This is a modern Russian MiG-23 Skin Type 98. Upgraded radar "Mosquito-23" and can carry AA-12. One plane was built. Good hunting.

SF2 A-4B Skyhawk VA-95 Det Q Skin/Decals Pack              2/15/2018
= For SF2 (Any & All, Full-5 Merged Prefered) =
*Can be used in any install that has access to the A-4B*
A new skin for the A-4B Skyhawk. Also included, are a modified Data and loadout inis, correcting/adding to the Mission tasking loadouts, Player operated manual canopy, and the landing light.
The skin included is for:
VA-95, Det.Q
embarked aboard USS BENNINGTON (CVS-20) circa 1964/64, in the Western Pacific
When in-game, on the skin selection dropdown panel, you'll see:
VA-95 Det Q (CVS-20,1964)
Skins remain in their "as issued via 3W" stock bmp format. Most markings are decals, excepting certain color tags or other markings on the rudder   These had to be painted on due to number-of-decals-per-mesh restrictions. There are 10 Modex and serial numbers (BuNums). All BuAerNums ARE historiclly correct; but not all could be matched to their corresponding Modex. 
 
Historically speaking, these A-4 squadrons (and/or detachments) were assigned to the Essex class carriers that had been convered to "CVS" or anti-submarine warfare carriers. The Skyhawks embarked were not only tasked with light strike, but Combat Air Patrols to protect the ship and the ASW assets.
The canopy uses the Standard Animation Keystroke (tm), Shift/0.
When in-game, on the skin selection dropdown panel, you'll see:
VA-93 Det Q (CVS-20,1964)
As always, fairly easy to follow, detailed install instructions are included. So, please read them .... 
Happy Landings!
Wrench
Kevin Stein
 

This is a simple skin mod for the F-111A to give an RAF machine with markings for No.6 squadron.
Serial numbers are now included but if you want a more comprehensive RAF F-111 then check out the F-111K pack!
Just pop this skin in your F-111A folder and go save Dhimari.

INSTRUCTIONS
1. Drop the skin folder '6RAF' into your F-111A folder.

CREDITS
Thanks to TK for a great little game/sim.
And thanks to everyone in the wider Third Wire community.
Regards
Spinners
Version 2 - 05/03/18
Version 1 - 26/01/09
 

Hawker Hunter FGA.9, No.8 Squadron, Royal Air Force for STRIKE FIGHTERS 1
This is a quick decal conversion of the sublime Third Wire Hunter FGA.9 to enable you to fly a No.8 squadron machine.
This will only work in Wings Over Europe but you can, of course, also make it work in the other Third Wire 'Series One' games by extracting and exporting all of the relevant files. Since originally releasing this I've added Syrinx's fuselage serial numbers for the Hunter and included a nice loading screen and tweaked the hangar screen to give it 1960's three colour roundels.

INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the HunterFGA9 folder into your Aircraft folder.
2. From the DECALS folder drag and drop the HunterFGA9 into your Decals folder.

CREDITS
Thanks to TK for a great little game/sim.
Thanks to former member Syrinx for making the fuselage serial numbers.
And thanks to everyone in the wider Third Wire community.
Regards
Spinners
Version 2 - 05/03/18
Version 1 - 02/10/08
 

McDonnell Douglas Hornet F.2 for STRIKE FIGHTERS 1
This is a 'what if' RAF Hornet F.2 interceptor with markings for No.5 squadron of the Royal Air Force.
Erwin_hans was good enough to release a blank skin so it was a easy to knock-up an RAF Superbug. This is a fine add-on aircraft for 'Strike Fighters 1' and 101tfs and Erwin_hans have created a true masterpiece  - one of the very best add-ons available and I'd like to thank them for their hard work in bringing this aeroplane to us. Please note that in this revision I've simplified the effects and sounds to use stock files and you'll want to change the loadout.ini to suit the weapons you've got as, again, I've left it to stock.

INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the HORNETF2 folder into your Aircraft folder.
2. From the DECALS folder drag and drop the HORNETF2 into your Decals folder.
P.S. Remember to set your Single Mission EndYear=2010,2020,2040 or whatever in your Options.Ini!

CREDITS
Thanks to TK for a great little game/sim.
Thanks to 101tfs and Erwin_hans for creating the first F/A-18F.
And thanks to everyone in the wider Third Wire community.

Regards
Spinners
Version 2 - 04/03/18
Version 1 - 02/08/08
P.S. Remember to set your Single Mission EndYear=2010,2020,2040 or whatever in your Options.Ini!

Republic Aviation Thunderstreak FGA.2 for STRIKE FIGHTERS 1
This is a 'what if' Thunderstreak FGA.2 with markings for No.31 squadron in a SEA Camo by whiteknight06604.
 
Regarding the Thunderstreak in RAF service then there is no backstory but perhaps the UK needed some muscle when the Supermarine Swift started going pear-shaped!

INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the THUNDERSTREAKFGA2 folder into your Aircraft folder.
2. From the DECALS folder drag and drop the THUNDERSTREAKFGA2 folder into your main Decals folder.
Please note that I've simplified things by using the stock F-105 tanks.

