douglas A-1HVNAF and A-1JVNAF Skyraiders - Razbam “The Skyraiders Vol 2” for SF.(www.razbam.org) Payware see note below
AN-2 Colt (Pasko & Team)- www.column5.us
Bell “Armed” UH-1H “Huey” - at CombatAce - you need to get the UH-34 also as below.
Douglas AC-47 “Spooky” - “A Team” Skunkworks (http://cplengineeringllc.com/SFP1/ )
Cessna A-37B Dragonfly – “A Team” Skunkworks (http://cplengineeringllc.com/SFP1/ )
UH-34 Seabat – Only needed for the UH-1H sounds and cockpit – “A Team” Skunkworks (http://cplengineeringllc.com/SFP1/
Note1: Razbam Skyraiders Vol 2 is worth the money for the cockpit alone – however if you are stuck there is a free A-1H at CombatAce – if you do this the quickest way would be to change the campaigns data.ini and .ini files and replace the A-1HVNAF and A-1JVNAF with A-1H and the skin for the A-1H you want to use. You would then need to change the A-1H_loadout.ini.
Played and tested loads but as ever there may be some issues to resolve somewhere.
By MigBuster991 0 -
An old updated skin given some Shark Teeth for a request.
Alternate South East Asia camo scheme for the Mirage Factory F-16A Block 1 and Block 10.
size: 1024x1024
Tested on (Mirage Factory):
F-16A Block 1 (folder:F-16A_Blk1)
F-16A Block 10 (folder:F-16A_Blk10-NDC)
Inlcludes a WOE style Hangar screen and some Green Drop tanks that can be installed if wanted.
Please read the README file to ensure the decals are installed properly.
Many thanks to the Mirage Factory for the F-16 Model.
Tested in WoE but should work in SF and WOV
Press the button below to download this skin and save it to your Desktop.
Coolhand29
By MigBuster417 0 -
Game not challenging enough? - why not stop red planes appearing on the map!
Just download and copy MAPENEMYICON.tga to your "Flight folder" ie
"C:\......\WingsOverVietnam\Flight"
If you feel like you are getting shot down to much afterwards - just delete MAPENEMYICON.tga again and all will revert to normal....easy hey
tested in WOI / WOV but should work in SF/WOV/WOE/WOI/FE
Note about SF2: This will work in the strike Fighters 2 series - however TK kindly included these options in the HUDDATA.ini file (which you would need to extract from the flightdata.cat file) from June 2009 which can just be set to true or false as you need - so you can acheive the same thing from here:
[HUDLabels]
EnableLabels=FALSE
LabelFriendlyAir=TRUE
LabelFriendlyGround=TRUE
LabelEnemyAir=TRUE
LabelEnemyGround=TRUE
[MapLabels]
EnableLabels=FALSE
LabelFriendlyAir=TRUE
LabelFriendlyGround=TRUE
LabelEnemyAir=TRUE
LabelEnemyGround=TRUE
MiGBuster 2009
By MigBuster164 1 -
SF2 DLC #28: F-104A Starfighter, Pakistani Air Force 3/10/2014
= For SF2, Full-4/5 Merged, =WITH= DLC #28 (Full-5 Reccomended/Preferred) =
*DLC #28 is REQUIRED for this mod!!*
A remod skin/decal set for the DLC F-104A, recreates the Starfighter as used by the PAF.
The decals are re-used from my Indo-Pak Mod, that was based on Ajundair's old 1stGen A Zipper. Now, we're using the newest model (you all know how I hate to waste decals.... ).
Included are 98.6% historical serial numbers (albeit 2 are for 104Bs ...) as used by No. 9 Squadron, PAF. Decal randomization is set to TRUE. Also included are several inis with some additions and corrections.
The inis are:
Data.ini (operable canopy, standard keystrokes, Shift/0)
Loadout ini
main ini
Hangar screen (an SF2 revamped version of the 1stGen's F-104G)
Loadout image (bmp)
Avionics. ini
Cockpit.ini, (with working secondary ADI and oil pressure gauges, ala F-104G)
*REMINDER!!! You =MUST= have DLC #28 to have access to the aircraft's LOD.*
As always, fairly easy to follow, yet detailed install instructions are included. So, please -READ- them!!
Happy Landings!
Wrench
Kevin Stein
By Wrench159 0 -
SF2 WW2 DLC #28 S-99 (Bf-109G) Mod Pak 3/10/2014
-- Something for the WW2 players --
= For SF2, Full-5 Merged (Reccomended/Preferred) =
*You =MUST= have DLC #28 to gain access to the stock 3W S-99 Lods*
Some modifications to the DLC Avia S-99, 'backdate' it to its WW2 beginnings.
The aircraft has had several modifications, not the least of which is the
renaming to BF-109.
The skin is a 'base' light grey (RLM 81?). All new panel and rivet lines have
been drawn in. There is NO camoflague pattern, nor are the control surfaces
fabric lines drawn in.
The templates I created ARE included, in the hopes someone can make use of them
and finish off the aircraft. Due to the resolution of the stock skins I used, I
was unable to see the control surface lines well enough, or to find a drawing
that matched well enough to try drawing them.
Several ini mods add a 'fake pilot' belly rack, so the drop tank or single bomb
will have something to attach too (as the Lod does NOT have this mesh). Some
modification to FM statements try to bring it closer to published data. It may
need further tuning by experts.
Canopy opens with the Standard Animation Keystroke (Shift/0)
The skin included is a 'base' Luftwaffe (albeit, again with no camo). The
markings represent 11/JG 77 in late 1944. All markings are decals, and decal
randomization is TRUE.
When in-game, you'll see:
Bf-109G10 (3W)
As always, fairly easy to follow, yet detailed install instructions are
included. So, please =READ= them BEFORE installing this mod!!!.
With any luck, one of our Expert skinners will grab this, and give us some
nice Luftwaffe skins.
Happy Hunting!
Wrench
Kevin Stein
By Wrench442 0 -
SF2 WW2 MTO USAAF P-40F Pak 2/24/2014
-- Something for the WW2 MTO players --
= For SF2 ONLY, Full-5 Merged (Reccomended/Preferred) =
*Note: this pak MAY be usable in 1stGen SF/Wo* game installs. However, some features (decal randomization and FM adjustments and several other things) will =NOT= be functional. Use in 1stGens has not, and cannot be, tested by me.*
**Notex2: this mod is designed for use =ONLY= in a MTO-Centric mods folder**
At first, I was just going to do a simple skin/decals pack. But with all the "modifications" made to fit into SF2 chose to take the "lazy man's way out" and am just uploading the entire aircraft. So, if you already have Raven's P-40F in your MTO-centric mods folder, best to back it up someplace. You can, of course, re-add any other skins at your convience.
This is the full aircraft, with my 'tweeked' sf2-ish data ini. The skin included is for...
64th FS, 57 FG "Black Scorpions"
as seen from late 1942 in North Africa.
Skins remain in their bmp format.
New DDS damage textures (usable on all Raven's Warhawk/Kittyhawk in SF2 only) are included!
All markings are decals, and Decal Randomization is TRUE. There are no nose arts. Also, via the use of my (patent pending) fake "SqTail" decal, the squadron name display is now active on the Loadout Screen.
No weapons are included, except an SF2 Version of the drop tank (for those that haven't converted it yet). New theatre-specific Hangar and Loading screens are included, too. Actually, you have 2 loadings screens to choose from.
When in-game, on the aircraft selection drop-down, you'll see
P-40F-5 CU (Raven)
This will diferentiate this for any other Warhawks you may (or may not) have.
As always, fairly easy to follow, yet detailed install instructions are included. PLEASE read them!!
Good Hunting!!
Wrench
Kevin Stein
By Wrench199 0 -
This is the updated version of Black Sea 2.0 for the Strike Fighters 2 series. Please read the README for complete instructions.
As always, this file follows the CombatAce Modders Agreement, please do not use for payware.
By PFunk1,021 3 -
This pack consists of three planes. The stock F-4J, F-100D and Ravenclaws F-4E (HAF) have been modded to create planes for the Dhimari Air Force:
1. EF-4Dh Desert Phantom II, 4th Squadron "The Falcons"
2. F-100Dh Desert Sabre, 11th Squadron "The Rams"
3. JF-4Dh Desert Phantom, 2nd Squadron "The Hawks"
INSTRUCTIONS
1. Drop the Folders into your Strike Fighters Mod Folder.
2. If asked to overwrite, click yes.
ADDENDUM:
The planes fly for the USAF, since I don't own Strike Fighters 2
If you have SF2, then simply change the NationName in the corresponding data.inis and userlist.inis
I added a color sheet into this package so everybody can feel free to create his own dhimari desert aggressor skin.
ALTERNATE NOSE CAMO FOR THE EF-4Dh
Furthermore, there is a folder called "Alternate camo versions EF-4Dh" which includes two folders: Black Nose and Camo Nose. Those folders contain a JPG and a decals.ini each.
The EF-4Dh comes standard with the black nose. If you want to fly with a camoed nose, simply copy the contents of the folder "Camo nose" to the skin folder and overwrite.
If you want to return to the standard black nose, simply copy the contents of the black nose folder and paste them into the skin folder.
This applies to the EF-4Dh only!
CREDITS
There are several people I have to thank:
Big Thanks to Thirdwire for the games and the superb models they have.
Ravenclaw_007 for his great F-4 (HAF) I used as a base for the EF-4Dh and the great templates for the Phantom.
Spinners for the dhimari decals and the sharkmouth decal from the F-100 I've been using to create this mod.
Sundowners Sharkmouth included in his F-105 Template I used for the EF-4Dh and JF-4Dh.
If I missed someone, please let me know and I correct it ASAP.
Kindest regards
ValAstur
By ValAstur274 2
-
Download Statistics
14,424
Files12,646
Comments27,019
Reviews