CREDITS
Special thanks to the guys listed below - great work and especially the flight model!
Thanks to whiteknight06604 for the SEA Camo for his Greek F-84F.
Thanks to Third Wire for the continuous improvement of a great little game/sim.
And thanks to everyone in the wider Third Wire community.
Regards
Spinners
Version 2 - 05/03/18

Republic Aviation Thunderstreak FGA.1 for STRIKE FIGHTERS 1
This is a 'what if' Thunderstreak FGA.1 with markings for No.20 squadron in a Desert Camo by whiteknight06604.
 
Regarding the Thunderstreak in RAF service then there is no backstory but perhaps the UK needed some muscle when the Supermarine Swift started going pear-shaped!

INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the THUNDERSTREAKFGA1 folder into your Aircraft folder.
2. From the DECALS folder drag and drop the THUNDERSTREAKFGA1 folder into your main Decals folder.
Please note that I've simplified things by using the stock F-105 tanks.

CREDITS
Special thanks to the guys listed below - great work and especially the flight model!
Thanks to whiteknight06604 for the Desert Camo.
Thanks to Third Wire for the continuous improvement of a great little game/sim.
And thanks to everyone in the wider Third Wire community.
Regards
Spinners
Version 2 - 30/12/13

SF2 F-111F Aardvarks from USAF/E 48th Liberty Wing. The 492nd, 493rd, 494th and 495th TFS!
By Viper with INIs by Fanatic Modder
-------------------------------------------------------------
This mod was intended as an update to FastCargo's Super Vark Package (See link below), but it can be a standalone mod if you just want the USAF F-111s included in this pack. If you want to install both packs, FastCargo's pack must be installed first as that is the older pack.
You can get FastCargo's pack here...
http://combatace.com/files/file/10425-f-111-super-vark-pack-version-24/
-------------------------------------------------------------
What's included in this mod pack?
-------------------------------------------------------------
* F-111F Aardvarks from USAF/E 48th Liberty Wing. The 492nd, 493rd, 494th and 495th TFS!
http://combatace.com/files/file/15510-sf2-updated-f-111f-aardvarks-from-usafe-48th-liberty-wing-the-492nd-493rd-494th-and-495th-tfs/
-------------------------------------------------------------
Installation:
-------------------------------------------------------------
I recommend that you back up your mod folder (or just the Effects, \Objects\Aircraft\F-111F, and \Objects\Decals\F-111F folders). I just make a copy the mod folder, try the mod, if I like it, I delete the backup. If I don't, I delete the new/updated mod folder and rename the old backup/copy back to the original names to reset to my original setup.
* To install, simply unzip and copy the contents of the "To_Mod_Folder" folder (the uncompressed "Effects and Objects" folders only) to your StrikeFighter2 mod folder and Overwrite.
My StrikeFighter2 mod on Win97 64-bit was..(yours may be different)...
C:\Users\<your_id>\Saved Games\Thirdwire\StrikeFighter2 Europe\
Note: You should be able to install this mod into any SF2 series, it doesn't have to be StrikeFighter2 Europe.
* To remove, simply delete the active "Effects and Objects" folders and replace with the back up copies you made prior to the install.
-------------------------------------------------------------
Add F111 SoundList
-------------------------------------------------------------
Lastly, Read the "Add F111 SoundList.txt" readme file on updating your your "Flight\SoundList.ini" file with the custiom F-111 sound files included in this pack.
-------------------------------------------------------------
Thats it - Enjoy!
Please report any bugs or issues via the "Support Topic" link...
=Viper=
-------------------------------------------------------------
-------------------------------------------------------------
Credits:
-------------------------------------------------------------
-------------------------------------------------------------
If you're interested in some of the mods I referenced/used in my mod (can't say it's mine really, my contribution?)...here they are! Excellent mods all!
* FastCargo's Super Vark package 2.4 (SF2)
http://combatace.com/files/file/10425-f-111-super-vark-pack-version-24/
* Slick Cowboy's F-111_improvedskinpack 2.0 (SF2)
http://combatace.com/files/file/14798-f-111-improvedskinpack/
* Dave's EF-111A Version 2.0 (SF1)
http://combatace.com/topic/36438-ef-111a-version-20/
* LeL's F-111 TAC Pack (SF1)
http://combatace.com/topic/80711-f-111-tac-pack/
* Spinners [Fictional] General Dynamics F-111A 'Early TAC' Version 1
http://combatace.com/files/file/14574-fictional-general-dynamics-f-111a-early-tac/
* Hi Ho Silver - The Afterburner Mod v.1 (SF1/SF2)
http://combatace.com/files/file/15143-the-afterburner-mod/
* Florian - "AmokFloo" - Western Style Pilot Models (SF1/SF2)
http://combatace.com/files/file/6693-western-style-pilot-models/
F-111D Additions! Ravenclaw for the weapon models. dtmdragon the avionics, cockpit repaint, loadout.ini, what if AIM-7G, data.ini overhaul and repackaging with the updated skins. FANATIC MODDER and LeL helped with the data/loadout.ini information and testing.
 
Thank you all for your contributions!!